mm_gdbus_call_get_direction ()

gint
mm_gdbus_call_get_direction (MmGdbusCall *object);

Gets the value of the "Direction" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_call_get_number ()

const gchar *
mm_gdbus_call_get_number (MmGdbusCall *object);

Gets the value of the "Number" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_call_dup_number() if on another thread.

[skip]

mm_gdbus_call_dup_number ()

gchar *
mm_gdbus_call_dup_number (MmGdbusCall *object);

Gets a copy of the "Number" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_call_get_state ()

gint
mm_gdbus_call_get_state (MmGdbusCall *object);

Gets the value of the "State" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_call_get_state_reason ()

gint
mm_gdbus_call_get_state_reason (MmGdbusCall *object);

Gets the value of the "StateReason" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_call_dup_audio_format ()

GVariant *
mm_gdbus_call_dup_audio_format (MmGdbusCall *object);

Gets a copy of the "AudioFormat" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_call_dup_audio_port ()

gchar *
mm_gdbus_call_dup_audio_port (MmGdbusCall *object);

Gets a copy of the "AudioPort" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_call_get_audio_format ()

GVariant *
mm_gdbus_call_get_audio_format (MmGdbusCall *object);

Gets the value of the "AudioFormat" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_call_dup_audio_format() if on another thread.

[skip]

mm_gdbus_call_get_audio_port ()

const gchar *
mm_gdbus_call_get_audio_port (MmGdbusCall *object);

Gets the value of the "AudioPort" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_call_dup_audio_port() if on another thread.

[skip]

mm_gdbus_call_get_multiparty ()

gboolean
mm_gdbus_call_get_multiparty (MmGdbusCall *object);

Gets the value of the "Multiparty" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_call_call_accept ()

void
mm_gdbus_call_call_accept (MmGdbusCall *proxy,
                           GCancellable *cancellable,
                           GAsyncReadyCallback callback,
                           gpointer user_data);

Asynchronously invokes the Accept() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_call_call_accept_finish() to get the result of the operation.

See mm_gdbus_call_call_accept_sync() for the synchronous, blocking version of this method.

mm_gdbus_call_call_accept_finish ()

gboolean
mm_gdbus_call_call_accept_finish (MmGdbusCall *proxy,
                                  GAsyncResult *res,
                                  GError **error);

Finishes an operation started with mm_gdbus_call_call_accept().

mm_gdbus_call_call_accept_sync ()

gboolean
mm_gdbus_call_call_accept_sync (MmGdbusCall *proxy,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the Accept() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_call_call_accept() for the asynchronous version of this method.

mm_gdbus_call_call_start ()

void
mm_gdbus_call_call_start (MmGdbusCall *proxy,
                          GCancellable *cancellable,
                          GAsyncReadyCallback callback,
                          gpointer user_data);

Asynchronously invokes the Start() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_call_call_start_finish() to get the result of the operation.

See mm_gdbus_call_call_start_sync() for the synchronous, blocking version of this method.

mm_gdbus_call_call_start_finish ()

gboolean
mm_gdbus_call_call_start_finish (MmGdbusCall *proxy,
                                 GAsyncResult *res,
                                 GError **error);

Finishes an operation started with mm_gdbus_call_call_start().

mm_gdbus_call_call_start_sync ()

gboolean
mm_gdbus_call_call_start_sync (MmGdbusCall *proxy,
                               GCancellable *cancellable,
                               GError **error);

Synchronously invokes the Start() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_call_call_start() for the asynchronous version of this method.

mm_gdbus_call_call_hangup ()

void
mm_gdbus_call_call_hangup (MmGdbusCall *proxy,
                           GCancellable *cancellable,
                           GAsyncReadyCallback callback,
                           gpointer user_data);

Asynchronously invokes the Hangup() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_call_call_hangup_finish() to get the result of the operation.

See mm_gdbus_call_call_hangup_sync() for the synchronous, blocking version of this method.

mm_gdbus_call_call_hangup_finish ()

gboolean
mm_gdbus_call_call_hangup_finish (MmGdbusCall *proxy,
                                  GAsyncResult *res,
                                  GError **error);

Finishes an operation started with mm_gdbus_call_call_hangup().

mm_gdbus_call_call_hangup_sync ()

gboolean
mm_gdbus_call_call_hangup_sync (MmGdbusCall *proxy,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the Hangup() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_call_call_hangup() for the asynchronous version of this method.

mm_gdbus_call_call_send_dtmf ()

void
mm_gdbus_call_call_send_dtmf (MmGdbusCall *proxy,
                              const gchar *arg_dtmf,
                              GCancellable *cancellable,
                              GAsyncReadyCallback callback,
                              gpointer user_data);

Asynchronously invokes the SendDtmf() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_call_call_send_dtmf_finish() to get the result of the operation.

