It turns out that /lib/init/rw doesn't exist in early boot
like I thought. So give up on that idea and just use
/dev/.mdadm/ for files that must persist from early-boot
to regular boot.
Signed-off-by: NeilBrown <neilb@suse.de>
We now have 3 directory definitions: mdmon directory for its pid and
sock files (compile time define, not changable at run time), mdmonitor
directory which is for the mdadm monitor mode pid file (can only be
passed in via command line at the time mdadm is invoked in monitor mode),
and the directory for the mdadm incremental assembly map file (compile
time define, not changable at run time). Only the mdadm map file still
hunts multiple locations, and the number of locations has been reduced
to /var/run and the compile time specified location. Re-use of similar
sounding defines that actually didn't denote their actual usage at
compile time made it more difficult for a person to know what affect
changing the compile time defines would have on the resulting programs.
This patch renames the various defines to clearly identify which item
the define affects. It also reduces the number of various directories
which will be searched for these files as this has lead to confusion
in mdadm and mdmon in terms of which files should take precedence when
files exist in multiple locations, etc. It's best if the person
compiling the program intentionally and with planning selects the
right directories to be used for the various purposes. Which directory
is right depends on which items you are talking about and what boot
loader your system uses and what initramfs generation program your
system uses. Because of the inter-dependency of all these items it
would typically be up to the distribution that mdadm is being integrated
into to select the correct values for these defines.
Signed-off-by: Doug Ledford <dledford@redhat.com>
GET_ARRAY_INFO always succeeds on an inactive container, so we need to
be a bit more diligent about adding a disk to an active container.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
--test can be given in Manage mode.
This can be used when there is an attempt to fail or remove 'faulty',
'failed' or 'detached' devices, or to re-add 'missing' devices.
If no devices were failed, removed, or re-added, then mdadm will
exit with status '2'.
Signed-off-by: NeilBrown <neilb@suse.de>
This can be used for hot-unplug. When a device has been remove,
udev can call
mdadm --incremental --fail sda
and mdadm will find the array holding sda and remove sda from
the array.
Based on code from Doug Ledford <dledford@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This allows finding the array which contains a given component.
Components are named using the kernel-internal string name such
as "sda1" or "hdb".
Don't return member arrays, only the contain that contains them.
Also tidy up the parsing of 'inactive' arrays in /proc/mdstat.
If we see 'inactive' we need to set 'in_devs' immediately as there
is no level coming.
Signed-off-by: NeilBrown <neilb@suse.de>
Allow the name of the array stored in the metadata to be updated. In
some cases the metadata format may not be able to support this rename
without modifying the UUID. In these cases the request will be blocked.
Otherwise we allow the rename to take place, even for active arrays.
This assumes that the user understands the difference between the kernel
node name, the device node symlink name, and the metadata specific name.
Anticipating further need to modify subarrays in-place, introduce the
->update_subarray() superswitch method. A future potential use
case is setting storage pool (spare-group) identifiers.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
...i.e. GET_DEVS == (GET_DEVS|SKIP_GONE_DEVS)
A null pointer dereference in Incremental.c can be triggered by
replugging a disk while the old name is in use. When mdadm -I is called
on the new disk we fail the call to sysfs_read(). I audited all the
locations that use GET_DEVS and it appears they can tolerate missing a
drive. So just make SKIP_GONE_DEVS the default behaviour.
Also fix up remaining unchecked usages of the sysfs_read() return value.
Reported-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Make create check with the appropriate meta data handler and see what the
largest chunk size is supported. The current 512K default is not supported
by existing imsm OROM.
[dan.j.williams@intel.com: trim the upper limit to 512k for future oroms]
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Support for deleting a subarray out of a container. When all subarrays
are deleted the component devices are converted back into spares, a
--zero-superblock is still needed to kill the remaining metadata at this
point. This operation is blocked when the subarray is active and may
also be blocked by the metadata handler when deleting the subarray might
change the uuid of other active subarrays. For example, with imsm,
deleting subarray 'n' may change the uuid of subarrays with indexes > n.
