When we can for devices using GET_DISK_INFO we currently
limit to 1024. But some arrays can have more than this.
So raise it to 4096 and make the constant a #define.
Signed-off-by: NeilBrown <neilb@suse.de>
When mdadm is compiled using e.g. 'everything' option, mdassemble
compilation is broken.
Change code to enable mdassemble compilation.
Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When arrays using external metadata are assembled, and one of array
in container is under reshape, second array will remain in read only
state (not auto read only). It is caused by array fact that array
is frozen and mdmon doesn't has opportunity to switch array in r/w mode.
Freezing not reshaped array just after it is being assembled allows mdmon
to enable it for writing.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Size change is possible as standalone change only. To make sure size change
is not requested pass '-1' as size parameter.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Put currently existing code for alignment correction in to function
imsm_component_size_aligment_check() and use it for align component size
to chunk size during volume size expansion operation.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Add support for setting max size for size change operation using
imsm_get_free_size() function for computing maximum available space.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Add function imsm_imsm_get_free_size() using part of code from function
reserve_space().
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Some setting size error cases were not detected.
When error occurs, stop setting new size action and rollback metadata
changes.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When reshape_super() updates metadata with new size, due to some metadata
limitations saved value can be different than requested value by user.
Update size (read it from metadata) for setting it in md.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
For raid0, takeover operation is required for size change.
Add takeover to degraded raid4 before size change and back to raid0 after.
Array information has to be read again from md after takeover.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Add metadata rollback specific code for imsm.
Let reshape_super() ability to differentiate metadata apply and rollback
actions.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Function reshape_super() guards metadata changes.
It is used to apply changes rollback in error case also.
As change (apply and rollback) can be not bi-directional reshape_super()
has to know if current action is metadata change that should be guarded
using metadata restrictions, or this is metadata rollback change
executed due to error occurrence.
In second case change has to be unconditional.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
For external metatdata ioctl doesn't set new size. Set new size using sysfs.
Put code for size change in to function to re-use the same code as during
On-line Capacity Expansion
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Add new meatdata update type imsm_update_size_change, and update metadata
for volume size expansion operation.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Patch adds ability to function imsm_analyze_change() for:
1. Detect size change request for volume operation.
2. Check and correct size for change.
3. Set new change kind to CH_ARRAY_SIZE
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Function imsm_num_data_members() returns wrong value for raid 1 and 10.
It returns all data member but it should return number of unique data
members (excluding mirror devices)
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Display maximum volumes per array and per controller
in --detail-platform command.
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
manpage for mdadm(8) contains typo - missing "d" at the end of "describe" word.
Signed-off-by: Roman Ovchinnikov <coolthecold@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
The kernel is growing the ability to avoid the need for a
backup file during reshape by being able to change the data offset.
For this to be useful we need plenty of free space before the
data so the data offset can be reduced.
So for v1.1 and v1.2 metadata make the default data_offset much
larger. Aim for 128Meg, but keep a power of 2 and don't use more
than 0.1% of each device.
Don't change v1.0 as that is used when the data_offset is required to
be zero.
Signed-off-by: NeilBrown <neilb@suse.de>
As the bitmap can be before the superblock, bitmap_offset is signed.
But some of the code didn't honour that :-(
Signed-off-by: NeilBrown <neilb@suse.de>
It isn't sufficient to use '0' for 'error' as well will
later have fields that can validly be '0'.
So return "-1" on error.
Also fix parsing of --bitmap_check so that '0' is treated
as an error: we don't support 512B anyway.
Signed-off-by: NeilBrown <neilb@suse.de>
This patch ensures metadata attribute is set correctly also for spares.
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Creation of a container using disks over 2TB should be allowed only when orom supports large disks
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When orom does not support volumes over 2TB the creation should be disallowed
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
no point calling info_to_blocks_per_member when it just returns size*2 for level==1
calc_array_size can be used for all levels
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Functions retrieving sizes from metadata do not need to check
2TB attribute only when we can guarantee the hi bits are always
clear when the MPB_ATTR_2TB_DISK attribute is not set.
