Contents

Bars3D QML Type

3D bar graph. More...

Import Statement: import QtGraphs
Inherits:

GraphsItem3D

Properties

Signals

Methods

Detailed Description

This type enables developers to render bar graphs in 3D with Qt Quick.

You will need to import Qt Graphs module to use this type:

 import QtGraphs

After that you can use Bars3D in your qml files:

 import QtQuick
 import QtGraphs

 Item {
     width: 640
     height: 480

     Bars3D {
         width: parent.width
         height: parent.height

         Bar3DSeries {
             itemLabelFormat: "@colLabel, @rowLabel: @valueLabel"

             ItemModelBarDataProxy {
                 itemModel: dataModel
                 // Mapping model roles to bar series rows, columns, and values.
                 rowRole: "year"
                 columnRole: "city"
                 valueRole: "expenses"
             }
         }
     }

     ListModel {
         id: dataModel
         ListElement{ year: "2022"; city: "Oulu";     expenses: "4200"; }
         ListElement{ year: "2022"; city: "Rauma";    expenses: "2100"; }
         ListElement{ year: "2022"; city: "Helsinki"; expenses: "7040"; }
         ListElement{ year: "2022"; city: "Tampere";  expenses: "4330"; }
         ListElement{ year: "2023"; city: "Oulu";     expenses: "3960"; }
         ListElement{ year: "2023"; city: "Rauma";    expenses: "1990"; }
         ListElement{ year: "2023"; city: "Helsinki"; expenses: "7230"; }
         ListElement{ year: "2023"; city: "Tampere";  expenses: "4650"; }
     }
 }

See Simple Bar Graph for more thorough usage example.

See also Bar3DSeries, ItemModelBarDataProxy, Scatter3D, Surface3D, and Qt Graphs C++ Classes for 3D.

Property Documentation

ambientLightStrength : real

The ambient light strength for the whole graph. This value determines how evenly and brightly the colors are shown throughout the graph regardless of the light position. The value must be between 0.0 and 1.0.


aspectRatio : real

The ratio of the graph scaling between the longest axis on the horizontal plane and the y-axis. Defaults to 2.0.

Note: Has no effect on Bars3D.

See also horizontalAspectRatio.


barSeriesMargin : size

Margin between series columns in X and Z dimensions. Preset to (0.0, 0.0) by default. Sensible values are on the range [0,1).


barSpacing : size

Bar spacing in X and Z dimensions.

Preset to (1.0, 1.0) by default. Spacing is affected by the barSpacingRelative property.


barSpacingRelative : bool

Whether spacing is absolute or relative to bar thickness.

If true, the value of 0.0 means that the bars are placed side-to-side, 1.0 means that a space as wide as the thickness of one bar is left between the bars, and so on. Preset to true.


barThickness : real

The bar thickness ratio between the X and Z dimensions. The value 1.0 means that the bars are as wide as they are deep, whereas 0.5 makes them twice as deep as they are wide.


cameraPreset : Graphs3D.CameraPreset

The currently active camera preset, which is one of Graphs3D.CameraPreset. If no preset is active, the value is Graphs3D.CameraPreset.None.


cameraTargetPosition : vector3d

The camera target as a vector3d. Defaults to vector3d(0.0, 0.0, 0.0).

Valid coordinate values are between -1.0...1.0, where the edge values indicate the edges of the corresponding axis range. Any values outside this range are clamped to the edge.

Note: For bar graphs, the Y-coordinate is ignored and camera always targets a point on the horizontal background.


cameraXRotation : float

The X-rotation angle of the camera around the target point in degrees starting from the current base position.


cameraYRotation : float

The Y-rotation angle of the camera around the target point in degrees starting from the current base position.


cameraZoomLevel : float

The camera zoom level in percentage. The default value of 100.0 means there is no zoom in or out set in the camera. The value is limited by the minCameraZoomLevel and maxCameraZoomLevel properties.

See also minCameraZoomLevel and maxCameraZoomLevel.


columnAxis : Category3DAxis

The active column axis.

If an axis is not given, a temporary default axis with no labels is created. This temporary axis is destroyed if another axis is explicitly set to the same orientation.


currentFps : int

When FPS measuring is enabled, the results for the last second are stored in this read-only property. It takes at least a second before this value updates after measuring is activated.