Deleting a subarray needs to be a container wide event to ensure
disks that record the modified subarray list perceive other disks that
did not receive this change as out of date.
Notes:
The st->subarray parsing in super-intel.c and super-ddf.c is updated to
be more strict now that we are reading user supplied subarray values.
Offline container modification shares actions that mdmon typically
handles so promote is_container_member() and version_to_superswitch()
(formerly find_metadata_methods()) to generic utility functions for the
cases where mdadm performs the operation.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This is needed for imsm where:
1/ we want to report raid_disks as zero to allow mdadm -As to
incorporate all spares
2/ we can't determine stale disks by looking at the event counts.
3/ we can't see per-subarray expectations with the info returned from
the container level ->getinfo_super()
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
These metadata are not expected on partitions, and they have
no way of differentiation whether which is correct if they
are found both on the device and on the last partition.
So if the device is a partition, refuse to read the metadata.
Signed-off-by: NeilBrown <neilb@suse.de>
mdadm prevents creation when device names are duplicated on the command
line, but leaves the partially created array intact. Detect this case
in the error code from add_to_super() and cleanup the partially created
array. The imsm handler is updated to report this conflict in
add_to_super_imsm_volume().
Note that since neither mdmon, nor userspace for that matter, ever saw an
active array we only need to perform a subset of the cleanup actions.
So call ioctl(STOP_ARRAY) directly and arrange for Create() to cleanup
the map file rather than calling Manage_runstop().
Reported-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Currently "mdadm -As" will process the entries in the config
file in order. If any array is a component or member of a preceding
array, that array will not be assembled.
So if there are any failures during assembly, retry those arrays,
and look until everything is assembled, or nothing more can
be assembled.
Signed-off-by: NeilBrown <neilb@suse.de>
Monitoring /proc/mounts and creating a .pid file as soon as /var/run
is writable is racy. Most distros clean all non-directories from
/var/run early in boot and if mdmon races with this it could
lose the files as soon as they are created.
Instead require that "mdmon --takeover" be run after /var is writable.
Signed-off-by: NeilBrown <neilb@suse.de>
/var/run probably doesn't persist from early boot.
So if necessary, store in in /lib/init/rw or somewhere else
that does persist.
Signed-off-by: NeilBrown <neilb@suse.de>
Unlike native md checkpointing some data about the geometry and type of
the migration process is coded into curr_migr_unit. Provide logic to
convert between md/{resync_start|recovery_start} and imsm/curr_migr_unit.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Minimal changes needed to permit reassembling partially recovered
external metadata arrays. The biggest logical change is that
->container_content() can now surface partially rebuilt members rather
than omitting them from the disk list.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Replace occurrences of ~0ULL to make it clear we are talking about maximal
resync/recovery position.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The patch increases the capacity of buffers used to store
sysfs path names. Originally the buffers were too small to
hold the canonical representation of sysfs path (in case
of a SAS device, especially a device installed behind an
expander).
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Reviewed-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When creating an array, check if the devices have partition
tables and print a warning if the table or the partitions might be
destroyed by array creation.
Signed-off-by: NeilBrown <neilb@suse.de>
- When --kill-superblock is used with --metadata, find every
different superblock if there are several and kill them all.
- When creating a new array, kill off any old metadata. The code
to do this was already present but has become broken over time.
Signed-off-by: NeilBrown <neilb@suse.de>
ie. the percent increments after which RebuildNN event is generated
This is particulary useful when using --program option, rather than
(only) syslog for alerts.
Signed-off-by: Zdenek Behan <rain@matfyz.cz>
Signed-off-by: NeilBrown <neilb@suse.de>
Connect to the monitor in the old namespace and use that connection for
WaitClean requests when stopping the victim mdmon instance. This allows
ping_monitor() to work post chroot().
