mm_gdbus_sms_get_state ()

guint
mm_gdbus_sms_get_state (MmGdbusSms *object);

Gets the value of the "State" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_sms_get_pdu_type ()

guint
mm_gdbus_sms_get_pdu_type (MmGdbusSms *object);

Gets the value of the "PduType" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_sms_get_message_reference ()

guint
mm_gdbus_sms_get_message_reference (MmGdbusSms *object);

Gets the value of the "MessageReference" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_sms_get_storage ()

guint
mm_gdbus_sms_get_storage (MmGdbusSms *object);

Gets the value of the "Storage" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_sms_get_text ()

const gchar *
mm_gdbus_sms_get_text (MmGdbusSms *object);

Gets the value of the "Text" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_sms_dup_text() if on another thread.

[skip]

mm_gdbus_sms_dup_text ()

gchar *
mm_gdbus_sms_dup_text (MmGdbusSms *object);

Gets a copy of the "Text" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_sms_get_data ()

GVariant *
mm_gdbus_sms_get_data (MmGdbusSms *object);

Gets the value of the "Data" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_sms_dup_data() if on another thread.

[skip]

mm_gdbus_sms_dup_data ()

GVariant *
mm_gdbus_sms_dup_data (MmGdbusSms *object);

Gets a copy of the "Data" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_sms_get_number ()

const gchar *
mm_gdbus_sms_get_number (MmGdbusSms *object);

Gets the value of the "Number" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_sms_dup_number() if on another thread.

[skip]

mm_gdbus_sms_dup_number ()

gchar *
mm_gdbus_sms_dup_number (MmGdbusSms *object);

Gets a copy of the "Number" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_sms_get_smsc ()

const gchar *
mm_gdbus_sms_get_smsc (MmGdbusSms *object);

Gets the value of the "SMSC" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_sms_dup_smsc() if on another thread.

[skip]

mm_gdbus_sms_dup_smsc ()

gchar *
mm_gdbus_sms_dup_smsc (MmGdbusSms *object);

Gets a copy of the "SMSC" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_sms_get_validity ()

GVariant *
mm_gdbus_sms_get_validity (MmGdbusSms *object);

Gets the value of the "Validity" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_sms_dup_validity() if on another thread.

[skip]

mm_gdbus_sms_dup_validity ()

GVariant *
mm_gdbus_sms_dup_validity (MmGdbusSms *object);

Gets a copy of the "Validity" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_sms_get_class ()

gint
mm_gdbus_sms_get_class (MmGdbusSms *object);

Gets the value of the "Class" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_sms_get_teleservice_id ()

guint
mm_gdbus_sms_get_teleservice_id (MmGdbusSms *object);

Gets the value of the "TeleserviceId" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_sms_get_service_category ()

guint
mm_gdbus_sms_get_service_category (MmGdbusSms *object);

Gets the value of the "ServiceCategory" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_sms_get_timestamp ()

const gchar *
mm_gdbus_sms_get_timestamp (MmGdbusSms *object);

Gets the value of the "Timestamp" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_sms_dup_timestamp() if on another thread.

[skip]

mm_gdbus_sms_dup_timestamp ()

gchar *
mm_gdbus_sms_dup_timestamp (MmGdbusSms *object);

Gets a copy of the "Timestamp" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_sms_get_discharge_timestamp ()

const gchar *
mm_gdbus_sms_get_discharge_timestamp (MmGdbusSms *object);

Gets the value of the "DischargeTimestamp" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_sms_dup_discharge_timestamp() if on another thread.

[skip]

mm_gdbus_sms_dup_discharge_timestamp ()

gchar *
mm_gdbus_sms_dup_discharge_timestamp (MmGdbusSms *object);

Gets a copy of the "DischargeTimestamp" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_sms_get_delivery_report_request ()

gboolean
mm_gdbus_sms_get_delivery_report_request
                               (MmGdbusSms *object);

Gets the value of the "DeliveryReportRequest" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_sms_get_delivery_state ()

guint
mm_gdbus_sms_get_delivery_state (MmGdbusSms *object);

Gets the value of the "DeliveryState" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_sms_call_send ()

void
mm_gdbus_sms_call_send (MmGdbusSms *proxy,
                        GCancellable *cancellable,
                        GAsyncReadyCallback callback,
                        gpointer user_data);

Asynchronously invokes the Send() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_sms_call_send_finish() to get the result of the operation.

See mm_gdbus_sms_call_send_sync() for the synchronous, blocking version of this method.

mm_gdbus_sms_call_send_finish ()

gboolean
mm_gdbus_sms_call_send_finish (MmGdbusSms *proxy,
                               GAsyncResult *res,
                               GError **error);

Finishes an operation started with mm_gdbus_sms_call_send().

mm_gdbus_sms_call_send_sync ()

gboolean
mm_gdbus_sms_call_send_sync (MmGdbusSms *proxy,
                             GCancellable *cancellable,
                             GError **error);

Synchronously invokes the Send() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_sms_call_send() for the asynchronous version of this method.

mm_gdbus_sms_call_store ()

void
mm_gdbus_sms_call_store (MmGdbusSms *proxy,
                         guint arg_storage,
                         GCancellable *cancellable,
                         GAsyncReadyCallback callback,
                         gpointer user_data);

Asynchronously invokes the Store() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_sms_call_store_finish() to get the result of the operation.

