// Copyright (C) 2015 The Syncthing Authors. // // This Source Code Form is subject to the terms of the Mozilla Public // License, v. 2.0. If a copy of the MPL was not distributed with this file, // You can obtain one at https://mozilla.org/MPL/2.0/. //go:generate -command counterfeiter go run github.com/maxbrunsfeld/counterfeiter/v6 //go:generate counterfeiter -o mocks/service.go --fake-name Service . Service package connections import ( "context" "crypto/tls" "crypto/x509" "errors" "fmt" "math" "net" "net/url" "sort" "strings" stdsync "sync" "time" "github.com/syncthing/syncthing/lib/config" "github.com/syncthing/syncthing/lib/connections/registry" "github.com/syncthing/syncthing/lib/discover" "github.com/syncthing/syncthing/lib/events" "github.com/syncthing/syncthing/lib/nat" "github.com/syncthing/syncthing/lib/osutil" "github.com/syncthing/syncthing/lib/protocol" "github.com/syncthing/syncthing/lib/svcutil" "github.com/syncthing/syncthing/lib/sync" "github.com/syncthing/syncthing/lib/util" // Registers NAT service providers _ "github.com/syncthing/syncthing/lib/pmp" _ "github.com/syncthing/syncthing/lib/upnp" "github.com/thejerf/suture/v4" "golang.org/x/time/rate" ) var ( dialers = make(map[string]dialerFactory) listeners = make(map[string]listenerFactory) ) var ( // Dialers and listeners return errUnsupported (or a wrapped variant) // when they are intentionally out of service due to configuration, // build, etc. This is not logged loudly. errUnsupported = errors.New("unsupported protocol") // These are specific explanations for errUnsupported. errDisabled = fmt.Errorf("%w: disabled by configuration", errUnsupported) errDeprecated = fmt.Errorf("%w: deprecated", errUnsupported) // Various reasons to reject a connection errNetworkNotAllowed = errors.New("network not allowed") errDeviceAlreadyConnected = errors.New("already connected to this device") errDeviceIgnored = errors.New("device is ignored") errConnLimitReached = errors.New("connection limit reached") errDevicePaused = errors.New("device is paused") ) const ( perDeviceWarningIntv = 15 * time.Minute tlsHandshakeTimeout = 10 * time.Second minConnectionReplaceAge = 10 * time.Second minConnectionLoopSleep = 5 * time.Second stdConnectionLoopSleep = time.Minute worstDialerPriority = math.MaxInt32 recentlySeenCutoff = 7 * 24 * time.Hour shortLivedConnectionThreshold = 5 * time.Second dialMaxParallel = 64 dialMaxParallelPerDevice = 8 ) // From go/src/crypto/tls/cipher_suites.go var tlsCipherSuiteNames = map[uint16]string{ // TLS 1.2 0x0005: "TLS_RSA_WITH_RC4_128_SHA", 0x000a: "TLS_RSA_WITH_3DES_EDE_CBC_SHA", 0x002f: "TLS_RSA_WITH_AES_128_CBC_SHA", 0x0035: "TLS_RSA_WITH_AES_256_CBC_SHA", 0x003c: "TLS_RSA_WITH_AES_128_CBC_SHA256", 0x009c: "TLS_RSA_WITH_AES_128_GCM_SHA256", 0x009d: "TLS_RSA_WITH_AES_256_GCM_SHA384", 0xc007: "TLS_ECDHE_ECDSA_WITH_RC4_128_SHA", 0xc009: "TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA", 0xc00a: "TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA", 0xc011: "TLS_ECDHE_RSA_WITH_RC4_128_SHA", 0xc012: "TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA", 0xc013: "TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA", 0xc014: "TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA", 0xc023: "TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256", 0xc027: "TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256", 0xc02f: "TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256", 0xc02b: "TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256", 0xc030: "TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384", 0xc02c: "TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384", 0xcca8: "TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305", 0xcca9: "TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305", // TLS 1.3 0x1301: "TLS_AES_128_GCM_SHA256", 0x1302: "TLS_AES_256_GCM_SHA384", 0x1303: "TLS_CHACHA20_POLY1305_SHA256", } var tlsVersionNames = map[uint16]string{ tls.VersionTLS12: "TLS1.2", tls.VersionTLS13: "TLS1.3", } // Service listens and dials all configured unconnected devices, via supported // dialers. Successful connections are handed to the model. type Service interface { suture.Service discover.AddressLister ListenerStatus() map[string]ListenerStatusEntry ConnectionStatus() map[string]ConnectionStatusEntry NATType() string } type ListenerStatusEntry struct { Error *string `json:"error"` LANAddresses []string `json:"lanAddresses"` WANAddresses []string `json:"wanAddresses"` } type ConnectionStatusEntry struct { When time.Time `json:"when"` Error *string `json:"error"` } type connWithHello struct { c internalConn hello protocol.Hello err error remoteID protocol.DeviceID remoteCert *x509.Certificate } type service struct { *suture.Supervisor connectionStatusHandler cfg config.Wrapper myID protocol.DeviceID model Model tlsCfg *tls.Config discoverer discover.Finder conns chan internalConn hellos chan *connWithHello bepProtocolName string tlsDefaultCommonName string limiter *limiter natService *nat.Service evLogger events.Logger registry *registry.Registry dialNow chan struct{} dialNowDevices map[protocol.DeviceID]struct{} dialNowDevicesMut sync.Mutex listenersMut sync.RWMutex listeners map[string]genericListener listenerTokens map[string]suture.ServiceToken } func NewService(cfg config.Wrapper, myID protocol.DeviceID, mdl Model, tlsCfg *tls.Config, discoverer discover.Finder, bepProtocolName string, tlsDefaultCommonName string, evLogger events.Logger, registry *registry.Registry) Service { spec := svcutil.SpecWithInfoLogger(l) service := &service{ Supervisor: suture.New("connections.Service", spec), connectionStatusHandler: newConnectionStatusHandler(), cfg: cfg, myID: myID, model: mdl, tlsCfg: tlsCfg, discoverer: discoverer, conns: make(chan internalConn), hellos: make(chan *connWithHello), bepProtocolName: bepProtocolName, tlsDefaultCommonName: tlsDefaultCommonName, limiter: newLimiter(myID, cfg), natService: nat.NewService(myID, cfg), evLogger: evLogger, registry: registry, dialNowDevicesMut: sync.NewMutex(), dialNow: make(chan struct{}, 1), dialNowDevices: make(map[protocol.DeviceID]struct{}), listenersMut: sync.NewRWMutex(), listeners: make(map[string]genericListener), listenerTokens: make(map[string]suture.ServiceToken), } cfg.Subscribe(service) raw := cfg.RawCopy() // Actually starts the listeners and NAT service // Need to start this before service.connect so that any dials that // try punch through already have a listener to cling on. service.CommitConfiguration(raw, raw) // There are several moving parts here; one routine per listening address // (handled in configuration changing) to handle incoming connections, // one routine to periodically attempt outgoing connections, one routine to // the common handling regardless of whether the connection was // incoming or outgoing. service.Add(svcutil.AsService(service.connect, fmt.Sprintf("%s/connect", service))) service.Add(svcutil.AsService(service.handleConns, fmt.Sprintf("%s/handleConns", service))) service.Add(svcutil.AsService(service.handleHellos, fmt.Sprintf("%s/handleHellos", service))) service.Add(service.natService) svcutil.OnSupervisorDone(service.Supervisor, func() { service.cfg.Unsubscribe(service.limiter) service.cfg.Unsubscribe(service) }) return service } func (s *service) handleConns(ctx context.Context) error { for { var c internalConn select { case <-ctx.Done(): return ctx.Err() case c = <-s.conns: } cs := c.ConnectionState() // We should have negotiated the next level protocol "bep/1.0" as part // of the TLS handshake. Unfortunately this can't be a hard error, // because there are implementations out there that don't support // protocol negotiation (iOS for one...). if cs.NegotiatedProtocol != s.bepProtocolName { l.Infof("Peer at %s did not negotiate bep/1.0", c) } // We should have received exactly one