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The load_super() from an mdadm --detail call may race against an mdmon
update. When this happens the load_super sees an inconsistent metadata
block and returns an error. The fallback path to use the map file
contents lacks uuid reporting, so provide __fname_from_uuid for
generically printing a uuid.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When disks have conflicting container memberships (same container ids
but incompatible member arrays) --update=uuid can be used to move
offenders to a new container id by changing 'orig_family_num'.
Note that this only supports random updates of the uuid as the actual
uuid is synthesized. We also need to communicate the new
'orig_family_num' value to all disks involved in the update. A new
field 'update_private' is added to struct mdinfo to allow this
information to be transmitted.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
A previous patch moved move the '--examine --brief' reporting of
member arrays to before their containers. This breaks "mdadm -As"
assembly. So put them back, but still fix the problem addressed by
previous patch.
Signed-off-by: NeilBrown <neilb@suse.de>
The family_number field can change. The option-rom will change the
family number when it starts a rebuild process (flags a container for
rebuild). This was not seen previously as mdadm would usually start the
rebuild process, preserving the family number.
This is the mechanism that helps to prevent a prodigal array member from
being returned to its original system and cause a rebuild to go in the
wrong direction. With the change we will end up with a container that
will fail to assemble unless the device with the incompatible family
number is left out of the assembly.
So, take several actions:
1/ Convert uuid generation to use orig_family_num, being careful to
preserve the existing uuid in the case where orig_family_num is not
set (i.e. previous mdadm created imsm arrays)
2/ Set orig_family_num at Create. For arrays created by mdadm prior to
this release orig_family_num will be zero, so set it to family_num at
the first metadata write.
3/ Add checks for orig_family_num to compare_super_imsm
4/ Update the family number when initiating rebuild
5/ The option-rom mixes some random data into the family number, add
this functionality to the mdadm implementation.
Reported-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This allows the layout to be parsed after the current level of the
array is know, so that the level doesn't need to be given (otherwise
pointlessly) on the command line.
Signed-off-by: NeilBrown <neilb@suse.de>
Bother Manage_reconfig and Grow_reshape provide for changing
the 'layout' of a faulty array. This is no necessary.
So discard Manage_reconfig and just use Grow_reshape
Signed-off-by: NeilBrown <neilb@suse.de>
With 2.6.30 it is possible to tell the md driver to clip an array to a
size smaller than the real size of the array. This option gives
access to that feature. The size change does not persist
across restarts.
Signed-off-by: NeilBrown <neilb@suse.de>
When rebuilding the mapfile (mdadm -Ir), if not appropriate name is
found in /dev/md/, try to find an appropriate name, either by looking
in mdadm.conf or by using the name in the metadata.
Signed-off-by: NeilBrown <neilb@suse.de>
If mdadm.conf contains
HOMEHOST <ignore>
or commandline contains
--homehost=<ignore>
then the check that array metadata mentions the given homehost is
replace by a check that the name recorded in the metadata is not
already used by some other array mentioned in mdadm.conf.
This allows more arrays to use their native name rather than having
an _NN suffix added.
This should only be used during boot time if all arrays required for
normal boot are listed in mdadm.conf.
If auto-assembly is used to find all array during boot, then the
HOMEHOST feature should be used to ensure there is no room for
confusion in choosing array names, and so it should not be set
to <ignore>.
Signed-off-by: NeilBrown <neilb@suse.de>
Because ---examine --brief, or --detail --brief are
often used to create mdadm.conf, and because people don't want to
have to update their mdadm.conf unnecessarily, we don't want to
include information that might change.
And now that level changing is supported, that is almost everything
but UUID.
So move some more fields into the "Only print with --verbose" class.
Signed-off-by: NeilBrown <neilb@suse.de>
The line 'auto' in mdadm.conf can be used to disable assembly
of specific metadata types, or of all arrays.