See mm_gdbus_sms_call_store_sync() for the synchronous, blocking version of this method.

mm_gdbus_sms_call_store_finish ()

gboolean
mm_gdbus_sms_call_store_finish (MmGdbusSms *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_sms_call_store().

mm_gdbus_sms_call_store_sync ()

gboolean
mm_gdbus_sms_call_store_sync (MmGdbusSms *proxy,
                              guint arg_storage,
                              GCancellable *cancellable,
                              GError **error);

Synchronously invokes the Store() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_sms_call_store() for the asynchronous version of this method.

MmGdbusSms

typedef struct _MmGdbusSms MmGdbusSms;

Abstract interface type for the D-Bus interface org.freedesktop.ModemManager1.Sms.

struct MmGdbusSmsIface

struct MmGdbusSmsIface {
  GTypeInterface parent_iface;

  gboolean (*handle_send) (
    MmGdbusSms *object,
    GDBusMethodInvocation *invocation);

  gboolean (*handle_store) (
    MmGdbusSms *object,
    GDBusMethodInvocation *invocation,
    guint arg_storage);

  gint  (*get_class) (MmGdbusSms *object);

  GVariant * (*get_data) (MmGdbusSms *object);

  gboolean  (*get_delivery_report_request) (MmGdbusSms *object);

  guint  (*get_delivery_state) (MmGdbusSms *object);

  const gchar * (*get_discharge_timestamp) (MmGdbusSms *object);

  guint  (*get_message_reference) (MmGdbusSms *object);

  const gchar * (*get_number) (MmGdbusSms *object);

  guint  (*get_pdu_type) (MmGdbusSms *object);

  guint  (*get_service_category) (MmGdbusSms *object);

  const gchar * (*get_smsc) (MmGdbusSms *object);

  guint  (*get_state) (MmGdbusSms *object);

  guint  (*get_storage) (MmGdbusSms *object);

  guint  (*get_teleservice_id) (MmGdbusSms *object);

  const gchar * (*get_text) (MmGdbusSms *object);

  const gchar * (*get_timestamp) (MmGdbusSms *object);

  GVariant * (*get_validity) (MmGdbusSms *object);
};

Virtual table for the D-Bus interface org.freedesktop.ModemManager1.Sms.

The “class” property

  “class”                    int

Represents the D-Bus property "Class".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusSms

Flags: Read / Write

Default value: 0

The “data” property

  “data”                     GVariant *

Represents the D-Bus property "Data".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusSms

Flags: Read / Write

Allowed values: GVariant<ay>

Default value: NULL

The “delivery-report-request” property

  “delivery-report-request”  gboolean

Represents the D-Bus property "DeliveryReportRequest".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusSms

Flags: Read / Write

Default value: FALSE

The “delivery-state” property

  “delivery-state”           guint

Represents the D-Bus property "DeliveryState".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusSms

Flags: Read / Write

Default value: 0

The “discharge-timestamp” property

  “discharge-timestamp”      char *

Represents the D-Bus property "DischargeTimestamp".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusSms

Flags: Read / Write

Default value: NULL

The “message-reference” property

  “message-reference”        guint

Represents the D-Bus property "MessageReference".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusSms

Flags: Read / Write

Default value: 0

The “number” property

  “number”                   char *

Represents the D-Bus property "Number".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusSms

Flags: Read / Write

Default value: NULL

The “pdu-type” property

  “pdu-type”                 guint

Represents the D-Bus property "PduType".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusSms

Flags: Read / Write

Default value: 0

The “service-category” property

  “service-category”         guint

Represents the D-Bus property "ServiceCategory".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusSms

Flags: Read / Write

Default value: 0

The “smsc” property

  “smsc”                     char *

Represents the D-Bus property "SMSC".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusSms

Flags: Read / Write

Default value: NULL

The “state” property

  “state”                    guint

Represents the D-Bus property "State".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusSms

Flags: Read / Write

Default value: 0

The “storage” property

  “storage”                  guint

Represents the D-Bus property "Storage".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusSms

Flags: Read / Write

Default value: 0

The “teleservice-id” property

  “teleservice-id”           guint

Represents the D-Bus property "TeleserviceId".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusSms

Flags: Read / Write

Default value: 0

The “text” property

  “text”                     char *

Represents the D-Bus property "Text".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusSms

Flags: Read / Write

Default value: NULL

The “timestamp” property

  “timestamp”                char *

Represents the D-Bus property "Timestamp".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusSms

Flags: Read / Write

Default value: NULL

The “validity” property

  “validity”                 GVariant *

Represents the D-Bus property "Validity".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusSms

Flags: Read / Write

Allowed values: GVariant<(uv)>

Default value: NULL

The “handle-send” signal

gboolean
user_function (MmGdbusSms            *object,
               GDBusMethodInvocation *invocation,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Send() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_sms_complete_send() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-store” signal

gboolean
user_function (MmGdbusSms            *object,
               GDBusMethodInvocation *invocation,
               guint                  arg_storage,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Store() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_sms_complete_store() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last