certificate from the other // side. If we didn't, they don't have a device ID and we drop the // connection. certs := cs.PeerCertificates if cl := len(certs); cl != 1 { l.Infof("Got peer certificate list of length %d != 1 from peer at %s; protocol error", cl, c) c.Close() continue } remoteCert := certs[0] remoteID := protocol.NewDeviceID(remoteCert.Raw) // The device ID should not be that of ourselves. It can happen // though, especially in the presence of NAT hairpinning, multiple // clients between the same NAT gateway, and global discovery. if remoteID == s.myID { l.Debugf("Connected to myself (%s) at %s", remoteID, c) c.Close() continue } if err := s.connectionCheckEarly(remoteID, c); err != nil { l.Infof("Connection from %s at %s (%s) rejected: %v", remoteID, c.RemoteAddr(), c.Type(), err) c.Close() continue } _ = c.SetDeadline(time.Now().Add(20 * time.Second)) go func() { hello, err := protocol.ExchangeHello(c, s.model.GetHello(remoteID)) select { case s.hellos <- &connWithHello{c, hello, err, remoteID, remoteCert}: case <-ctx.Done(): } }() } } func (s *service) connectionCheckEarly(remoteID protocol.DeviceID, c internalConn) error { if s.cfg.IgnoredDevice(remoteID) { return errDeviceIgnored } if max := s.cfg.Options().ConnectionLimitMax; max > 0 && s.model.NumConnections() >= max { // We're not allowed to accept any more connections. return errConnLimitReached } cfg, ok := s.cfg.Device(remoteID) if !ok { // We do go ahead exchanging hello messages to get information about the device. return nil } if cfg.Paused { return errDevicePaused } if len(cfg.AllowedNetworks) > 0 && !IsAllowedNetwork(c.RemoteAddr().String(), cfg.AllowedNetworks) { // The connection is not from an allowed network. return errNetworkNotAllowed } // Lower priority is better, just like nice etc. if ct, ok := s.model.Connection(remoteID); ok { if ct.Priority() > c.priority || time.Since(ct.Statistics().StartedAt) > minConnectionReplaceAge { l.Debugf("Switching connections %s (existing: %s new: %s)", remoteID, ct, c) } else { // We should not already be connected to the other party. TODO: This // could use some better handling. If the old connection is dead but // hasn't timed out yet we may want to drop *that* connection and keep // this one. But in case we are two devices connecting to each other // in parallel we don't want to do that or we end up with no // connections still established... return errDeviceAlreadyConnected } } return nil } func (s *service) handleHellos(ctx context.Context) error { var c internalConn var hello protocol.Hello var err error var remoteID protocol.DeviceID var remoteCert *x509.Certificate for { select { case <-ctx.Done(): return ctx.Err() case withHello := <-s.hellos: c = withHello.c hello = withHello.hello err = withHello.err remoteID = withHello.remoteID remoteCert = withHello.remoteCert } if err != nil { if protocol.IsVersionMismatch(err) { // The error will be a relatively user friendly description // of what's wrong with the version compatibility. By // default identify the other side by device ID and IP. remote := fmt.Sprintf("%v (%v)", remoteID, c.RemoteAddr()) if hello.DeviceName != "" { // If the name was set in the hello return, use that to // give the user more info about which device is the // affected one. It probably says more than the remote // IP. remote = fmt.Sprintf("%q (%s %s, %v)", hello.DeviceName, hello.ClientName, hello.ClientVersion, remoteID) } msg := fmt.Sprintf("Connecting to %s: %s", remote, err) warningFor(remoteID, msg) } else { // It's something else - connection reset or whatever l.Infof("Failed to exchange Hello messages with %s at %s: %s", remoteID, c, err) } c.Close() continue } _ = c.SetDeadline(time.Time{}) // The Model will return an error for devices that we don't want to // have a connection with for whatever reason, for example unknown devices. if err := s.model.OnHello(remoteID, c.RemoteAddr(), hello); err != nil { l.Infof("Connection from %s at %s (%s) rejected: %v", remoteID, c.RemoteAddr(), c.Type(), err) c.Close() continue } deviceCfg, ok := s.cfg.Device(remoteID) if !ok { l.Infof("Device %s removed from config during connection attempt at %s", remoteID, c) c.Close() continue } // Verify the name on the certificate. By default we set it to // "syncthing" when generating, but the user may have replaced // the certificate and used another name. certName := deviceCfg.CertName if certName == "" { certName = s.tlsDefaultCommonName } if remoteCert.Subject.CommonName == certName { // All good. We do this check because our old style certificates // have "syncthing" in the CommonName field and no SANs, which // is not accepted by VerifyHostname() any more as of Go 1.15. } else if err := remoteCert.VerifyHostname(certName); err != nil { // Incorrect certificate name is something the user most // likely wants to know about, since it's an advanced // config. Warn instead of Info. l.Warnf("Bad certificate from %s at %s: %v", remoteID, c, err) c.Close() continue } // Determine only once whether a connection is considered local // according to our configuration, then cache the decision. c.isLocal = s.isLAN(c.RemoteAddr()) // Wrap the connection in rate limiters. The limiter itself will // keep up with config changes to the rate and whether or not LAN // connections are limited. rd, wr := s.limiter.getLimiters(remoteID, c, c.IsLocal()) protoConn := protocol.NewConnection(remoteID, rd, wr, c, s.model, c, deviceCfg.Compression, s.cfg.FolderPasswords(remoteID)) go func() { <-protoConn.Closed() s.dialNowDevicesMut.Lock() s.dialNowDevices[remoteID] = struct{}{} s.scheduleDialNow() s.dialNowDevicesMut.Unlock() }() l.Infof("Established secure connection to %s at %s", remoteID, c) s.model.AddConnection(protoConn, hello) continue } } func (s *service) connect(ctx context.Context) error { // Map of when to earliest dial each given device + address again nextDialAt := make(nextDialRegistry) // Used as delay for the first few connection attempts (adjusted up to // minConnectionLoopSleep), increased exponentially until it reaches // stdConnectionLoopSleep, at which time the normal sleep mechanism // kicks in. initialRampup := time.Second for { cfg := s.cfg.RawCopy() bestDialerPriority := s.bestDialerPriority(cfg) isInitialRampup := initialRampup < stdConnectionLoopSleep l.Debugln("Connection loop") if isInitialRampup { l.Debugln("Connection loop in initial rampup") } // Used for consistency throughout this loop run, as time passes // while we try connections etc. now := time.Now() // Attempt to dial all devices that are unconnected or can be connection-upgraded s.dialDevices(ctx, now, cfg, bestDialerPriority, nextDialAt, isInitialRampup) var sleep time.Duration if isInitialRampup { // We are in the initial rampup time, so we slowly, statically // increase the sleep time. sleep = initialRampup initialRampup *= 2 } else { // The sleep time is until the next dial scheduled in nextDialAt, // clamped by stdConnectionLoopSleep as we don't want to sleep too // long (config changes might happen). sleep = nextDialAt.sleepDurationAndCleanup(now) } // ... while making sure not to loop too quickly either. if sleep < minConnectionLoopSleep { sleep = minConnectionLoopSleep } l.Debugln("Next connection loop in", sleep) timeout := time.NewTimer(sleep) select { case <-s.dialNow: // Remove affected devices from nextDialAt to dial immediately, // regardless of when we last dialed it (there's cool down in the // registry for too many repeat dials). s.dialNowDevicesMut.Lock() for device := range s.dialNowDevices { nextDialAt.redialDevice(device, now) } s.dialNowDevices = make(map[protocol.DeviceID]struct{}) s.dialNowDevicesMut.Unlock() timeout.Stop() case <-timeout.C: case <-ctx.Done(): return ctx.Err() } } } func (*service) bestDialerPriority(cfg config.Configuration) int { bestDialerPriority := worstDialerPriority