This does not affect assembly of arrays listed in mdadm.conf
or on command line.
auto -all
will disable all auto-assembly.
auto -ddf
will cause mdadm to ignore ddf arrays that are not explicitly
mentioned, and auto assemble anything else it finds.
Signed-off-by: NeilBrown <neilb@suse.de>
This patch enables the --size parameter for build operations.
Without this, if you have a raid1, for instance, where the 2 disks are
not the exact same size, and you need to build the array but one of the
disks is not available right at the moment (maybe it's USB and it's
unplugged, or maybe it's a network disk and it's unavailable), then you
have to play some weird games to get the array to size correctly (that
is, to the size of the smaller of the two components or less).
There may be other uses for this too...
--
Paul
Signed-off-by: NeilBrown <neilb@suse.de>
When building container members with -IR, we need to ensure that
devices added to an active array preserve the 'in_sync' status so they
don't needlessly get rebuilt.
So allow sysfs_add_disk to do this (only works in kernels since
2.6.30) and pass the relevant flag down.
Signed-off-by: NeilBrown <neilb@suse.de>
For short reshapes the kernel may be done before mdadm can check that
progress has passed the critical section.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
imsm arrays round down the effective array size to the closest 1
megabyte boundary so teach get_info_super_imsm and sysfs_set_array to
set 'md/array_size' if available (and make sure ddf uses the default
size).
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
wait not only for the name to appear, but for it to refer to the
correct device.
Sometimes old symlinks left lying around can be confusing.
Signed-off-by: NeilBrown <neilb@suse.de>
If an array reshape completed within 1 second, then --grow will not
notice that it has finished and will keep waiting for the critical
section to pass.
So be more cautious in the test.
Signed-off-by: NeilBrown <neilb@suse.de>
DDF raid6 layouts are subtly different from the standard 'md' layouts.
From 2.6.30 the kernel knows about these.
Teach mdadm about them, and also allow 'ddf' to set an appropriate default.
Signed-off-by: NeilBrown <neilb@suse.de>
All operations that rely on loading from an existing container (like
--add) will fail after a disk has been removed. Provide an option to
skip missing / offline disks rather than abort. We attempt to do this
in the load_super_{imsm,ddf}_all cases when mdmon is running i.e. we
already have a consitent version of the metadata running in the system.
Otherwise, we fail as normal and let the administrator fix up the
container.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-12-08 Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
* Makefile (dadm.uclibc): Remove misspelled and unneeded rule.
* md5.h: Include stdint.h for uClibc.
* mdadm.h: uClibc defines __UCLIBC__. If uClibc has LFS off
then use lseek instead of lseek64.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
If the metadata handler can not find its platform support components
then there is no way for it to verify that the raid configuration will
be supported by the option-rom. Provide a generic method for metadata
handlers to warn the user that the array they are about to create may
not work as intended with a given platform.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Let handlers specifiy their own defaults, specifically needed for the
imsm-raid5 case where mdadm defaults to 'ls' and imsm to 'la'.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Metadata formats like imsm work in concert with platform firmware and
hardware, so provide a way for mdadm to display this info to the user.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
If, when creating an array, a signal target device is given which
is a container, then allow the metadata handler to choose which
devices to use.
This is currently only supported for DDF.
Signed-off-by: NeilBrown <neilb@suse.de>
Now that names in /dev are usually created (eventually) by udev,
it isn't really safe to rely in finding a name in /dev to pass to
mdmon to identify which array to monitor.
And it isn't really necessary to have a name in /dev.
So just pass the symbolic name, e.g. md127 or md123.
Change util.c to pass that name, and change mdmon to process the
name sensibly.
Signed-off-by: NeilBrown <neilb@suse.de>
It is possible for the mapfile to become wrong, and that gets
very confusing. So validate entries before returning them.
Signed-off-by: NeilBrown <neilb@suse.de>
Rather than appending the md minor number, we now append a small
sequence number to make sure name in /dev/md/ that aren't LOCAL are
unique. As the map file is locked while we do this, we are sure
of no losing any races.
