mm_gdbus_bearer_get_interface ()

const gchar *
mm_gdbus_bearer_get_interface (MmGdbusBearer *object);

Gets the value of the "Interface" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_bearer_dup_interface() if on another thread.

[skip]

mm_gdbus_bearer_dup_interface ()

gchar *
mm_gdbus_bearer_dup_interface (MmGdbusBearer *object);

Gets a copy of the "Interface" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_bearer_get_ip4_config ()

GVariant *
mm_gdbus_bearer_get_ip4_config (MmGdbusBearer *object);

Gets the value of the "Ip4Config" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_bearer_dup_ip4_config() if on another thread.

[skip]

mm_gdbus_bearer_dup_ip4_config ()

GVariant *
mm_gdbus_bearer_dup_ip4_config (MmGdbusBearer *object);

Gets a copy of the "Ip4Config" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_bearer_get_ip6_config ()

GVariant *
mm_gdbus_bearer_get_ip6_config (MmGdbusBearer *object);

Gets the value of the "Ip6Config" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_bearer_dup_ip6_config() if on another thread.

[skip]

mm_gdbus_bearer_dup_ip6_config ()

GVariant *
mm_gdbus_bearer_dup_ip6_config (MmGdbusBearer *object);

Gets a copy of the "Ip6Config" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_bearer_get_ip_timeout ()

guint
mm_gdbus_bearer_get_ip_timeout (MmGdbusBearer *object);

Gets the value of the "IpTimeout" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_bearer_get_properties ()

GVariant *
mm_gdbus_bearer_get_properties (MmGdbusBearer *object);

Gets the value of the "Properties" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_bearer_dup_properties() if on another thread.

[skip]

mm_gdbus_bearer_dup_properties ()

GVariant *
mm_gdbus_bearer_dup_properties (MmGdbusBearer *object);

Gets a copy of the "Properties" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_bearer_get_connected ()

gboolean
mm_gdbus_bearer_get_connected (MmGdbusBearer *object);

Gets the value of the "Connected" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_bearer_get_connection_error ()

GVariant *
mm_gdbus_bearer_get_connection_error (MmGdbusBearer *object);

Gets the value of the "ConnectionError" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_bearer_dup_connection_error() if on another thread.

[skip]

mm_gdbus_bearer_dup_connection_error ()

GVariant *
mm_gdbus_bearer_dup_connection_error (MmGdbusBearer *object);

Gets a copy of the "ConnectionError" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_bearer_get_suspended ()

gboolean
mm_gdbus_bearer_get_suspended (MmGdbusBearer *object);

Gets the value of the "Suspended" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_bearer_get_multiplexed ()

gboolean
mm_gdbus_bearer_get_multiplexed (MmGdbusBearer *object);

Gets the value of the "Multiplexed" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_bearer_get_bearer_type ()

guint
mm_gdbus_bearer_get_bearer_type (MmGdbusBearer *object);

Gets the value of the "BearerType" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_bearer_get_profile_id ()

gint
mm_gdbus_bearer_get_profile_id (MmGdbusBearer *object);

Gets the value of the "ProfileId" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_bearer_get_stats ()

GVariant *
mm_gdbus_bearer_get_stats (MmGdbusBearer *object);

Gets the value of the "Stats" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_bearer_dup_stats() if on another thread.

[skip]

mm_gdbus_bearer_dup_stats ()

GVariant *
mm_gdbus_bearer_dup_stats (MmGdbusBearer *object);

Gets a copy of the "Stats" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_bearer_get_reload_stats_supported ()

gboolean
mm_gdbus_bearer_get_reload_stats_supported
                               (MmGdbusBearer *object);

Gets the value of the "ReloadStatsSupported" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_bearer_call_connect ()

void
mm_gdbus_bearer_call_connect (MmGdbusBearer *proxy,
                              GCancellable *cancellable,
                              GAsyncReadyCallback callback,
                              gpointer user_data);

Asynchronously invokes the Connect() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_bearer_call_connect_finish() to get the result of the operation.

See mm_gdbus_bearer_call_connect_sync() for the synchronous, blocking version of this method.

mm_gdbus_bearer_call_connect_finish ()

gboolean
mm_gdbus_bearer_call_connect_finish (MmGdbusBearer *proxy,
                                     GAsyncResult *res,
                                     GError **error);

Finishes an operation started with mm_gdbus_bearer_call_connect().

mm_gdbus_bearer_call_connect_sync ()

gboolean
mm_gdbus_bearer_call_connect_sync (MmGdbusBearer *proxy,
                                   GCancellable *cancellable,
                                   GError **error);

Synchronously invokes the Connect() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_bearer_call_connect() for the asynchronous version of this method.

mm_gdbus_bearer_call_disconnect ()

void
mm_gdbus_bearer_call_disconnect (MmGdbusBearer *proxy,
                                 GCancellable *cancellable,
                                 GAsyncReadyCallback callback,
                                 gpointer user_data);

Asynchronously invokes the Disconnect() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_bearer_call_disconnect_finish() to get the result of the operation.

