When building container members with -IR, we need to ensure that
devices added to an active array preserve the 'in_sync' status so they
don't needlessly get rebuilt.
So allow sysfs_add_disk to do this (only works in kernels since
2.6.30) and pass the relevant flag down.
Signed-off-by: NeilBrown <neilb@suse.de>
Starting with 2.6.30 the md/resync_start attribute will no longer return
a non-sensical number when resync is complete, instead it now returns
'none'.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
For short reshapes the kernel may be done before mdadm can check that
progress has passed the critical section.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When rebuilding the map file tolerate missing/offline disks, otherwise
we will segfault on the NULL return from sysfs_read.
Reported-by: Jacek Danecki <jacek.danecki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
imsm arrays round down the effective array size to the closest 1
megabyte boundary so teach get_info_super_imsm and sysfs_set_array to
set 'md/array_size' if available (and make sure ddf uses the default
size).
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
New documentation shows that this field is not equivalent to
md/resync_start. Disable updates until full support can be developed.
Writing '0' when a migration starts/re-starts remains correct.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Until support for higher order migrations (online capacity expansion,
raid level migration, chunk size migration...) are implemented do not
allow arrays in these states to be assembled.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
imsm distinguishes parity initialization from parity checking in the
metadata. Older option roms marked the repair operation with the
'verify' type and a 'with fixup' flag in the raid device 'status' field.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
'num_domains' is the number of parity domains. I.e. 2 in the raid10
case (2-mirrors), while raid0 through raid5 have 1 parity domain (even
though raid0 does not have parity).
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
According to new documentation the metadata expects that all whitespace
(characters <= 0x20) are stripped from the incoming serial number. If
the length remains longer than MAX_RAID_SERIAL_LEN then only the
right-most characters are preserved.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
I'm not attaching a patch for this because it's so simple. Long story
short, watching both add and change events in udev rules is bad for md
devices. Specifically, the kernel will generate a change event on
things like array stop, and on things like fdisk close. In the case
of array stop, it can result in the array being assembled again
immediately. In the case of fdisk close, the situation is worse.
Let's say you stop all the md devices on some block device in order to
repartition. You run fdisk, change the partition table, then issue a
write of the table. The write of the table triggers the change event
*before* the kernel updates the partition table in memory for the
block device, causing udev to rerun the incremental rules on the old
partition table and restart all the arrays you just stopped with the
old partition table layout, at which point the kernel is unable to
reread the partition table. So, once you've enable incremental
assembly, it becomes apparent that what we really want is to only
start devices on add, not on add|change.
--
Doug Ledford <dledford@redhat.com>
Simple patch to silence some compile warnings that only show up on
64bit arches.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
The 'work_disks' number should be the number that is expected, not the
number found so far. This is needed for Incremental assembly to
start the array at the right time.
Signed-off-by: NeilBrown <neilb@suse.de>
The variable 'i' was being used as a loop variable, and also
for something else inside the loop. So make the larger loop have a
more meaningful name.
Signed-off-by: NeilBrown <neilb@suse.de>
wait not only for the name to appear, but for it to refer to the
correct device.
Sometimes old symlinks left lying around can be confusing.
Signed-off-by: NeilBrown <neilb@suse.de>
When reporting "--detail --scan", use names like /dev/md/foo where
available rather than /dev/md/127
This is particularly needed for containers where the member arrays
will report "container=/dev/md/foo" and we want the container to have
the same name.
Signed-off-by: NeilBrown <neilb@suse.de>
There are probably other places where rounding size to
chunksize is needed, or useful, but this is a good start.
Signed-off-by: NeilBrown <neilb@suse.de>
In some cases we should only print an error message if
'devname' is defined. In fact we were only returning
the error at all in that case!!
Signed-off-by: NeilBrown <neilb@suse.de>
If an array reshape completed within 1 second, then --grow will not
notice that it has finished and will keep waiting for the critical
section to pass.
So be more cautious in the test.
Signed-off-by: NeilBrown <neilb@suse.de>
If mdmon sees a device added to a container, it should assume it is
a new spare. It could be a part of the array that just hadn't been
assembled yet. So check first.
Signed-off-by: NeilBrown <neilb@suse.de>
If we haven't got hold of all the devices yet, we need to be
ready to skip over some while gathering content information.
Signed-off-by: NeilBrown <neilb@suse.de>
If we are assembling an array in a container and it isn't complete
enough to start yet, then
- don't start mdmon
- don't say the array is started
- don't wait for the device to appear in /dev
Signed-off-by: NeilBrown <neilb@suse.de>
If we need to add digits to a name to make it unique, but don't have
to add '_', we need to avoid adding a digit immediately after a digit.
So if the last character of the name is a digit, add the '_' anyway.
Signed-off-by: NeilBrown <neilb@suse.de>
1/ if homehost matches, then we need to set trustworthy to 'LOCAL'
2/ if we decide to set trustworthy to 'METADATA' because we have to
use the metadata version name, do that *after* we have checked if
we are going to assemble within a container, as inside the
container there could be different sources of names to use.
Signed-off-by: NeilBrown <neilb@suse.de>