for _, df := range dialers { if df.Valid(cfg) != nil { continue } if prio := df.Priority(); prio < bestDialerPriority { bestDialerPriority = prio } } return bestDialerPriority } func (s *service) dialDevices(ctx context.Context, now time.Time, cfg config.Configuration, bestDialerPriority int, nextDialAt nextDialRegistry, initial bool) { // Figure out current connection limits up front to see if there's any // point in resolving devices and such at all. allowAdditional := 0 // no limit connectionLimit := cfg.Options.LowestConnectionLimit() if connectionLimit > 0 { current := s.model.NumConnections() allowAdditional = connectionLimit - current if allowAdditional <= 0 { l.Debugf("Skipping dial because we've reached the connection limit, current %d >= limit %d", current, connectionLimit) return } } // Get device statistics for the last seen time of each device. This // isn't critical, so ignore the potential error. stats, _ := s.model.DeviceStatistics() queue := make(dialQueue, 0, len(cfg.Devices)) for _, deviceCfg := range cfg.Devices { // Don't attempt to connect to ourselves... if deviceCfg.DeviceID == s.myID { continue } // Don't attempt to connect to paused devices... if deviceCfg.Paused { continue } // See if we are already connected and, if so, what our cutoff is // for dialer priority. priorityCutoff := worstDialerPriority connection, connected := s.model.Connection(deviceCfg.DeviceID) if connected { priorityCutoff = connection.Priority() if bestDialerPriority >= priorityCutoff { // Our best dialer is not any better than what we already // have, so nothing to do here. continue } } dialTargets := s.resolveDialTargets(ctx, now, cfg, deviceCfg, nextDialAt, initial, priorityCutoff) if len(dialTargets) > 0 { queue = append(queue, dialQueueEntry{ id: deviceCfg.DeviceID, lastSeen: stats[deviceCfg.DeviceID].LastSeen, shortLived: stats[deviceCfg.DeviceID].LastConnectionDurationS < shortLivedConnectionThreshold.Seconds(), targets: dialTargets, }) } } // Sort the queue in an order we think will be useful (most recent // first, deprioriting unstable devices, randomizing those we haven't // seen in a long while). If we don't do connection limiting the sorting // doesn't have much effect, but it may result in getting up and running // quicker if only a subset of configured devices are actually reachable // (by prioritizing those that were reachable recently). queue.Sort() // Perform dials according to the queue, stopping when we've reached the // allowed additional number of connections (if limited). numConns := 0 var numConnsMut stdsync.Mutex dialSemaphore := util.NewSemaphore(dialMaxParallel) dialWG := new(stdsync.WaitGroup) dialCtx, dialCancel := context.WithCancel(ctx) defer func() { dialWG.Wait() dialCancel() }() for i := range queue { select { case <-dialCtx.Done(): return default: } dialWG.Add(1) go func(entry dialQueueEntry) { defer dialWG.Done() conn, ok := s.dialParallel(dialCtx, entry.id, entry.targets, dialSemaphore) if !ok { return } numConnsMut.Lock() if allowAdditional == 0 || numConns < allowAdditional { select { case s.conns <- conn: numConns++ if allowAdditional > 0 && numConns >= allowAdditional { dialCancel() } case <-dialCtx.Done(): } } numConnsMut.Unlock() }(queue[i]) } } func (s *service) resolveDialTargets(ctx context.Context, now time.Time, cfg config.Configuration, deviceCfg config.DeviceConfiguration, nextDialAt nextDialRegistry, initial bool, priorityCutoff int) []dialTarget { deviceID := deviceCfg.DeviceID addrs := s.resolveDeviceAddrs(ctx, deviceCfg) l.Debugln("Resolved device", deviceID, "addresses:", addrs) dialTargets := make([]dialTarget, 0, len(addrs)) for _, addr := range addrs { // Use both device and address, as you might have two devices connected // to the same relay if !initial && nextDialAt.get(deviceID, addr).After(now) { l.Debugf("Not dialing %s via %v as it's not time yet", deviceID, addr) continue } // If we