See also measureFps.


customItemList : list<Custom3DItem>

The list of Custom3DItem items added to the graph. The graph takes ownership of the added items.


floorLevel : real

The floor level for the bar graph in Y-axis data coordinates.

The actual floor level will be restricted by the Y-axis minimum and maximum values. Defaults to zero.


gridLineType : Graphs3D.GridLineType

Defines whether the grid lines type is Graphs3D.GridLineType.Shader or Graphs3D.GridLineType.Geometry.

This value affects all grid lines.


horizontalAspectRatio : real

The ratio of the graph scaling between the x-axis and z-axis. The value of 0.0 indicates automatic scaling according to axis ranges. Defaults to 0.0.

Note: Has no effect on Bars3D, which handles scaling on the horizontal plane via the barThickness and barSpacing properties. Polar graphs also ignore this property.

See also aspectRatio, polar, Bars3D::barThickness, and Bars3D::barSpacing.


labelMargin : real

brief This property specifies the margin for the placement of the axis labels.

Negative values place the labels inside the plot-area while positive values place them outside the plot-area. Label automatic rotation is disabled when the value is negative. Defaults to 0.1

See also QAbstract3DAxis::labelAutoAngle.


lightColor : color

The color of the ambient and specular light defined in Scene3D.


lightStrength : real

The specular light strength for the whole graph. The value must be between 0.0 and 10.0.

This value affects the light specified in Scene3D.


locale : locale

Sets the locale used for formatting various numeric labels. Defaults to the "C" locale.

See also Value3DAxis::labelFormat.


margin : real

The absolute value used for the space left between the edge of the plottable graph area and the edge of the graph background.

If the margin value is negative, the margins are determined automatically and can vary according to the size of the items in the series and the type of the graph. The value is interpreted as a fraction of the y-axis range if the graph aspect ratios have not beed changed from the default values. Defaults to -1.0.

Note: Setting a smaller margin for a scatter graph than the automatically determined margin can cause the scatter items at the edges of the graph to overlap with the graph background.

Note: On scatter and surface graphs, if the margin is small in comparison to the axis label size, the positions of the edge labels of the axes are adjusted to avoid overlap with the edge labels of the neighboring axes.


maxCameraZoomLevel : float

Sets the maximum allowed camera zoom level. If the new maximum level is lower than the existing minimum level, the minimum level is adjusted to the new maximum as well. If the current cameraZoomLevel is outside the new bounds, it is adjusted as well. Defaults to 500.0f.

See also cameraZoomLevel and minCameraZoomLevel.


measureFps : bool

If true, the rendering is done continuously instead of on demand, and the value of the currentFps property is updated. Defaults to false.

See also currentFps.


minCameraZoomLevel : float

Sets the minimum allowed camera zoom level. If the new minimum level is higher than the existing maximum level, the maximum level is adjusted to the new minimum as well. If the current cameraZoomLevel is outside the new bounds, it is adjusted as well. The minCameraZoomLevel cannot be set below 1.0. Defaults to 10.0.

See also cameraZoomLevel and maxCameraZoomLevel.


msaaSamples : int

The number of samples used in multisample antialiasing when renderingMode is Indirect. When renderingMode is DirectToBackground, this property value is read-only and returns the number of samples specified by the window surface format. Defaults to 4.

See also renderingMode.


multiSeriesUniform : bool

Defines whether bars are to be scaled with proportions set to a single series bar even if there are multiple series displayed. If set to true, bar spacing will be correctly applied only to the X-axis. Preset to false by default.


optimizationHint : Graphs3D.OptimizationHint

Whether the default, static, or legacy mode is used for rendering optimization.

The default mode uses instanced rendering, and provides the full feature set at the best level of performance on most systems. The static mode optimizes graph rendering and is ideal for large non-changing data sets. It is slower with dynamic data changes and item rotations. Selection is not optimized, so using the static mode with massive data sets is not advisable. Legacy mode renders all items in th graph individually, without instancing. It should be used only if default mode does not work, that is the same as if the target system does not support instancing. Defaults to Default.

Note: On some environments, large graphs using static optimization may not render, because all of the items are rendered using a single draw call, and different graphics drivers support different maximum vertice counts per call. This is mostly an issue on 32bit and OpenGL ES2 platforms. To work around this issue, choose an item mesh with a low vertex count or use the point mesh.

