Newer kernels don't allow for specifying an array larger than 511. This
makes it so find_free_devnm wraps to 511 instead of 2^20 - 1.
Signed-off-by: Mike Lovell <mlovell@bluehost.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Commit 4dd2df0966 added a trip through makedev(), major(), and minor() for
device major and minor numbers. This would cause mdadm to fail in operating
on a device with a minor number bigger than (2^19)-1 due to it changing
from dev_t to a signed int and back.
Where this was found as a problem was when a array was created with a device
specified as a name like /dev/md/raidname and there were already 128 arrays
on the system. In this case, mdadm would chose 1048575 ((2^20)-1) for the
array and minor number. This would cause the major and minor number to become
negative when generated from devnm2devid() and passed to major() and minor()
in open_dev_excl(). open_dev_excl() would then call dev_open() which would
detect the negative minor number and call open() on the *char containing the
major:minor pair which isn't a valid file.
Signed-off-by: Mike Lovell <mlovell@bluehost.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
The sync_completed after restarting a reshape
(for example - after reboot) is set to "delayed" until
mdmon changes the state. Mdadm does not wait for that change with
old kernels. If this condition occurs - it exits and reshape
is not continuing. This patch adds retry of reading sync_complete
with a delay. It gives time for mdmon to change the "delayed" state.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
There are some cases which didn't need to check the space
is enough or not for NodeNumUpdate option.
1. for array which does not have clustered bitmap.
2. "--nodes" parameter is 0 (eg, add a disk to clustered raid).
3. if "--nodes" parameter is set to a smaller num than
current bms->nodes.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
add_internal_bitmap() returned 1 on success and 0 on error which is
inconsistent. This changes it to return 0 on success and use more
reasonable error codes on error.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
We missed to check the version is BITMAP_MAJOR_CLUSTERED
or not, otherwise mdadm can't create array with other 1.x
metadatas (1.0 and 1.1).
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
We at least need two nodes for cluster raid so make the
check before update node nums.
Reported-by: Zhilong Liu <zlliu@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
It doesn't make sense to create a clustered raid
with only 1 node.
Reported-by: Zhilong Liu <zlliu@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
load_super1() did not clear memory allocated for the superblock +
bitmap. This causes issues if the superblock does not contain a bitmap
as later checks of bitmap features would rely on the bits being
cleared.
This bug has been around for a long time, but was only exposed in
mdadm-3.4 with the introduction of the clustering code.
Reported-by: Jan Stodola <jstodola@redhat.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Added the optional K suffix for completeness, as it
is allowed by util.c's parse_size(char*).
Signed-off-by: Marko Hauptvogel <marko.hauptvogel@googlemail.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
These are similar to stat2devnm() and fd2devnm() but not limited to md
devices. If the device is a partition they will return its kernel name,
not the whole device's name. For more information see commit:
8d83493 ("Introduce devid2kname - slightly different to devid2devnm.")
Also remove unsued declaration for fmt_devname().
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
mdadm:add '--nodes' option in GROW mode, because
'Cluster nodes' is set 4 by default if the nodes
parameter is not specified when switch bitmap
from none to clustered.
Signed-off-by: Zhilong Liu <zlliu@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Actually, we need to use NodeNumUpdate here to
ensure there are enough spaces for those nodes.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
assemble_container_content() doesn't need a dummy NULL pointer
variable for calling map_update. Passing NULL directly is sufficient.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
dev_st is only ever assigned if array->not_persistent == 0, so move
the second use of it into the same scope where the assignment is
made.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Be more consistent in the formatting of conditionals. Don't split on
multiple lines if not needed, don't overflow the 80 character line
length, put the condition operator at the end of the line of
multi-line conditionals, etc.
This should be purely cosmetic.... famous last words!
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
If sra == NULL we cannot goto abort, as it would result in calls to
sysfs_set_num() which would dereference sra.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
sysfs_read() allocates and populates a struct mdinfo, however the code
forgot to free it again, before dropping the reference to the pointer.