Therefore the following fields are cleared on metadata load
when not in use according to attribute:
struct imsm_disk.total_blocks_hi
struct imsm_map.pba_of_lba0_hi
struct imsm_map.blocks_per_member_hi
struct imsm_map.num_data_stripes_hi
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Calculating array_blocks using info->size causes error on activation of
volume using disks over 1 TB. unsigned long long size parameter
is used instead.
total_blocks, pba_of_lba0, blocks_per_member and num_data_stripes overflow
when using disks over 2TB.
Part of fillers in metadata is used to contain hi bits of the numbers
that are likely to go over 32 bit limit.
Functions are added to get and set such fields as the hi bits are not
adjacent with low bits in the structures.
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
If the array is already frozen when Manage_subdevs is called we don't
want it to unfreeze the array.
This is because Grow calls Manage_subdevs to add devices to an array
being reshaped, and the array must stay frozen over this call.
So if sysfs_freeze_array find the array to be frozen it returns '0',
meaning that it didn't and cannot freeze it. Then the caller will not
try to unfreeze, which is good.
Signed-off-by: NeilBrown <neilb@suse.de>
RAID1 can only be converted to RAID0 or RAID5 if the size is
a multiple of 4K as we cannot have chunks smaller than 4K.
If this might happen, report a useful error message.
Signed-off-by: NeilBrown <neilb@suse.de>
RAID1 arrays don't have a chunk size, but if you ever convert
one to RAID5 you will need at least a small one >= 4K.
So round of size to a multiple of 64K.
This only affect Create, not "--grow --size=max". The latter
is too hard and with smaller returns.
Signed-off-by: NeilBrown <neilb@suse.de>
If the kernel supports it, freeze recovery over multiple adds,
so that they can all be added to the array at the same time and
be recovered in parallel.
Signed-off-by: NeilBrown <neilb@suse.de>
We should use 'info' here, not 'info2'.
info2 refers to some other device (There may not even be one).l
info is *this* disk.
This is particularly important for getting info.disk.state
correct, which the kernel depends on to get 're-add' functionality
correct.
Signed-off-by: NeilBrown <neilb@suse.de>
If a RAID6 array is in a state which doesn't have a
RAID5 equivalent, the code currently dereferences a NULL.
If it does have an equivalent - use that.
If it doesn't but it already in the RAID5-compatible layout
with the Q block last, handle that case,
else require the new layout to be explicitly requested.
Signed-off-by: NeilBrown <neilb@suse.de>
Reporting:
mdadm: added /dev/loop1 to /dev/md0 as 1
mdadm: added /dev/loop2 to /dev/md0 as 2
mdadm: added /dev/loop0 to /dev/md0 as 0
mdadm: /dev/md0 has been started with 2 drives (out of 3).
is confusing - why only 2? Code now reports:
mdadm: added /dev/loop1 to /dev/md0 as 1
mdadm: added /dev/loop2 to /dev/md0 as 2 (possibly out of date)
mdadm: added /dev/loop0 to /dev/md0 as 0
mdadm: /dev/md0 has been started with 2 drives (out of 3).
which is somewhat clearer.
Signed-off-by: NeilBrown <neilb@suse.de>
RAID10 arrays with an odd number of devices had the arraysize
reported wrongly by --examine due to a rounding error.
Reported-by: Chris Francy <zoredache@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This uses a struct to cache the block size for aligned reads/writes,
to avoid repeated ioctl(BLKSSZGET) calls.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Avoid possibly using stale data in bitmap and misc area of superblock.
In addition, remove superfluous memsets already covered by memset of
full superblock.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
NeilBrown
Lukasz Dorau
Adam Kwolek
Labun, Marcin
CoolCold
Czarnowska, Anna
Jes Sorensen