fail at any step before actually getting the dialer // retry in a minute nextDialAt.set(deviceID, addr, now.Add(time.Minute)) uri, err := url.Parse(addr) if err != nil { s.setConnectionStatus(addr, err) l.Infof("Parsing dialer address %s: %v", addr, err) continue } if len(deviceCfg.AllowedNetworks) > 0 { if !IsAllowedNetwork(uri.Host, deviceCfg.AllowedNetworks) { s.setConnectionStatus(addr, errors.New("network disallowed")) l.Debugln("Network for", uri, "is disallowed") continue } } dialerFactory, err := getDialerFactory(cfg, uri) if err != nil { s.setConnectionStatus(addr, err) } if errors.Is(err, errUnsupported) { l.Debugf("Dialer for %v: %v", uri, err) continue } else if err != nil { l.Infof("Dialer for %v: %v", uri, err) continue } priority := dialerFactory.Priority() if priority >= priorityCutoff { l.Debugf("Not dialing using %s as priority is not better than current connection (%d >= %d)", dialerFactory, dialerFactory.Priority(), priorityCutoff) continue } dialer := dialerFactory.New(s.cfg.Options(), s.tlsCfg, s.registry) nextDialAt.set(deviceID, addr, now.Add(dialer.RedialFrequency())) // For LAN addresses, increase the priority so that we // try these first. switch { case dialerFactory.AlwaysWAN(): // Do nothing. case s.isLANHost(uri.Host): priority-- } dialTargets = append(dialTargets, dialTarget{ addr: addr, dialer: dialer, priority: priority, deviceID: deviceID, uri: uri, }) } return dialTargets } func (s *service) resolveDeviceAddrs(ctx context.Context, cfg config.DeviceConfiguration) []string { var addrs []string for _, addr := range cfg.Addresses { if addr == "dynamic" { if s.discoverer != nil { if t, err := s.discoverer.Lookup(ctx, cfg.DeviceID); err == nil { addrs = append(addrs, t...) } } } else { addrs = append(addrs, addr) } } return util.UniqueTrimmedStrings(addrs) } func (s *service) isLANHost(host string) bool { // Probably we are called with an ip:port combo which we can resolve as // a TCP address. if addr, err := net.ResolveTCPAddr("tcp", host); err == nil { return s.isLAN(addr) } // ... but this function looks general enough that someone might try // with just an IP as well in the future so lets allow that. if addr, err := net.ResolveIPAddr("ip", host); err == nil { return s.isLAN(addr) } return false } func (s *service) isLAN(addr net.Addr) bool { var ip net.IP switch addr := addr.(type) { case *net.IPAddr: ip = addr.IP case *net.TCPAddr: ip = addr.IP case *net.UDPAddr: ip = addr.IP default: // From the standard library, just Unix sockets. // If you invent your own, handle it. return false } if ip.IsLoopback() { return true } for _, lan := range s.cfg.Options().AlwaysLocalNets { _, ipnet, err := net.ParseCIDR(lan) if err != nil { l.Debugln("Network", lan, "is malformed:", err) continue } if ipnet.Contains(ip) { return true } } lans, _ := osutil.GetLans() for _, lan := range lans { if lan.Contains(ip) { return true } } return false } func (s *service) createListener(factory listenerFactory, uri *url.URL) bool { // must be called with listenerMut held l.Debugln("Starting listener", uri) listener := factory.New(uri, s.cfg, s.tlsCfg, s.conns, s.natService, s.registry) listener.OnAddressesChanged(s.logListenAddressesChangedEvent) // Retrying a listener many times in rapid succession is unlikely to help, // thus back off quickly. A listener may soon be functional again, e.g. due // to a network interface coming back online - retry every minute. spec := svcutil.SpecWithInfoLogger(l) spec.FailureThreshold = 2 spec.FailureBackoff = time.Minute sup := suture.New(fmt.Sprintf("listenerSupervisor@%v", listener), spec) sup.Add(listener) s.listeners[uri.String()] = listener s.listenerTokens[uri.String()] = s.Add(sup) return true } func (s *service) logListenAddressesChangedEvent(l ListenerAddresses) { s.evLogger.Log(events.ListenAddressesChanged, map[string]interface{}{ "address": l.URI, "lan": l.LANAddresses, "wan": l.WANAddresses, }) } func (s *service) CommitConfiguration(from, to config.Configuration) bool { newDevices := make(map[protocol.DeviceID]bool, len(to.Devices)) for _, dev := range to.Devices { newDevices[dev.DeviceID] = true } for _, dev := range from.Devices { if !newDevices[dev.DeviceID] { warningLimitersMut.Lock() delete(warningLimiters, dev.DeviceID) warningLimitersMut.Unlock() } } s.checkAndSignalConnectLoopOnUpdatedDevices(from, to) s.listenersMut.Lock() seen := make(map[string]struct{}) for _, addr := range to.Options.ListenAddresses() { if addr == "" { // We can get an empty address if there is an empty listener // element in the config, indicating no listeners should be // used. This is not an error. continue } uri, err := url.Parse(addr) if err != nil { l.Warnf("Skipping malformed listener URL %q: %v", addr, err) continue } // Make sure we always have the canonical representation of the URL. // This is for consistency as we use it as a map key, but also to // avoid misunderstandings. We do not just use the canonicalized // version, because an URL that looks very similar to a human might // mean something entirely different to the computer (e.g., // tcp:/127.0.0.1:22000 in fact being equivalent to tcp://:22000). if canonical := uri.String(); canonical != addr { l.Warnf("Skipping malformed listener URL %q (not canonical)", addr) continue } if _, ok := s.listeners[addr]; ok { seen[addr] = struct{}{} continue } factory, err := getListenerFactory(to, uri) if errors.Is(err, errUnsupported) { l.Debugf("Listener for %v: %v", uri, err) continue } else if err != nil { l.Infof("Listener for %v: %v", uri, err) continue } s.createListener(factory, uri) seen[addr] = struct{}{} } for addr, listener := range s.listeners { if _, ok := seen[addr]; !ok || listener.Factory().Valid(to) != nil { l.Debugln("Stopping listener", addr) s.Remove(s.listenerTokens[addr]) delete(s.listenerTokens, addr) delete(s.listeners, addr) } } s.listenersMut.Unlock() return true } func (s *service) checkAndSignalConnectLoopOnUpdatedDevices(from, to config.Configuration) { oldDevices := from.DeviceMap() dial := false s.dialNowDevicesMut.Lock() for _, dev := range to.Devices { if dev.Paused { continue } if oldDev, ok := oldDevices[dev.DeviceID]; !ok || oldDev.Paused { s.dialNowDevices[dev.DeviceID] = struct{}{} dial = true } else if !util.EqualStrings(oldDev.Addresses, dev.Addresses) { dial = true } } if dial { s.scheduleDialNow() } s.dialNowDevicesMut.Unlock() } func (s *service) scheduleDialNow() { select { case s.dialNow <- struct{}{}: default: // channel is blocked - a config update is already pending for the connection loop. } } func (s *service) AllAddresses() []string { s.listenersMut.RLock() var addrs []string for _, listener := range s.listeners { for _, lanAddr := range listener.LANAddresses() { addrs = append(addrs, lanAddr.String()) } for _, wanAddr := range listener.WANAddresses() { addrs = append(addrs, wanAddr.String()) } } s.listenersMut.RUnlock() return util.UniqueTrimmedStrings(addrs) } func (s *service) ExternalAddresses() []string { if s.cfg.Options().AnnounceLANAddresses { return s.AllAddresses() } s.listenersMut.RLock() var addrs []string for _, listener := range s.listeners { for _, wanAddr := range listener.WANAddresses() { addrs = append(addrs, wanAddr.String()) } } s.listenersMut.RUnlock() return util.UniqueTrimmedStrings(addrs) } func (s *service) ListenerStatus() map[string]ListenerStatusEntry { result := make(map[string]ListenerStatusEntry) s.listenersMut.RLock() for addr, listener := range s.listeners { var status ListenerStatusEntry if err := listener.Error(); err != nil { errStr := err.Error() status.Error = &errStr } status.LANAddresses = urlsToStrings(listener.LANAddresses()) status.WANAddresses = urlsToStrings(listener.WANAddresses()) result[addr] = status } s.listenersMut.RUnlock() return result } type connectionStatusHandler struct { connectionStatusMut sync.RWMutex connectionStatus