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
If failure happened when add disk to array
by grow mode, need to goto release instead
of continue the reshape.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Notify "Can only convert a 2-device array to RAID5" instead of
"Impossibly level change request for RAID1" when convert from
RAID1 to RAID5 if the disk num is not equal two like RAID4/5->RAID1
did.
Signed-off-by: Yi Zhang <yizhan@redhat.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This patch simplifies for() loop used in
ahci_enumerate_ports(). It makes it more readable.
Similar thing was done in b913501
({platform,super}-intel: Fix two resource leaks).
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This patch reverts a0abe1e
(super-intel: Make print_found_intel_controllers() return void)
and make this function "return int" again.
Also, interpreting the return value is added.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
If this file descriptor is not closed here, it remains open during
reshape process and stopping process will end up with
"cannot get exclusive access to container".
Once this file descriptor is no longer needed - it can be closed.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Commit d180d2aa2a ("Manage: fix test for 'is array failed'.")
introduced a regression which would not allow to re-add new
drivers to a failed array.
Fixes: d180d2aa2a ("Manage: fix test for 'is array failed'.")
Signed-off-by: Hannes Reinecke <hare@suse.de>
Cc: Coly Li <colyli@suse.de>
Cc: Neil Brown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
The 'size' field of mdu_disk_info_t is 32bit and should not be used
except for legacy ioctls. super-ddf got this wrong :-(
This change makes it possible to create ddf arrays which used more than
2TB of each device.
Reported-by: Dan Russell <dpr@aol.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
The return value from print_found_intel_controllers() is never used,
so lets make it return void.
Reported-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
cmap_get_string() used to retrieve cluster_name does not restrict it's
size. To prevent buffer overflows use the size of the destination
buffer, not strlen() of the source, and null terminate the copied
string.
Fixes: 0aa2f15b ("mdadm: add the ability to change cluster name)"
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
The code did not free 'dir' allocated by opendir(). An additional
benefit is that this simplifies the for() loops.
Fixes: 60f0f54d ("IMSM: Add support for VMD")
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Grow_addbitmap() is only ever called with s->bitmap_file != NULL, but
not all static code checkers catch this. This adds a check to quiet
down the false positive warnings.
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
All cases where fd2 is used are completed with a close(fd2), so there
is no need to set fd2 = -1 or check for it before exiting.
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This adds a buffer size argument to load_sys(), rather than relying on
a hard coded buffer size. The old behavior was safe because we knew
the kernel would never return strings overrunning the buffers, however
it was ugly, and would cause code checking tools to spit out warnings.
This caused a Coverity warning over the read into
sra->sysfs_array_state which is only 20 bytes.
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
sysfs_read() may return NULL, so we should check the validity of the
pointer before dereferencing it.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Since flags is only set as LKF_NOQUEUE, the code
with LKF_CONVERT flag should be delete.
Reported-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
For cluster raid, we need to displays bitmap related
contents from different bitmaps which are based on node
num. So bitmap_file_open and locate_bitmap are changed a
little bit for the purpose.
Reported-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Fixes: b98043a2f8 ("Show all bitmaps while examining bitmap")
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
A recent commit removed a call to abort_reshape() when IMSM reshape
completed. An unanticipated result of this is that the suspended
region is not cleared as it should be.
So after a reshape, a region of the array will cause all IO to block.
Re-instate the required updates to suspend_{lo,hi} coped from
abort_reshape().
This is caught (sometimes) by the test suite.
Also fix a couple of typos found while exploring the code.
Reported-by: Ken Moffat <zarniwhoop@ntlworld.com>
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Fixes: 2139b03c20 ("imsm: don't call abort_reshape() in imsm_manage_reshape()")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Jes Sorensen
Mike Lovell
Pawel Baldysiak
Guoqing Jiang
Marko Hauptvogel
Artur Paszkiewicz
zhilong
Yi Zhang
Hannes Reinecke
NeilBrown