syncthing/gui/lang/lang-zh-TW.json
2014-10-12 14:09:40 +02:00

140 lines
11 KiB
JSON

{
"API Key": "API 金鑰",
"About": "關於",
"Add Device": "增加裝置",
"Add Folder": "增加資料夾",
"Address": "位址",
"Addresses": "位址",
"Allow Anonymous Usage Reporting?": "允許匿名的使用資訊回報?",
"Anonymous Usage Reporting": "匿名的使用資訊回報",
"Any devices configured on an introducer device will be added to this device as well.": "任何在引入者裝置所設置的裝置將會一併新增至此裝置",
"Bugs": "程式錯誤",
"CPU Utilization": "CPU 使用率",
"Close": "關閉",
"Comment, when used at the start of a line": "註解,當輸入在一行的開頭時",
"Compression is recommended in most setups.": "建議在大多數的設置中使用壓縮。",
"Connection Error": "連線錯誤",
"Copyright © 2014 Jakob Borg and the following Contributors:": "版權所有 © 2014 Jakob Borg 及以下貢獻者:",
"Delete": "刪除",
"Device ID": "裝置識別碼",
"Device Identification": "裝置識別",
"Device Name": "裝置名稱",
"Disconnected": "斷線",
"Documentation": "說明文件",
"Download Rate": "下載速率",
"Edit": "編輯",
"Edit Device": "編輯裝置",
"Edit Folder": "編輯資料夾",
"Editing": "正在編輯",
"Enable UPnP": "啟用 UPnP",
"Enter comma separated \"ip:port\" addresses or \"dynamic\" to perform automatic discovery of the address.": "輸入以半形逗號區隔的 \"ip:連接埠\" 位址,或著輸入 \"dynamic\" 以進行位址的自動探索",
"Enter ignore patterns, one per line.": "輸入忽略樣式,每行一種。",
"Error": "錯誤",
"File Versioning": "檔案版本控制",
"File permission bits are ignored when looking for changes. Use on FAT filesystems.": "當在尋找變化時,檔案權限位元會被忽略。用於 FAT 檔案系統。",
"Files are moved to date stamped versions in a .stversions folder when replaced or deleted by syncthing.": "當檔案被 syncthing 取代或刪除時,它們將被移至 .stversions 資料夾並添加日期戳記。",
"Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "其他裝置做的改變不會影響到此裝置的檔案,但在此裝置上的變化將被發送到叢集中的其他部分。",
"Folder ID": "資料夾識別碼",
"Folder Master": "主資料夾",
"Folder Path": "資料夾路徑",
"GUI Authentication Password": "GUI 認證密碼",
"GUI Authentication User": "GUI 認證使用者名稱",
"GUI Listen Addresses": "GUI 監聽位址",
"Generate": "產生",
"Global Discovery": "全域探索",
"Global Discovery Server": "全域探索伺服器",
"Global State": "全域狀態",
"Idle": "閒置",
"Ignore Patterns": "忽略樣式",
"Ignore Permissions": "忽略權限",
"Incoming Rate Limit (KiB/s)": "連入速率限制 (KiB/s)",
"Introducer": "引入者",
"Inversion of the given condition (i.e. do not exclude)": "反轉給定條件 (即:不要排除)",
"Keep Versions": "保留歷史版本數",
"Last seen": "最後發現時間",
"Latest Release": "最新發佈",
"Local Discovery": "本地探索",
"Local State": "本地狀態",
"Maximum Age": "最長保留時間",
"Multi level wildcard (matches multiple directory levels)": "多階層萬用字元 (可比對多層資料夾)",
"Never": "從未",
"No": "否",
"No File Versioning": "無檔案版本控制",
"Notice": "注意",
"OK": "確定",
"Offline": "離線",
"Online": "上線",
"Out Of Sync": "不同步",
"Outgoing Rate Limit (KiB/s)": "連出速率限制 (KiB/s)",
"Override Changes": "置換改變",
"Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "資料夾在本地電腦的路徑。若資料夾不存在則會建立。波浪符號 (~) 可用作下列資料夾的捷徑:",
"Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "儲存歷史版本的路徑 (若為空,則預設使用資料夾中的 .stversions 資料夾)。",
"Please wait": "請稍後",
"Preview": "預覽",
"Preview Usage Report": "預覽使用資訊報告",
"Quick guide to supported patterns": "可支援樣式的快速指南",
"RAM Utilization": "記憶體使用率",
"Rescan": "重新掃描",
"Rescan Interval": "重新掃描間隔",
"Restart": "重新啟動",
"Restart Needed": "需要重新啟動",
"Restarting": "正在重新啟動",
"Save": "儲存",
"Scanning": "正在掃描",
"Select the devices to share this folder with.": "選擇要共享這個資料夾的裝置。",
"Settings": "設定",
"Share With Devices": "與這些裝置共享",
"Shared With": "與誰共享",