See mm_gdbus_bearer_call_disconnect_sync() for the synchronous, blocking version of this method.

mm_gdbus_bearer_call_disconnect_finish ()

gboolean
mm_gdbus_bearer_call_disconnect_finish
                               (MmGdbusBearer *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_bearer_call_disconnect().

mm_gdbus_bearer_call_disconnect_sync ()

gboolean
mm_gdbus_bearer_call_disconnect_sync (MmGdbusBearer *proxy,
                                      GCancellable *cancellable,
                                      GError **error);

Synchronously invokes the Disconnect() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_bearer_call_disconnect() for the asynchronous version of this method.

MmGdbusBearer

typedef struct _MmGdbusBearer MmGdbusBearer;

Abstract interface type for the D-Bus interface org.freedesktop.ModemManager1.Bearer.

struct MmGdbusBearerIface

struct MmGdbusBearerIface {
  GTypeInterface parent_iface;

  gboolean (*handle_connect) (
    MmGdbusBearer *object,
    GDBusMethodInvocation *invocation);

  gboolean (*handle_disconnect) (
    MmGdbusBearer *object,
    GDBusMethodInvocation *invocation);

  guint  (*get_bearer_type) (MmGdbusBearer *object);

  gboolean  (*get_connected) (MmGdbusBearer *object);

  GVariant * (*get_connection_error) (MmGdbusBearer *object);

  const gchar * (*get_interface) (MmGdbusBearer *object);

  GVariant * (*get_ip4_config) (MmGdbusBearer *object);

  GVariant * (*get_ip6_config) (MmGdbusBearer *object);

  guint  (*get_ip_timeout) (MmGdbusBearer *object);

  gboolean  (*get_multiplexed) (MmGdbusBearer *object);

  gint  (*get_profile_id) (MmGdbusBearer *object);

  GVariant * (*get_properties) (MmGdbusBearer *object);

  gboolean  (*get_reload_stats_supported) (MmGdbusBearer *object);

  GVariant * (*get_stats) (MmGdbusBearer *object);

  gboolean  (*get_suspended) (MmGdbusBearer *object);
};

Virtual table for the D-Bus interface org.freedesktop.ModemManager1.Bearer.

The “bearer-type” property

  “bearer-type”              guint

Represents the D-Bus property "BearerType".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusBearer

Flags: Read / Write

Default value: 0

The “connected” property

  “connected”                gboolean

Represents the D-Bus property "Connected".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusBearer

Flags: Read / Write

Default value: FALSE

The “connection-error” property

  “connection-error”         GVariant *

Represents the D-Bus property "ConnectionError".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusBearer

Flags: Read / Write

Allowed values: GVariant<(ss)>

Default value: NULL

The “interface” property

  “interface”                char *

Represents the D-Bus property "Interface".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusBearer

Flags: Read / Write

Default value: NULL

The “ip-timeout” property

  “ip-timeout”               guint

Represents the D-Bus property "IpTimeout".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusBearer

Flags: Read / Write

Default value: 0

The “ip4-config” property

  “ip4-config”               GVariant *

Represents the D-Bus property "Ip4Config".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusBearer

Flags: Read / Write

Allowed values: GVariant<a{sv}>

Default value: NULL

The “ip6-config” property

  “ip6-config”               GVariant *

Represents the D-Bus property "Ip6Config".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusBearer

Flags: Read / Write

Allowed values: GVariant<a{sv}>

Default value: NULL

The “multiplexed” property

  “multiplexed”              gboolean

Represents the D-Bus property "Multiplexed".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusBearer

Flags: Read / Write

Default value: FALSE

The “profile-id” property

  “profile-id”               int

Represents the D-Bus property "ProfileId".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusBearer

Flags: Read / Write

Default value: 0

The “properties” property

  “properties”               GVariant *

Represents the D-Bus property "Properties".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusBearer

Flags: Read / Write

Allowed values: GVariant<a{sv}>

Default value: NULL

The “reload-stats-supported” property

  “reload-stats-supported”   gboolean

Represents the D-Bus property "ReloadStatsSupported".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusBearer

Flags: Read / Write

Default value: FALSE

The “stats” property

  “stats”                    GVariant *

Represents the D-Bus property "Stats".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusBearer

Flags: Read / Write

Allowed values: GVariant<a{sv}>

Default value: NULL

The “suspended” property

  “suspended”                gboolean

Represents the D-Bus property "Suspended".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusBearer

Flags: Read / Write

Default value: FALSE

The “handle-connect” signal

gboolean
user_function (MmGdbusBearer         *object,
               GDBusMethodInvocation *invocation,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Connect() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_bearer_complete_connect() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-disconnect” signal

gboolean
user_function (MmGdbusBearer         *object,
               GDBusMethodInvocation *invocation,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Disconnect() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_bearer_complete_disconnect() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last