QVulkanInstance Class

Detailed Description

Vulkan is a cross-platform, explicit graphics and compute API. This class provides support for loading a Vulkan library and creating an instance in a cross-platform manner. For an introduction on Vulkan instances, refer to section 3.2 of the specification.

Initialization

Similarly to QOpenGLContext, any actual Vulkan instance creation happens only when calling create(). This allows using QVulkanInstance as a plain member variable while retaining control over when to perform initialization.

Querying the supported instance-level layers and extensions is possible by calling supportedLayers() and supportedExtensions(). These ensure the Vulkan library is loaded, and can therefore be called safely before create() as well.

Instances store per-application Vulkan state and creating a VkInstance object initializes the Vulkan library. In practice there will typically be a single instance constructed early on in main(). The object then stays alive until exiting the application.

Every Vulkan-based QWindow must be associated with a QVulkanInstance by calling QWindow::setVulkanInstance(). Thus a typical application pattern is the following:

     int main(int argc, char **argv)
     {
         QGuiApplication app(argc, argv);

         QVulkanInstance inst;
         if (!inst.create())
             return 1;

         ...
         window->setVulkanInstance(&inst);
         window->show();

         return app.exec();
     }

Configuration

QVulkanInstance automatically enables the minimum set of extensions it needs on the newly created instance. In practice this means the VK_KHR_*_surface family of extensions.

By default Vulkan debug output, for example messages from the validation layers, is routed to qDebug(). This can be disabled by passing the flag NoDebugOutputRedirect to setFlags() before invoking create().

To enable additional layers and extensions, provide the list via setLayers() and setExtensions() before invoking create(). When a given layer or extension is not reported as available from the instance, the request is ignored. After a successful call to create(), the values returned from functions like layers() and extensions() reflect the actual enabled layers and extensions. When necessary, for example to avoid requesting extensions that conflict and thus would fail the Vulkan instance creation, the list of actually supported layers and extensions can be examined via supportedLayers() and supportedExtensions() before calling create().

For example, to enable the standard validation layers, one could do the following:

     QVulkanInstance inst;

     // Enable validation layer, if supported. Messages go to qDebug by default.
     inst.setLayers(QByteArrayList() << "VK_LAYER_LUNARG_standard_validation");

     bool ok = inst.create();
     if (!ok)
         ... // Vulkan not available
     if (!inst.layers().contains("VK_LAYER_LUNARG_standard_validation"))
         ... // validation layer not available

Or, alternatively, to make decisions before attempting to create a Vulkan instance:

     QVulkanInstance inst;

     if (inst.supportedLayers().contains("VK_LAYER_LUNARG_standard_validation"))
         ...

     bool ok = inst.create();
     ...

Adopting an Existing Instance

By default QVulkanInstance creates a new Vulkan instance. When working with external engines and renderers, this may sometimes not be desirable. When there is a VkInstance handle already available, call setVkInstance() before invoking create(). This way no additional instances will get created, and QVulkanInstance will not own the handle.

Accessing Core Vulkan Commands

To access the VkInstance handle the QVulkanInstance wraps, call vkInstance(). To resolve Vulkan functions, call getInstanceProcAddr(). For core Vulkan commands manual resolving is not necessary as they are provided via the QVulkanFunctions and QVulkanDeviceFunctions objects accessible via functions() and deviceFunctions().

Getting a Native Vulkan Surface for a Window

The two common windowing system specific operations are getting a surface (a VkSurfaceKHR handle) for a window, and querying if a given queue family supports presenting to a given surface. To avoid WSI-specific bits in the applications, these are abstracted by QVulkanInstance and the underlying QPA layers.

To create a Vulkan surface for a window, or retrieve an existing one, call surfaceForWindow(). Most platforms will only create the surface via VK_KHR_*_surface when first calling surfaceForWindow(), but there may be platform-specific variations in the internal behavior. Once created, subsequent calls to surfaceForWindow() just return the same handle. This fits the structure of typical Vulkan-enabled QWindow subclasses well.

To query if a given queue family within a physical device can be used to perform presentation to a given surface, call supportsPresent(). This encapsulates both the generic vkGetPhysicalDeviceSurfaceSupportKHR and the WSI-specific vkGetPhysicalDevice*PresentationSupportKHR checks.

Troubleshooting

Besides returning false from create() or 0 from surfaceForWindow(), critical errors will also get printed to the debug output via qWarning(). Additional logging can be requested by enabling debug output for the logging category qt.vulkan. The actual Vulkan error code from instance creation can be retrieved by calling errorCode() after a failing create().

In some special cases it may be necessary to override the Vulkan library name. This can be achieved by setting the QT_VULKAN_LIB environment variable.

Example

The following is the basic outline of creating a Vulkan-capable QWindow:

     class VulkanWindow : public QWindow
     {
     public:
         VulkanWindow() {
             setSurfaceType(VulkanSurface);
         }

         void exposeEvent(QExposeEvent *) {
             if (isExposed()) {
                 if (!m_initialized) {
                     m_initialized = true;
                     // initialize device, swapchain, etc.
                     QVulkanInstance *inst = vulkanInstance();
                     QVulkanFunctions *f = inst->functions();
                     uint32_t devCount = 0;
                     f->vkEnumeratePhysicalDevices(inst->vkInstance(), &devCount, nullptr);
                     ...
                     // build the first frame
                     render();
                 }
             }
         }

         bool event(QEvent *e) {
             if (e->type() == QEvent::UpdateRequest)
                 render();
             return QWindow::event(e);
         }

         void render() {
            ...
            requestUpdate(); // render continuously
         }

     private:
         bool m_initialized = false;
     };

     int main(int argc, char **argv)
     {
         QGuiApplication app(argc, argv);

         QVulkanInstance inst;
         if (!inst.create()) {
             qWarning("Vulkan not available");
             return 1;
         }

         VulkanWindow window;
         window.showMaximized();

         return app.exec();

     }

Using C++ Bindings for Vulkan

Combining Qt's Vulkan enablers with a C++ Vulkan wrapper, for example Vulkan-Hpp, is possible as well. The pre-requisite here is that the C++ layer must be able to adopt native handles (VkInstance, VkSurfaceKHR) in its classes without taking ownership (since the ownership stays with QVulkanInstance and QWindow). Consider also the following:

• Some wrappers require exception support to be enabled. Qt does not use exceptions. To enable exceptions for the application, add CONFIG += exceptions to the .pro file.
• Some wrappers call Vulkan functions directly, assuming vulkan.h provides prototypes and the application links to a Vulkan library exporting all necessary symbols. Qt may not directly link to a Vulkan library. Therefore, on some platforms it may be necessary to add LIBS += -lvulkan or similar in the application's .pro file.
• The headers for the QVulkan classes may include vulkan.h with VK_NO_PROTOTYPES enabled. This can cause issues in C++ wrapper headers that rely on the prototypes. Hence in application code it may be necessary to include vulkan.hpp or similar before any of the QVulkan headers.