Signed-off-by: NeilBrown <neilb@suse.de>
Try to treat members of containers much like other arrays for
assembly.
We still look through the list of devices for a match (it will be
the container), then find the relevant 'info' and try to assemble
the array.
Signed-off-by: NeilBrown <neilb@suse.de>
Factor out, from Incremental_container, the code for assembling an
array based on information extracted from a container. We will
shortly use this from Assemble too.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This only applies if udev isn't installed or is disabled
by MDADM_NO_UDEV
We try to remove partitions too.
We find names to remove by looking in /var/run/mdadm/map
Signed-off-by: NeilBrown <neilb@suse.de>
When a 'container' gets started, we need udev to notice, but the
kernel has no way of knowing that a KOBJ_CHANGE event is needed. So
send one directly via the 'uevent' sysfs attribute.
Also, uevents don't get generated when md arrays are stopped (prior to
2.6.28) so send 'change' events then too.
Signed-off-by: NeilBrown <neilb@suse.de>
When mdadm.conf is automatically generated, we might not know a
suitable /dev/name. But we do know the uuid of the container.
So allow that as an option.
Signed-off-by: NeilBrown <neilb@suse.de>
Change the "env_check_mdmon" function to be more generic, accepting
and environment variable name, as soon we will have a new use for it.
Signed-off-by: NeilBrown <neilb@suse.de>
We will shortly be feeding more information into the process of
creating array devices, so delay the creation. Still open them
early if the device already exists.
This involves making sure the autof flag is in the right place
so that it can be found at creation time.
Also, Assemble, Build, and Create now always close 'mdfd'.
Signed-off-by: NeilBrown <neilb@suse.de>
This reflect that fact that more often than not it is creating things
in /dev, and allows for a new open_mddev which does just that.
Signed-off-by: NeilBrown <neilb@suse.de>
Given an mdadm.conf like the following allow /dev/imsm and /dev/md/r1 to be
created by "mdadm -As".
DEVICES partitions
ARRAY /dev/imsm metadata=imsm auto=md UUID=b98f5dbe-aa859e7b-0e369b89-a80986d4
ARRAY /dev/md/r1 container=/dev/imsm member=0 auto=mdp UUID=3538e39c-b397c2e9-1aa031f9-2bc0eca4
spares=1
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Previously it was possible to set the WRITEMOSTLY flag when
adding a device to an array, but not to clear the flag when re-adding.
This is now possible with --readwrite.
Signed-off-by: NeilBrown <neilb@suse.de>
The uuid returned for an imsm spare device will never match the uuid of an
active disk. So make mdadm interpret a uuid of all f's as "match any".
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When arrays do not startup correctly it would be nice to know why. Need
to move the dprintf definition to mdadm.h
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Showing e.g.
near=1, far=2
for the 'far2' layout of raid10 is confusing even though there is a
sense in which is it correct.
Make it less confusing by only printing whichever number is not 1.
If both are 1, make that clear too (i.e. no redundancy).
When adding a device to an array, we check that it is large enough.
Currently the check makes sure there is also room for a reasonably
sized bitmap. But if the array doesn't have a bitmap, then this test
might be too restrictive.
So when adding, only insist there is enough space for the current
bitmap.
When Creating, still require room for the standard sized bitmap.
This resolved Debian Bug 500309
For now, this means that the lack of a homehost doesn't always prevent
assembly.
Soon we will allow assembly anyway, but have different messages if
homehost isn't supported.
mdadm -I /dev/part-of-container
should add that to a container, creating if it needed,
and then try to assemble any arrays in the container.
Signed-off-by: NeilBrown <neilb@suse.de>
When we assemble an array, there are three different approaches
depending on whether metadata is internal or external, and on
kernel version.
Move all this to a common helper instead of duplicating in 3 places.
Signed-off-by: NeilBrown <neilb@suse.de>
The variety of approaches to 'add_disk' are factored out into
a separate function, and Incremental mode benefits by being
closer to supporting the assembly of containers.