See mm_gdbus_call_call_send_dtmf_sync() for the synchronous, blocking version of this method.

mm_gdbus_call_call_send_dtmf_finish ()

gboolean
mm_gdbus_call_call_send_dtmf_finish (MmGdbusCall *proxy,
                                     GAsyncResult *res,
                                     GError **error);

Finishes an operation started with mm_gdbus_call_call_send_dtmf().

mm_gdbus_call_call_send_dtmf_sync ()

gboolean
mm_gdbus_call_call_send_dtmf_sync (MmGdbusCall *proxy,
                                   const gchar *arg_dtmf,
                                   GCancellable *cancellable,
                                   GError **error);

Synchronously invokes the SendDtmf() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_call_call_send_dtmf() for the asynchronous version of this method.

mm_gdbus_call_call_deflect ()

void
mm_gdbus_call_call_deflect (MmGdbusCall *proxy,
                            const gchar *arg_number,
                            GCancellable *cancellable,
                            GAsyncReadyCallback callback,
                            gpointer user_data);

Asynchronously invokes the Deflect() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_call_call_deflect_finish() to get the result of the operation.

See mm_gdbus_call_call_deflect_sync() for the synchronous, blocking version of this method.

mm_gdbus_call_call_deflect_finish ()

gboolean
mm_gdbus_call_call_deflect_finish (MmGdbusCall *proxy,
                                   GAsyncResult *res,
                                   GError **error);

Finishes an operation started with mm_gdbus_call_call_deflect().

mm_gdbus_call_call_deflect_sync ()

gboolean
mm_gdbus_call_call_deflect_sync (MmGdbusCall *proxy,
                                 const gchar *arg_number,
                                 GCancellable *cancellable,
                                 GError **error);

Synchronously invokes the Deflect() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_call_call_deflect() for the asynchronous version of this method.

mm_gdbus_call_call_join_multiparty ()

void
mm_gdbus_call_call_join_multiparty (MmGdbusCall *proxy,
                                    GCancellable *cancellable,
                                    GAsyncReadyCallback callback,
                                    gpointer user_data);

Asynchronously invokes the JoinMultiparty() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_call_call_join_multiparty_finish() to get the result of the operation.

See mm_gdbus_call_call_join_multiparty_sync() for the synchronous, blocking version of this method.

mm_gdbus_call_call_join_multiparty_finish ()

gboolean
mm_gdbus_call_call_join_multiparty_finish
                               (MmGdbusCall *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_call_call_join_multiparty().

mm_gdbus_call_call_join_multiparty_sync ()

gboolean
mm_gdbus_call_call_join_multiparty_sync
                               (MmGdbusCall *proxy,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the JoinMultiparty() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_call_call_join_multiparty() for the asynchronous version of this method.

mm_gdbus_call_call_leave_multiparty ()

void
mm_gdbus_call_call_leave_multiparty (MmGdbusCall *proxy,
                                     GCancellable *cancellable,
                                     GAsyncReadyCallback callback,
                                     gpointer user_data);

Asynchronously invokes the LeaveMultiparty() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_call_call_leave_multiparty_finish() to get the result of the operation.

See mm_gdbus_call_call_leave_multiparty_sync() for the synchronous, blocking version of this method.

mm_gdbus_call_call_leave_multiparty_finish ()

gboolean
mm_gdbus_call_call_leave_multiparty_finish
                               (MmGdbusCall *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_call_call_leave_multiparty().

mm_gdbus_call_call_leave_multiparty_sync ()

gboolean
mm_gdbus_call_call_leave_multiparty_sync
                               (MmGdbusCall *proxy,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the LeaveMultiparty() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_call_call_leave_multiparty() for the asynchronous version of this method.