"Short identifier for the folder. Must be the same on all cluster devices.": "資料夾的簡短識別字。必須在叢集內所有的裝置上皆相同。",
"Show ID": "顯示識別碼",
"Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.": "代替裝置識別碼顯示在叢集狀態中。這段文字將會廣播到其他的裝置作為一個可選的預設名稱。",
"Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.": "代替裝置識別碼顯示在叢集狀態中。本欄若未填寫則將被更新為此裝置所廣播的名稱。",
"Shutdown": "關閉",
"Simple File Versioning": "簡單檔案版本控制",
"Single level wildcard (matches within a directory only)": "單階層萬用字元 (只在單個資料夾階層內比對)",
"Source Code": "原始碼",
"Staggered File Versioning": "變動式檔案版本控制",
"Start Browser": "啟動瀏覽器",
"Stopped": "已停止",
"Support / Forum": "支援 / 論壇",
"Sync Protocol Listen Addresses": "同步通訊協定監聽位址",
"Synchronization": "同步作業",
"Syncing": "正在同步",
"Syncthing has been shut down.": "Syncthing 已經關閉。",
"Syncthing includes the following software or portions thereof:": "Syncthing 包括以下軟體或其中的一部分:",
"Syncthing is restarting.": "Syncthing 正在重新啟動。",
"Syncthing is upgrading.": "Syncthing 正在進行升級。",
"Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Syncthing 似乎下線了,或者您的網際網路連線出現問題。正在重試...",
"The aggregated statistics are publicly available at {%url%}.": "匯總統計資訊公佈於 {{url}}。",
"The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "組態已經儲存但尚未啟用。Syncthing 必須重新啟動以便啟用新的組態。",
"The device ID cannot be blank.": "裝置識別碼不能為空白。",
"The device ID to enter here can be found in the \"Edit > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "要輸入在這裡的裝置識別碼可以在其他裝置的 \"編輯 > 顯示識別碼\" 對話框找到。空白以及連接符號可不輸入 (省略)",
"The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "經過加密的使用資訊報告會每天傳送。報告是用來追蹤常用的平台、資料夾的大小以及應用程式的版本。若傳送的資料集有異動,您會再次看到這個對話框。",
"The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "輸入的裝置識別碼似乎無效。它應該為一串包含半形英文字母及數字,並可能會含有空白或連接符號的字串,且長度為 52 或 56 個字元。",
"The folder ID cannot be blank.": "資料夾識別碼不能為空白。",
"The folder ID must be a short identifier (64 characters or less) consisting of letters, numbers and the dot (.), dash (-) and underscode (_) characters only.": "資料夾識別碼必須為一段只包含半形英文字母、數字、點 (.)、連接符號 (-) 以及底線 (_) 的簡短識別碼 (不多於 64 個字元)",
"The folder ID must be unique.": "資料夾識別碼必須為獨一無二的。",
"The folder path cannot be blank.": "資料夾路徑不能空白。",
"The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "使用下列的間隔:在第一個小時內每 30 秒保留一個版本,在第一天內每小時保留一個版本,在第 30 天內每一天保留一個版本,在達到最長保留時間前每一星期保留一個版本。",
"The maximum age must be a number and cannot be blank.": "最長保留時間最大必須為一個數字且不得為空。",
"The maximum time to keep a version (in days, set to 0 to keep versions forever).": "一個版本被保留的最長時間 (單位為天,若設定為 0 則表示永遠保留)。",
"The number of old versions to keep, per file.": "每個檔案要保留的舊版本數量。",
"The number of versions must be a number and cannot be blank.": "每個檔案要保留的舊版本數量必須是數字且不能為空白。",
"The rescan interval must be at least 5 seconds.": "重新掃描間隔至少須為 5 秒。",
"Unknown": "未知",
"Up to Date": "最新",
"Upgrade To {%version%}": "升級至 {{version}}",
"Upgrading": "正在升級",
"Upload Rate": "上載速率",
"Use Compression": "使用壓縮",
"Use HTTPS for GUI": "為 GUI 使用 HTTPS",
"Version": "版本",
"Versions Path": "歷史版本路徑",
"Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "當檔案歷史版本的存留時間大於設定的最大值,或是其數量在一段時間內超出允許值時,則會被刪除。",
"When adding a new device, keep in mind that this device must be added on the other side too.": "當新增一個裝置時,請記住,這個裝置也必須被添加至另一邊。",
"When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "當新增一個資料夾時,請記住,資料夾識別碼是用來將裝置之間的資料夾綁定在一起的。它們有區分大小寫,且必須在所有裝置之間完全相同。",
"Yes": "是",
"You must keep at least one version.": "您必須保留至少一個版本。",
"full documentation": "完整說明文件",
"items": "個項目"
}