QSqlDriver Class

Member Function Documentation

QSqlDriver::QSqlDriver(QObject *parent = nullptr)

Constructs a new driver with the given parent.

[signal] void QSqlDriver::notification(const QString &name, QSqlDriver::NotificationSource source, const QVariant &payload)

This signal is emitted when the database posts an event notification that the driver subscribes to. name identifies the event notification, source indicates the signal source, payload holds the extra data optionally delivered with the notification.

Note: Signal notification is overloaded in this class. To connect to this signal by using the function pointer syntax, Qt provides a convenient helper for obtaining the function pointer as shown in this example:

 connect(sqlDriver, QOverload<const QString &, QSqlDriver::NotificationSource, const QVariant &>::of(&QSqlDriver::notification),
     [=](const QString &name, QSqlDriver::NotificationSource source, const QVariant &payload){ /* ... */ });

This function was introduced in Qt 5.0.

See also subscribeToNotification().

[virtual] QSqlDriver::~QSqlDriver()

Destroys the object and frees any allocated resources.

[virtual] bool QSqlDriver::beginTransaction()

This function is called to begin a transaction. If successful, return true, otherwise return false. The default implementation does nothing and returns false.

See also commitTransaction() and rollbackTransaction().

[pure virtual] void QSqlDriver::close()

Derived classes must reimplement this pure virtual function in order to close the database connection. Return true on success, false on failure.

See also open() and setOpen().

[virtual] bool QSqlDriver::commitTransaction()

This function is called to commit a transaction. If successful, return true, otherwise return false. The default implementation does nothing and returns false.

See also beginTransaction() and rollbackTransaction().

[pure virtual] QSqlResult *QSqlDriver::createResult() const

Creates an empty SQL result on the database. Derived classes must reimplement this function and return a QSqlResult object appropriate for their database to the caller.

[virtual] QString QSqlDriver::escapeIdentifier(const QString &identifier, IdentifierType type) const

Returns the identifier escaped according to the database rules. identifier can either be a table name or field name, dependent on type.

The default implementation does nothing.

See also isIdentifierEscaped().

[virtual] QString QSqlDriver::formatValue(const QSqlField &field, bool trimStrings = false) const

Returns a string representation of the field value for the database. This is used, for example, when constructing INSERT and UPDATE statements.

The default implementation returns the value formatted as a string according to the following rules:

• If field is character data, the value is returned enclosed in single quotation marks, which is appropriate for many SQL databases. Any embedded single-quote characters are escaped (replaced with two single-quote characters). If trimStrings is true (the default is false), all trailing whitespace is trimmed from the field.
• If field is date/time data, the value is formatted in ISO format and enclosed in single quotation marks. If the date/time data is invalid, "NULL" is returned.
• If field is bytearray data, and the driver can edit binary fields, the value is formatted as a hexadecimal string.
• For any other field type, toString() is called on its value and the result of this is returned.

See also QVariant::toString().

[virtual] QVariant QSqlDriver::handle() const

Returns the low-level database handle wrapped in a QVariant or an invalid variant if there is no handle.

The handle returned here is database-dependent, you should query the type name of the variant before accessing it.

This example retrieves the handle for a connection to sqlite:

 QSqlDatabase db = QSqlDatabase::database();
 QVariant v = db.driver()->handle();
 if (v.isValid() && (qstrcmp(v.typeName(), "sqlite3*") == 0)) {
     // v.data() returns a pointer to the handle
     sqlite3 *handle = *static_cast<sqlite3 **>(v.data());
     if (handle) {
         // ...
     }
 }

This snippet returns the handle for PostgreSQL or MySQL:

 if (qstrcmp(v.typeName(), "PGconn*") == 0) {
     PGconn *handle = *static_cast<PGconn **>(v.data());
     if (handle) {
         // ...
     }
 }

 if (qstrcmp(v.typeName(), "MYSQL*") == 0) {
     MYSQL *handle = *static_cast<MYSQL **>(v.data());
     if (handle) {
         // ...
     }
 }

See also QSqlResult::handle().

[pure virtual] bool QSqlDriver::hasFeature(DriverFeature feature) const

Returns true if the driver supports feature feature; otherwise returns false.

Note that some databases need to be open() before this can be determined.

See also DriverFeature.

[virtual] bool QSqlDriver::isIdentifierEscaped(const QString &identifier, IdentifierType type) const

Returns whether identifier is escaped according to the database rules. identifier can either be a table name or field name, dependent on type.

Reimplement this function if you want to provide your own implementation in your QSqlDriver subclass,

See also stripDelimiters() and escapeIdentifier().

[virtual] bool QSqlDriver::isOpen() const

Returns true if the database connection is open; otherwise returns false.

bool QSqlDriver::isOpenError() const

Returns true if the there was an error opening the database connection; otherwise returns false.

QSqlError QSqlDriver::lastError() const

Returns a QSqlError object which contains information about the last error that occurred on the database.

See also setLastError().

QSql::NumericalPrecisionPolicy QSqlDriver::numericalPrecisionPolicy() const

Returns the current default precision policy for the database connection.

This function was introduced in Qt 4.6.

See also QSql::NumericalPrecisionPolicy, setNumericalPrecisionPolicy(), QSqlQuery::numericalPrecisionPolicy(), and QSqlQuery::setNumericalPrecisionPolicy().