MmGdbusCall

typedef struct _MmGdbusCall MmGdbusCall;

Abstract interface type for the D-Bus interface org.freedesktop.ModemManager1.Call.

struct MmGdbusCallIface

struct MmGdbusCallIface {
  GTypeInterface parent_iface;

  gboolean (*handle_accept) (
    MmGdbusCall *object,
    GDBusMethodInvocation *invocation);

  gboolean (*handle_deflect) (
    MmGdbusCall *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_number);

  gboolean (*handle_hangup) (
    MmGdbusCall *object,
    GDBusMethodInvocation *invocation);

  gboolean (*handle_join_multiparty) (
    MmGdbusCall *object,
    GDBusMethodInvocation *invocation);

  gboolean (*handle_leave_multiparty) (
    MmGdbusCall *object,
    GDBusMethodInvocation *invocation);

  gboolean (*handle_send_dtmf) (
    MmGdbusCall *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_dtmf);

  gboolean (*handle_start) (
    MmGdbusCall *object,
    GDBusMethodInvocation *invocation);

  GVariant * (*get_audio_format) (MmGdbusCall *object);

  const gchar * (*get_audio_port) (MmGdbusCall *object);

  gint  (*get_direction) (MmGdbusCall *object);

  gboolean  (*get_multiparty) (MmGdbusCall *object);

  const gchar * (*get_number) (MmGdbusCall *object);

  gint  (*get_state) (MmGdbusCall *object);

  gint  (*get_state_reason) (MmGdbusCall *object);

  void (*dtmf_received) (
    MmGdbusCall *object,
    const gchar *arg_dtmf);

  void (*state_changed) (
    MmGdbusCall *object,
    gint arg_old,
    gint arg_new,
    guint arg_reason);
};

Virtual table for the D-Bus interface org.freedesktop.ModemManager1.Call.

The “audio-format” property

  “audio-format”             GVariant *

Represents the D-Bus property "AudioFormat".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusCall

Flags: Read / Write

Allowed values: GVariant<a{sv}>

Default value: NULL

The “audio-port” property

  “audio-port”               char *

Represents the D-Bus property "AudioPort".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusCall

Flags: Read / Write

Default value: NULL

The “direction” property

  “direction”                int

Represents the D-Bus property "Direction".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusCall

Flags: Read / Write

Default value: 0

The “multiparty” property

  “multiparty”               gboolean

Represents the D-Bus property "Multiparty".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusCall

Flags: Read / Write

Default value: FALSE

The “number” property

  “number”                   char *

Represents the D-Bus property "Number".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusCall

Flags: Read / Write

Default value: NULL

The “state” property

  “state”                    int

Represents the D-Bus property "State".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusCall

Flags: Read / Write

Default value: 0

The “state-reason” property

  “state-reason”             int

Represents the D-Bus property "StateReason".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusCall

Flags: Read / Write

Default value: 0

The “dtmf-received” signal

void
user_function (MmGdbusCall *object,
               char        *arg_dtmf,
               gpointer     user_data)

On the client-side, this signal is emitted whenever the D-Bus signal "DtmfReceived" is received.

On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal.

Flags: Run Last

The “handle-accept” signal

gboolean
user_function (MmGdbusCall           *object,
               GDBusMethodInvocation *invocation,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Accept() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_call_complete_accept() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-deflect” signal

gboolean
user_function (MmGdbusCall           *object,
               GDBusMethodInvocation *invocation,
               char                  *arg_number,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Deflect() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_call_complete_deflect() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-hangup” signal

gboolean
user_function (MmGdbusCall           *object,
               GDBusMethodInvocation *invocation,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Hangup() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_call_complete_hangup() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-join-multiparty” signal

gboolean
user_function (MmGdbusCall           *object,
               GDBusMethodInvocation *invocation,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the JoinMultiparty() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_call_complete_join_multiparty() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-leave-multiparty” signal

gboolean
user_function (MmGdbusCall           *object,
               GDBusMethodInvocation *invocation,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the LeaveMultiparty() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_call_complete_leave_multiparty() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-send-dtmf” signal

gboolean
user_function (MmGdbusCall           *object,
               GDBusMethodInvocation *invocation,
               char                  *arg_dtmf,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the SendDtmf() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_call_complete_send_dtmf() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-start” signal

gboolean
user_function (MmGdbusCall           *object,
               GDBusMethodInvocation *invocation,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Start() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_call_complete_start() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “state-changed” signal

void
user_function (MmGdbusCall *object,
               int          arg_old,
               int          arg_new,
               guint        arg_reason,
               gpointer     user_data)

On the client-side, this signal is emitted whenever the D-Bus signal "StateChanged" is received.

On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal.

Flags: Run Last