See also Abstract3DSeries::mesh and QtGraphs3D::OptimizationHint.


orthoProjection : bool

If true, orthographic projection will be used for displaying the graph. Defaults to false.

Note: Shadows will be disabled when set to true.


polar : bool

If true, the horizontal axes are changed into polar axes. The x-axis becomes the angular axis and the z-axis becomes the radial axis. Polar mode is not available for bar graphs.

Defaults to false.

See also orthoProjection and radialLabelOffset.


primarySeries : Bar3DSeries

The primary series of the graph. It is used to determine the row and column axis labels when the labels are not explicitly set to the axes.

If the specified series is not yet added to the graph, setting it as the primary series will also implicitly add it to the graph.

If the primary series itself is removed from the graph, this property resets to default.

If the series is null, this property resets to default. Defaults to the first added series or zero if no series are added to the graph.


queriedGraphPosition : vector3d

This read-only property contains the latest graph position values along each axis queried using Scene3D::graphPositionQuery. The values are normalized to range [-1, 1]. If the queried position was outside the graph bounds, the values will not reflect the real position, but will instead be some undefined position outside the range [-1, 1]. The value will be undefined until a query is made.

There is no single correct 3D coordinate to match a particular screen position, so to be consistent, the queries are always done against the inner sides of an invisible box surrounding the graph.

Note: Bar graphs only allow querying graph position at the graph floor level, so the y-value is always zero for bar graphs and valid queries can be only made at screen positions that contain the floor of the graph.

See also Scene3D::graphPositionQuery.


radialLabelOffset : real

This property specifies the normalized horizontal offset for the axis labels of the radial polar axis. The value 0.0 indicates that the labels should be drawn next to the 0-angle angular axis grid line. The value 1.0 indicates that the labels are drawn in their usual place at the edge of the graph background. This property is ignored if the polar property value is false. Defaults to 1.0.

See also polar.


renderingMode : Graphs3D.RenderingMode

How the graph will be rendered. Defaults to Indirect.

ConstantDescription
DirectToBackgroundIndicates that the graph will be rendered directly on the window background and QML items are rendered on top of it. Using non-transparent QML item as a background will hide the graph. Clears the whole window before rendering the graph, including the areas outside the graph. If the surface format of the window supports antialiasing, it will be used (see qDefaultSurfaceFormat()). This rendering mode offers the best performance at the expense of non-standard QML behavior. For example, the graphs do not obey the z ordering of QML items and the opacity value has no effect on them.
IndirectIndicates the graph will be first rendered to an offscreen surface that is then drawn during normal QML item rendering. The rendered image is antialiased using the multisampling method if it is supported in the current environment and the msaaSamples property value is greater than zero. This rendering mode offers good quality and normal QML item behavior at the expense of performance.

Note: Antialiasing is not supported in OpenGL ES2 environments in any rendering mode.

Note: Setting the antialiasing property of the graph does not do anything. However, it is set by the graph itself if the current rendering mode uses antialiasing.

See also msaaSamples.


rotationEnabled : bool

Whether this input handler allows graph rotation.

Defaults to true.


rowAxis : Category3DAxis

The active row axis.

If an axis is not given, a temporary default axis with no labels is created. This temporary axis is destroyed if another axis is explicitly set to the same orientation.


scene : Scene3D

The Scene3D pointer that can be used to manipulate the scene and access the scene elements.

This property is read-only.


selectedElement : Graphs3D.ElementType

The element selected in the graph.

This property can be used to query the selected element type. The type is valid until a new selection is made in the graph and the selectedElementChanged signal is emitted.

The signal can be used for example for implementing customized input handling, as demonstrated by the Axis Handling example.

See also selectedLabelIndex(), selectedAxis(), selectedCustomItemIndex(), selectedCustomItem(), Bars3D::selectedSeries, Scatter3D::selectedSeries, Scene3D::selectionQueryPosition, and QtGraphs3D::ElementType.


selectedSeries : Bar3DSeries

The selected series or null. If selectionMode has the SelectionMultiSeries flag set, this property holds the series that owns the selected bar.


selectionEnabled : bool

Whether this input handler allows selection from the graph.

Defaults to true.


selectionMode : Graphs3D.SelectionMode

The active selection mode in the graph. One of the QtGraphs3D::SelectionFlag enum values.