Also remove the adding-to-array-data-structure out of sysfs_add_disk
and into add_disk.
And add some tests for --incremental mode to make sure we don't break it.
Signed-off-by: NeilBrown <neilb@suse.de>
Make --detail on a container more useful by suppressing irrelevant
detail and adding useful detail like a list of member arrays.
Ditto for members of a container: report the name of the container
array.
Signed-off-by: NeilBrown <neilb@suse.de>
For use in distro shutdown scripts with a RAID root file system.
Returns immediately if the array is 'readonly', or not an externally
managed array. It is up to the distro's scripts to make sure no new
writes hit the device after this returns 'true'.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The action we are waiting for may not be complete until the monitor has
had a chance to take action on the result.
The following script can now remove the device on the first attempt,
versus a few attempts with the original Wait():
#!/bin/bash
#export MDADM_NO_MDMON=1
export IMSM_DEVNAME_AS_SERIAL=1
./mdadm -Ss
./mdadm --zero-superblock /dev/loop[0-3]
echo 2 > /proc/sys/dev/raid/speed_limit_max
./mdadm --create /dev/imsm /dev/loop[0-3] -n 4 -e imsm -a md
./mdadm --create /dev/md/r1 /dev/loop[0-3] -n 4 -l 5 --force -a mdp
./mdadm --fail /dev/md/r1 /dev/loop3
./mdadm --wait /dev/md/r1
x=0
while ! ./mdadm --remove /dev/imsm /dev/loop3 > /dev/null 2>&1
do
x=$((x+1))
done
echo "removed after $x attempts"
./mdadm --add /dev/imsm /dev/loop3
Include 2 small cleanups:
* remove the almost open coded fd2devnum() in Wait() by introducing a
new utility routine stat2devnum()
* teach connect_monitor() to parse the container device from a subarray
string
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
If the metadata_version is
-mdXXX/whatever
rather than
/mdXXX/whatever
then the array is readonly and should be left alone by mdmon.
Signed-off-by: NeilBrown <neilb@suse.de>
We are about to change the syntax of the version string
for 'subarray's. So factor out the test into a single function.
Signed-off-by: NeilBrown <neilb@suse.de>
When we first start an array, it might be good to start recovery
straight away. That requires setting the array to 'dirty', but
only the metadata handler can know if that is required or not.
So have a third possible 'consistent' option to set_array_state.
Either 'no' or 'yes' or 'you choose'.
Return value indicates what was chosen.
'1' (no) should be chosen unless there is a good reason.
Signed-off-by: NeilBrown <neilb@suse.de>
Transition readauto arrays to active before failing drives.
Hmm... why do we keep reblocking / renotifying in the readonly case?
Need to bottom out on this, but not right now.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The cmd_filter patch merged for 2.6.27 broke retrieving the serial
number via an ioctl to /dev/sgN. In debugging this I found that other
utilities like sdparm simply run the ioctl on /dev/sdX. So just convert
to that for protection in numbers, but scream on the mailing list for
the inconvenience grr...
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Using buffered IO risks non-atomic updates to parts of the
device that we don't actually want to write to. This isn't in
general safe.
So switch to O_DIRECT for all that IO and make sure we have
properly aligned buffers.
The returned value was never used, and we don't really want
this return path anyway as writing to a pipe could conceivably
block, and the monitor must not block.
This really should be done in mdadm, not mdmon.
We ensure the device won't be suddenly commited as a hot-spare
using O_EXCL, then check the 'holders' sysfs directory
to make sure it is only in use once.
When loading the metadata for a subarray (super_by_fd), we set
->subarray to be the name read from md/metadata_version so that
getinfo_super can return info about the correct array.
With this we can differentiate between a container and
an array within the container by looking at ->subarray[0].
Only one superswitch should be externally visible for each
general type. Others which handle different flavours
(e.g. container/data-array) should be internal only.
