If the kernel supports it, freeze recovery over multiple adds,
so that they can all be added to the array at the same time and
be recovered in parallel.
Signed-off-by: NeilBrown <neilb@suse.de>
We should use 'info' here, not 'info2'.
info2 refers to some other device (There may not even be one).l
info is *this* disk.
This is particularly important for getting info.disk.state
correct, which the kernel depends on to get 're-add' functionality
correct.
Signed-off-by: NeilBrown <neilb@suse.de>
If a RAID6 array is in a state which doesn't have a
RAID5 equivalent, the code currently dereferences a NULL.
If it does have an equivalent - use that.
If it doesn't but it already in the RAID5-compatible layout
with the Q block last, handle that case,
else require the new layout to be explicitly requested.
Signed-off-by: NeilBrown <neilb@suse.de>
Reporting:
mdadm: added /dev/loop1 to /dev/md0 as 1
mdadm: added /dev/loop2 to /dev/md0 as 2
mdadm: added /dev/loop0 to /dev/md0 as 0
mdadm: /dev/md0 has been started with 2 drives (out of 3).
is confusing - why only 2? Code now reports:
mdadm: added /dev/loop1 to /dev/md0 as 1
mdadm: added /dev/loop2 to /dev/md0 as 2 (possibly out of date)
mdadm: added /dev/loop0 to /dev/md0 as 0
mdadm: /dev/md0 has been started with 2 drives (out of 3).
which is somewhat clearer.
Signed-off-by: NeilBrown <neilb@suse.de>
RAID10 arrays with an odd number of devices had the arraysize
reported wrongly by --examine due to a rounding error.
Reported-by: Chris Francy <zoredache@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This uses a struct to cache the block size for aligned reads/writes,
to avoid repeated ioctl(BLKSSZGET) calls.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Avoid possibly using stale data in bitmap and misc area of superblock.
In addition, remove superfluous memsets already covered by memset of
full superblock.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Use a #define rather than calculate the size of the superblock buffer
on every allocation.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
We just calculated the pointer to the bitmap, so use it instead of
recalculating.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
The current 1024 byte limit on 1.x superblocks limits us to
384 devices. Sometimes people want more.
The kernel is already prepared for superblocks up to 4K,
so enable that in mdadm allowing up to
(4096-256)/2 == 1920
devices (active plus spare).
Signed-off-by: NeilBrown <neilb@suse.de>
Map file may miss an entry if bad flag is not cleared on update.
This happens for example when an old entry exists in map that
has no mdstat counterpart and we create a new array with the same devnum.
Newly created array will not appear in map if update doesnt clear bad flag.
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
If both "legs" of a RAID1 (or equivalent in RAID10) fail, then one
of the becomes available again it maybe appropriate to re-add the
failed device(s).
So remove the restriction that an array must has 'enough' devices
before being re-added, and if there is no-where to read a superblock
from for matching, then assume the kernel will do necessary checks.
Signed-off-by: NeilBrown <neilb@suse.de>
This is a bit of a hack and the code need to be made more
general. But this adds the special case of a RAID0 being
reshaped which looks like a RAID4 but doesn't need as many
devices.
Signed-off-by: NeilBrown <neilb@suse.de>
If we open with O_EXCL before checking that the device is one that
we really want, then that could cause some other process to think
the device is busy when it isn't really.
This particularly affects running "mdadm -A devname" in parallel for
different arrays. One might be looking at a device that it won't
end up using while another trys and fails to look at a device that
it needs.
So delay the O_EXCL until after all identity checks.
Multiple "mdadm -As" will still have races, but that is fundamentally
racy anyway.
Signed-off-by: NeilBrown <neilb@suse.de>
Other parts of mdadm/mdmon place .pid/.sock files in MDMON_DIR. This
makes Monitor.c consistent with the rest.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
In addition remove attempt to print an error message if
write_init_super() fails, as this is handled in the various
write_init_super() functions. This avoids a segfault on error.
Reported by Jim Meyering in
https://bugzilla.redhat.com/show_bug.cgi?id=795461
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
* Incremental.c (Incremental): On sysfs_read failure, don't call
sysfs_free(sra) just before "goto out_unlock", since that very
same "sra" is freed the same way by the clean-up code below.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Reading sysfs entry that is '0' long should cause an error.
Reshape position cannot be empty.
Absence of reshape position should be ignored. It is possible
that we are about raid0 reshape continuation and it is before takeover.
This means that according metadata (changed by mdmon) it should be reshaped
but md knows nothing about it at this moment. Reshape continuation
in reshape_array() will change it to raid4 and reshape position appears
in sysfs.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This makes super[01].c properly align buffers used for the bitmap
using posix_memalign() to make sure the writes don't fail in case the
bitmap is opened using O_DIRECT.