See also QtGraphs3D::SelectionFlag.


seriesList : list<Bar3DSeries> [default]

The series of the graph. By default, this property contains an empty list. To set the series, either use the addSeries() function or define them as children of the graph.


shadowQuality : Graphs3D.ShadowQuality

The quality of shadows. One of the QtGraphs3D::ShadowQuality enum values.

See also QtGraphs3D::ShadowQuality.


shadowStrength : real

The shadow strength for the whole graph. The higher the number, the darker the shadows will be. The value must be between 0.0 and 100.0.

This value affects the light specified in Scene3D.


theme : GraphsTheme

The active theme of the graph.

See also GraphsTheme.


valueAxis : ValueAxis3D

The active value axis.

If an axis is not given, a temporary default axis with no labels and an automatically adjusting range is created. This temporary axis is destroyed if another axis is explicitly set to the same orientation.


wrapCameraXRotation : bool

The behavior of the minimum and maximum limits in the X-rotation. By default, the X-rotation wraps from minimum value to maximum and from maximum to minimum.

If set to true, the X-rotation of the camera is wrapped from minimum to maximum and from maximum to minimum. If set to false, the X-rotation of the camera is limited to the sector determined by the minimum and maximum values.


wrapCameraYRotation : bool

The behavior of the minimum and maximum limits in the Y-rotation. By default, the Y-rotation is limited between the minimum and maximum values without any wrapping.

If true, the Y-rotation of the camera is wrapped from minimum to maximum and from maximum to minimum. If false, the Y-rotation of the camera is limited to the sector determined by the minimum and maximum values.


zoomAtTargetEnabled : bool

Whether zooming should change the camera target so that the zoomed point of the graph stays at the same location after the zoom.

Defaults to true.


zoomEnabled : bool

Whether this input handler allows graph zooming.

Defaults to true.


Signal Documentation

barSeriesMarginChanged(size margin)

This signal is emitted when barSeriesMargin changes to margin.

Note: The corresponding handler is onBarSeriesMarginChanged.


barSpacingChanged(size spacing)

This signal is emitted when barSpacing changes to spacing.

Note: The corresponding handler is onBarSpacingChanged.


barSpacingRelativeChanged(bool relative)

This signal is emitted when barSpacingRelative changes to relative.

Note: The corresponding handler is onBarSpacingRelativeChanged.


barThicknessChanged(real thicknessRatio)

This signal is emitted when barThickness changes to thicknessRatio.

Note: The corresponding handler is onBarThicknessChanged.


columnAxisChanged(Category3DAxis axis)

This signal is emitted when columnAxis changes to axis.

Note: The corresponding handler is onColumnAxisChanged.


doubleTapped(QEventPoint eventPoint, Qt::MouseButton button)

This signal is emitted when the graph item is tapped twice within a short span of time. The eventPoint signal parameter contains information from the release event about the point that was tapped, and button is the mouse button that was clicked, or NoButton on a touchscreen.

Note: The corresponding handler is onDoubleTapped.

See also QEventPoint, Qt::MouseButtons, and TapHandler::doubleTapped.


dragged(QVector2D delta)

This signal is emitted when the translation of the cluster of points on the graph is changed while the pinch gesture is being performed. The delta vector gives the change in translation.

Note: The corresponding handler is onDragged.

See also PinchHandler::translationChanged.


floorLevelChanged(real level)

This signal is emitted when floorLevel changes to level.

Note: The corresponding handler is onFloorLevelChanged.


longPressed()

This signal is emitted when the parent Item is pressed and held for a time period greater than TapHandler::longPressThreshold.

Note: The corresponding handler is onLongPressed.

See also TapHandler::longPressed.


mouseMove(QPoint mousePos)

This signal is emitted when the graph receives a mouseMove event. mousePos value gives the position of mouse while mouse is moving.

Note: The corresponding handler is onMouseMove.

See also QQuickItem::mouseMoveEvent.


multiSeriesUniformChanged(bool uniform)

This signal is emitted when multiSeriesUniform changes to uniform.

Note: The corresponding handler is onMultiSeriesUniformChanged.


pinch(qreal delta)

This signal is emitted when the scale factor on the graph changes while the pinch gesture is being performed. The delta value gives the multiplicative change in scale.

Note: The corresponding handler is onPinch.