Code in manager can now just call queue_metadata_update with a
(freeable) buf holding the update, and it will get passed to the
monitor and written out.
'container_member' isn't really a well defined concept.
Each metadata might enumerate members differently, so just
let each format /mdX/YYYY as appropriate.
I want the metadata handler to have more control over the 'version',
particularly for arrays which are members of containers.
So discard st->text_version and instead use info->text_version
which getinfo_super can initialise.
mark_dirty is just a special case of mark_clean - with sync_pos == 0.
mark_sync is not required. We don't modify the metadata when sync
finishes. Only when the array becomes non-writeable at which point we
use mark_clean to record how far the resync progressed.
From: Dan Williams <dan.j.williams@intel.com>
Each md_message encapsulates a single command. A command includes an 'action'
member which describes what if any data comes after the action. Communication
with the monitor involves updating the active_cmd pointer and then writing to
mgr_pipe. Pass/fail status is returned via mon_pipe.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
From: Dan Williams <dan.j.williams@intel.com>
Added curr_state as a parameter to set_disk. Handlers look at this to
record components failures, and set global 'degraded' or 'failed'
status.
When reading the state as faulty:
1/ mark the disk failed in the metadata
2/ write '-blocked' to the rdev state to allow the kernel's failure
mechanism to advance
3/ the kernel will take away the drive's role in remove_and_add_spares()
4/ once the disk no longer has a role writing 'remove' to the rdev state
will get the disk out of array.
There is a window after writing '-blocked' where the kernel will return
-EBUSY to remove requests. We rely on the fact that the disk will
continue to show faulty so we lazily wait until the kernel is ready to
remove the disk. If the manager thread needs to get the disk out of the
way it can ping the monitor and wait, just like the replace_array()
case.
[buglet fix: swap the parameters of attr_match in read_dev_state]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
From: Dan Williams <dan.j.williams@intel.com>
1/ Block attempts to add/remove devices from container members
2/ Forward add/remove requests to containers
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
From: Dan Williams <dan.j.williams@intel.com>
Metadata handlers set mdinfo.resync_start depending on the state of the
array. By default mdadm assumes the array is dirty and needs a full
resync.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
From: Dan Williams <dan.j.williams@intel.com>
The following now work:
--examine
--examine --brief
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Create a ddf array by naming the device /dev/ddf* or
specifying metadata 'ddf'.
If ddf is specified with no level, assume a container (indeed,
anything else would be wrong).
**Need to use text_Version to set external metadata...
More ddf support
Load a ddf container. Now
--examine /dev/ddf
works.
super-ddf: fix compile warning
From: Dan Williams <dan.j.williams@intel.com>
super-ddf.c:723: format %lu expects type long unsigned int, but argument 3 has type unsigned int
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The current model for creating arrays involves writing
a superblock to each device in the array.
With containers (as with DDF), that model doesn't work.
Every device in the container may need to be updated
for an array made from just some the devices in a container.
So instead of calling write_init_super for each device,
we call it once for the array and have it iterate over
all the devices in the array.
To help with this, ->add_to_super now passes in an 'fd' and name for
the device. These get saved for use by write_init_super. So
add_to_super takes ownership of the fd, and write_init_super will
close it.
This information is stored in the new 'info' field of supertype.
As part of this, write_init_super now removes any old traces of raid
metadata rather than doing this in common code.
klibc still misses a lot functionality to let mdadm link against,
this small step helps to get to the real trouble.. :)
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Neil Brown <neilb@suse.de>
From: Doug Ledford <dledford@redhat.com>
This one fixes a bug where once manage mode is set, the -a short option
is no longer parsed correctly (true of grow mode as well). This happens
because when you switch the short opts to the bitmap_auto version, it
specifies that the argument must follow a, yet the loop expects to get
an undecorated option and parse it as the disk dev instead of trying to
parse optarg. So, create a new short opt array that is used for manage
and grow that doesn't list a as having an argument.
udev likes to get information about a device as key=value pairs so it
can create disk/by-id links etc. So add --export flag which causes
the output of --detail to easily parsable.