This is based on https://bugzilla.redhat.com/show_bug.cgi?id=789898
and an initial patch by Alexander Murashkin.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
mapfile:RebuildMap calls conf_match with no devname, so we must be
careful not to use it.
Reported-by: Arkadiusz Miśkiewicz <arekm@maven.pl>
Signed-off-by: NeilBrown <neilb@suse.de>
When one of arrays is inactive, do not try to continue reshape
on this array. Just skip it.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When reshape is restarted from '0', very begin of array
it is possible that for external metadata reshape and array
configuration doesn't happen.
Check if md has the same opinion, and reshape is restarted
from 0. If so, this is regular reshape start after reshape
switch in metadata to next array only.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When OLCE is in progress, checkpoint steps are getting bigger due to added space during process.
When mdadm fails after saving "max" to sync_max, mdmon will monitor process
and switch reshape to next array. At this moment we have got information
inconsistency between metadata and migration record.
To avoid this, clear migration record by mdmon /exception from the rule
that migration record is maintained by mdadm/ when reshape switches
to next array.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When reshape is broken it can occur that metadata is not saved properly.
This can cause that reshape process is farther in md than metadata states.
On restart save checkpoint to store current position /probably farther/
that can be read from md.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When reshape is broken, it can occur that metadata is not saved properly.
This can cause that reshape process is farther in md than metadata states.
On reshape restart use md position as start position, if it is farther than
position specified in metadata. Opposite situation treat as error.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When chunk size migration occurs (e.g. 128k->4k) first checkpoint cannot
be set in md due to too small step. Correct migration record initialization
to allow whole copy area usage and increase migration checkpoint step.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Using takeover operation for grow purposes, mdadm has to be sure
that mdmon processes all updates, and if necessary it will be closed
at takeover to raid0 operation. If mdmon is late, next array in container
is processed and due to race condition mdmon closes itself instead to monitor
next reshape operation.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Problem was found during reshaping 2 volumes /raid0 and raid5/ in container.
Sometimes mdmon throws core dump due to NULL pointer exception.
Problem occurs in scenario:
- managemon: is about spare activation (degraded raid4 volume == raid0 under takeover)
- managemon: detect level change and signals monitor (manage_member() calls replace_array())
- monitor: detects transition raid4/5->raid0 and sets a->container to NULL
to indicate array deactivation
- managemon : continues his work and tries to activate spare (a->check_degraded is set).
NULL pointer is passed to metadata handler activate_spare()
Core dump is generated.
To resolve this situation managemon (after monitor kick) checks again
a->container pointer to learn if current array is not to be deactivated.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When added disk is disk added by expansion and this is last disk added
to array, assemble_container_content() will not even try to run such array.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When during incremental assembly general migration is in progress,
starting degraded array causes that no more disks (even present)
can be added later as array is already started.
Request all previously present disks during general migration for assembly.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When result from strchr() is NULL and it is assigned to subarray,
NULL pointer can be passed to strdup() function and coredump file
is generated.
Subarray is checked for NULL pointer, so it is assumed that it can
be NULL at this moment.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
If we have to --force assembly during reshape, we need to
check by the 'before' and 'after' cases to make sure there
are enough devices.
Reported-by: Richard Herd <2001oddity@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
It can easily be calculated from 'avail' and 'raid_disks', and we
will soon have a case where we don't have it easily available to pass
in.
Signed-off-by: NeilBrown <neilb@suse.de>
A recently change to write_bitmap1 meant awrite would sometimes
write from a non-aligned buffer which of course break.
So change awrite (and aread) to always use their own aligned
buffer to ensure safety.
Reported-by: Alexander Lyakas <alex.bolshoy@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
when deciding whether the array is clean or dirty, compare
sb->resync_offset against MaxSector and not against sb->size
With RAID6 resyncing and subsequent drive failures, it is possible to
reach the case, in which sb->resync_offset==sb->size. This happens
when resync is aborted due to drive failures, and immediately a
rebuild of a spare starts. In this case, mdadm was considered the
array as clean, while kernel was considering the array as dirty. It is
better for mdadm also to consider the array as dirty in this case.
Signed-off-by: NeilBrown <neilb@suse.de>
Fix the case with creating an array with given container in command line
instead of real devices:
mdadm -CR /dev/md/raid0 -l 0 -n 2 -z5G /dev/md/imsm
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When --offroot is specified, mdadm will change the first character of
argv[0] to '@'. This is used to signal to systemd that mdadm was
launched from initramfs and should not be shut down before returning
to the initramfs.
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
NeilBrown
Jes Sorensen
Czarnowska, Anna
Jim Meyering
Adam Kwolek
Alexander Lyakas
Labun, Marcin