See also PinchHandler::scaleChanged.


primarySeriesChanged(Bar3DSeries series)

This signal is emitted when primarySeries changes to series.

Note: The corresponding handler is onPrimarySeriesChanged.


rowAxisChanged(Category3DAxis axis)

This signal is emitted when rowAxis changes to axis.

Note: The corresponding handler is onRowAxisChanged.


selectedSeriesChanged(Bar3DSeries series)

This signal is emitted when selectedSeries changes to series.

Note: The corresponding handler is onSelectedSeriesChanged.


tapped(QEventPoint eventPoint, Qt::MouseButton button)

This signal is emitted when the graph item is tapped once. The eventPoint signal parameter contains information from the release event about the point that was tapped, and button is the mouse button that was clicked, or NoButton on a touchscreen.

Note: The corresponding handler is onTapped.

See also QEventPoint, Qt::MouseButtons, and TapHandler::singleTapped.


valueAxisChanged(ValueAxis3D axis)

This signal is emitted when valueAxis changes to axis.

Note: The corresponding handler is onValueAxisChanged.


wheel(QQuickWheelEvent *event)

This signal is emitted every time the graph receives an event of type QWheelEvent: that is, every time the wheel is moved or the scrolling gesture is updated.

Note: The corresponding handler is onWheel.

See also WheelEvent and WheelHandler::wheel.


Method Documentation

qsizetype addCustomItem(Custom3DItem item)

Adds a Custom3DItem item to the graph. Graph takes ownership of the added item.

Returns index to the added item if add was successful, -1 if trying to add a null item, and index of the item if trying to add an already added item.

See also removeCustomItems(), removeCustomItem(), and removeCustomItemAt().


void addSeries(Bar3DSeries series)

Adds the series to the graph. A graph can contain multiple series, but only one set of axes, so the rows and columns of all series must match for the visualized data to be meaningful. If the graph has multiple visible series, only the first one added will generate the row or column labels on the axes in cases where the labels are not explicitly set to the axes. If the newly added series has specified a selected bar, it will be highlighted and any existing selection will be cleared. Only one added series can have an active selection.

See also GraphsItem3D::hasSeries().


void clearSelection()

Clears selection from all attached series.


bool hasSeries(Abstract3DSeries series)

Returns whether the series has already been added to the graph.


void insertSeries(int index, Bar3DSeries series)

Inserts the series into the position index in the series list. If the series has already been added to the list, it is moved to the new index.

Note: When moving a series to a new index that is after its old index, the new position in list is calculated as if the series was still in its old index, so the final index is actually the index decremented by one.

See also GraphsItem3D::hasSeries().


void releaseCustomItem(Custom3DItem item)

Gets ownership of item back and removes the item from the graph.

Note: If the same item is added back to the graph, the texture file needs to be re-set.

See also Custom3DItem::textureFile.


void removeCustomItem(Custom3DItem item)

Removes the custom item. Deletes the resources allocated to it.


void removeCustomItemAt(vector3d position)

Removes all custom items at position. Deletes the resources allocated to them.


void removeCustomItems()

Removes all custom items. Deletes the resources allocated to them.


void removeSeries(Bar3DSeries series)

Remove the series from the graph.

See also GraphsItem3D::hasSeries().


Abstract3DAxis selectedAxis()

Can be used to get the selected axis after receiving selectedElementChanged signal with any label type. Selection is valid until the next selectedElementChanged signal.

Returns the selected axis, or null.

See also selectedElement.


Custom3DItem selectedCustomItem()

Can be used to get the selected custom item after receiving selectedElementChanged signal with ElementType.CustomItem type. Ownership of the item remains with the graph. Selection is valid until the next selectedElementChanged signal.

Returns the selected custom item, or null.

See also selectedElement.


qsizetype selectedCustomItemIndex()

Can be used to query the index of the selected custom item after receiving selectedElementChanged signal with ElementType.CustomItem type. Selection is valid until the next selectedElementChanged signal.

Returns index of the selected custom item, or -1.

See also selectedElement.


int selectedLabelIndex()

Can be used to query the index of the selected label after receiving selectedElementChanged signal with any label type. Selection is valid until the next selectedElementChanged signal.

Returns index of the selected label, or -1.

See also selectedElement.


© 2024 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners.
The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation.
Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.