From: Kay Sievers <kay.sievers@novell.com>
Depending on the size of the array we reserve space for up to 128K
of bitmap, and we use it where possible.
When hot-adding to a version 1.0 we can still only use the 3K at the
end though - need a sysfs interface to improve that.
If a small chunksize is requested on Create, we don't auto-enlarge
the reserved space - this still needs to be fixed.
If not 'ftw' is available, still allow openning of devices by dev number.
More recent version of uclibc support nftw, so add support to check
for that.
From: Luca Berra <bluca@vodka.it>
glibc 2.4 is pedantic on ignoring return values from fprintf, fwrite and
write, so now we check the rval and actually do something with it.
in the Grow.c case i only print a warning, since i don't think we can do
anything in case we fail invalidating those superblocks (is should never
happen, but then...)
Signed-off-by: Neil Brown <neilb@suse.de>
glibc says of rand
Do not use this function in applications intended to be
portable when good randomness is needed.
Go figure...
Signed-off-by: Neil Brown <neilb@suse.de>
pass CFLAGS to mdassemble build, enabling -Wall -Werror showed some
issues also fixed by the patch.
From: Luca Berra <bluca@vodka.it>
Signed-off-by: Neil Brown <neilb@suse.de>
This can be used to bootstrape homehost tagging.
If no arrays are found that are tagged, we look for any array
and tag it.
Signed-off-by: Neil Brown <neilb@suse.de>
i.e. if assembling with --name or --super-minor, then if we find two
different arrays with the same apparent identity, and one was built
for 'this' host, then prefer that one instead of giving up in disgust.
Signed-off-by: Neil Brown <neilb@suse.de>
We make sure all devices can are consistent before doing any --update
This saves us from updating some but not all of an array, and then
aborting.
It also means we can backtrack on out decisions, which we might want to
do later.
Signed-off-by: Neil Brown <neilb@suse.de>
When an array is created, if the homehost is know,
the superblock gets it, either in the uuid, (via sha1)
or in the name field.
Signed-off-by: Neil Brown <neilb@suse.de>
So when you say auto=md or auto=part in mdadm.conf, it give a preference
for type of array, but standard name will override.
But --auto=md is more insistant.
FIXME I'm not at all happy about handling of names that already exist.
I don't think that should be removed if the device is active.
Signed-off-by: Neil Brown <neilb@suse.de>
A pending patch to the kernel causes bitmap file updates
to not go through the page cache, so O_DIRECT is needed to
ensure that we read current data.
Signed-off-by: Neil Brown <neilb@suse.de>
To support resizing an array without a spare, mdadm now understands
--backup-file=
which should point to a file for storing a backup of critical data.
This can be given to --grow which will create the file, or
--assemble which will restore from the file if needed.
Signed-off-by: Neil Brown <neilb@suse.de>
- report Intent Bitmap in --detail
- report internal bitmap in --examine
- pass' --force through to --grow --bitmap
- support v.large arrays in --grow --bitmap
Signed-off-by: Neil Brown <neilb@suse.de>
clean up 'long long' usage for size of array, so that
with v-1 superblocks a raid1 larger than 2TB is possible.
Signed-off-by: Neil Brown <neilb@suse.de>
From: ross@jose.lug.udel.edu (Ross Vandegrift)
Hi Neil,
While adding the text message mode, I saw a FIXME asking for syslog
support in monitor mode.
This patch adds exactly that.
Signed-off-by: Neil Brown <neilb@suse.de>
Support "--build"ing arrays with bitmaps.
hot-removal of bitmaps
--re-add of drives recently removed.
assorted extra tests
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Currently this includes
--write-behind to set level of write-behind supported
--write-mostly to flag devices as write-mostly.
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
This includes:
adding --metadata= option to choose metadata format
adding metadata= word to config file.
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>