[pure virtual] bool QSqlDriver::open(const QString &db, const QString &user = QString(), const QString &password = QString(), const QString &host = QString(), int port = -1, const QString &options = QString())

Derived classes must reimplement this pure virtual function to open a database connection on database db, using user name user, password password, host host, port port and connection options options.

The function must return true on success and false on failure.

See also setOpen().

[virtual] QSqlIndex QSqlDriver::primaryIndex(const QString &tableName) const

Returns the primary index for table tableName. Returns an empty QSqlIndex if the table doesn't have a primary index. The default implementation returns an empty index.

[virtual] QSqlRecord QSqlDriver::record(const QString &tableName) const

Returns a QSqlRecord populated with the names of the fields in table tableName. If no such table exists, an empty record is returned. The default implementation returns an empty record.

[virtual] bool QSqlDriver::rollbackTransaction()

This function is called to rollback a transaction. If successful, return true, otherwise return false. The default implementation does nothing and returns false.

See also beginTransaction() and commitTransaction().

[virtual protected] void QSqlDriver::setLastError(const QSqlError &error)

This function is used to set the value of the last error, error, that occurred on the database.

See also lastError().

void QSqlDriver::setNumericalPrecisionPolicy(QSql::NumericalPrecisionPolicy precisionPolicy)

Sets the default numerical precision policy used by queries created by this driver to precisionPolicy.

Note: Setting the default precision policy to precisionPolicy doesn't affect any currently active queries.

This function was introduced in Qt 4.6.

See also QSql::NumericalPrecisionPolicy, numericalPrecisionPolicy(), QSqlQuery::setNumericalPrecisionPolicy(), and QSqlQuery::numericalPrecisionPolicy().

[virtual protected] void QSqlDriver::setOpen(bool open)

This function sets the open state of the database to open. Derived classes can use this function to report the status of open().

See also open() and setOpenError().

[virtual protected] void QSqlDriver::setOpenError(bool error)

This function sets the open error state of the database to error. Derived classes can use this function to report the status of open(). Note that if error is true the open state of the database is set to closed (i.e., isOpen() returns false).

See also isOpenError(), open(), and setOpen().

[virtual] QString QSqlDriver::sqlStatement(StatementType type, const QString &tableName, const QSqlRecord &rec, bool preparedStatement) const

Returns a SQL statement of type type for the table tableName with the values from rec. If preparedStatement is true, the string will contain placeholders instead of values.

The generated flag in each field of rec determines whether the field is included in the generated statement.

This method can be used to manipulate tables without having to worry about database-dependent SQL dialects. For non-prepared statements, the values will be properly escaped.

In the WHERE statement, each non-null field of rec specifies a filter condition of equality to the field value, or if prepared, a placeholder. However, prepared or not, a null field specifies the condition IS NULL and never introduces a placeholder. The application must not attempt to bind data for the null field during execution. The field must be set to some non-null value if a placeholder is desired. Furthermore, since non-null fields specify equality conditions and SQL NULL is not equal to anything, even itself, it is generally not useful to bind a null to a placeholder.

[virtual] QString QSqlDriver::stripDelimiters(const QString &identifier, IdentifierType type) const

Returns the identifier with the leading and trailing delimiters removed, identifier can either be a table name or field name, dependent on type. If identifier does not have leading and trailing delimiter characters, identifier is returned without modification.

Reimplement this function if you want to provide your own implementation in your QSqlDriver subclass,

This function was introduced in Qt 4.5.

See also isIdentifierEscaped().

[virtual] bool QSqlDriver::subscribeToNotification(const QString &name)

This function is called to subscribe to event notifications from the database. name identifies the event notification.

If successful, return true, otherwise return false.

The database must be open when this function is called. When the database is closed by calling close() all subscribed event notifications are automatically unsubscribed. Note that calling open() on an already open database may implicitly cause close() to be called, which will cause the driver to unsubscribe from all event notifications.

When an event notification identified by name is posted by the database the notification() signal is emitted.

Reimplement this function if you want to provide event notification support in your own QSqlDriver subclass,

This function was introduced in Qt 4.4.

See also unsubscribeFromNotification(), subscribedToNotifications(), and QSqlDriver::hasFeature().

[virtual] QStringList QSqlDriver::subscribedToNotifications() const

Returns a list of the names of the event notifications that are currently subscribed to.

Reimplement this function if you want to provide event notification support in your own QSqlDriver subclass,

This function was introduced in Qt 4.4.

See also subscribeToNotification() and unsubscribeFromNotification().

[virtual] QStringList QSqlDriver::tables(QSql::TableType tableType) const

Returns a list of the names of the tables in the database. The default implementation returns an empty list.

The tableType argument describes what types of tables should be returned. Due to binary compatibility, the string contains the value of the enum QSql::TableTypes as text. An empty string should be treated as QSql::Tables for backward compatibility.

[virtual] bool QSqlDriver::unsubscribeFromNotification(const QString &name)

This function is called to unsubscribe from event notifications from the database. name identifies the event notification.

If successful, return true, otherwise return false.

The database must be open when this function is called. All subscribed event notifications are automatically unsubscribed from when the close() function is called.

After calling this function the notification() signal will no longer be emitted when an event notification identified by name is posted by the database.

Reimplement this function if you want to provide event notification support in your own QSqlDriver subclass,

This function was introduced in Qt 4.4.

See also subscribeToNotification() and subscribedToNotifications().