map[string]ConnectionStatusEntry // address -> latest error/status } func newConnectionStatusHandler() connectionStatusHandler { return connectionStatusHandler{ connectionStatusMut: sync.NewRWMutex(), connectionStatus: make(map[string]ConnectionStatusEntry), } } func (s *connectionStatusHandler) ConnectionStatus() map[string]ConnectionStatusEntry { result := make(map[string]ConnectionStatusEntry) s.connectionStatusMut.RLock() for k, v := range s.connectionStatus { result[k] = v } s.connectionStatusMut.RUnlock() return result } func (s *connectionStatusHandler) setConnectionStatus(address string, err error) { if errors.Is(err, context.Canceled) { return } status := ConnectionStatusEntry{When: time.Now().UTC().Truncate(time.Second)} if err != nil { errStr := err.Error() status.Error = &errStr } s.connectionStatusMut.Lock() s.connectionStatus[address] = status s.connectionStatusMut.Unlock() } func (s *service) NATType() string { s.listenersMut.RLock() defer s.listenersMut.RUnlock() for _, listener := range s.listeners { natType := listener.NATType() if natType != "unknown" { return natType } } return "unknown" } func getDialerFactory(cfg config.Configuration, uri *url.URL) (dialerFactory, error) { dialerFactory, ok := dialers[uri.Scheme] if !ok { return nil, fmt.Errorf("unknown address scheme %q", uri.Scheme) } if err := dialerFactory.Valid(cfg); err != nil { return nil, err } return dialerFactory, nil } func getListenerFactory(cfg config.Configuration, uri *url.URL) (listenerFactory, error) { listenerFactory, ok := listeners[uri.Scheme] if !ok { return nil, fmt.Errorf("unknown address scheme %q", uri.Scheme) } if err := listenerFactory.Valid(cfg); err != nil { return nil, err } return listenerFactory, nil } func urlsToStrings(urls []*url.URL) []string { strings := make([]string, len(urls)) for i, url := range urls { strings[i] = url.String() } return strings } var warningLimiters = make(map[protocol.DeviceID]*rate.Limiter) var warningLimitersMut = sync.NewMutex() func warningFor(dev protocol.DeviceID, msg string) { warningLimitersMut.Lock() defer warningLimitersMut.Unlock() lim, ok := warningLimiters[dev] if !ok { lim = rate.NewLimiter(rate.Every(perDeviceWarningIntv), 1) warningLimiters[dev] = lim } if lim.Allow() { l.Warnln(msg) } } func tlsTimedHandshake(tc *tls.Conn) error { tc.SetDeadline(time.Now().Add(tlsHandshakeTimeout)) defer tc.SetDeadline(time.Time{}) return tc.Handshake() } // IsAllowedNetwork returns true if the given host (IP or resolvable // hostname) is in the set of allowed networks (CIDR format only). func IsAllowedNetwork(host string, allowed []string) bool { if hostNoPort, _, err := net.SplitHostPort(host); err == nil { host = hostNoPort } addr, err := net.ResolveIPAddr("ip", host) if err != nil { return false } for _, n := range allowed { result := true if strings.HasPrefix(n, "!") { result = false n = n[1:] } _, cidr, err := net.ParseCIDR(n) if err != nil { continue } if cidr.Contains(addr.IP) { return result } } return false } func (s *service) dialParallel(ctx context.Context, deviceID protocol.DeviceID, dialTargets []dialTarget, parentSema *util.Semaphore) (internalConn, bool) { // Group targets into buckets by priority dialTargetBuckets := make(map[int][]dialTarget, len(dialTargets)) for _, tgt := range dialTargets { dialTargetBuckets[tgt.priority] = append(dialTargetBuckets[tgt.priority], tgt) } // Get all available priorities priorities := make([]int, 0, len(dialTargetBuckets)) for prio := range dialTargetBuckets { priorities = append(priorities, prio) } // Sort the priorities so that we dial lowest first (which means highest...) sort.Ints(priorities) sema := util.MultiSemaphore{util.NewSemaphore(dialMaxParallelPerDevice), parentSema} for _, prio := range priorities { tgts := dialTargetBuckets[prio] res := make(chan internalConn, len(tgts)) wg := stdsync.WaitGroup{} for _, tgt := range tgts { sema.Take(1) wg.Add(1) go func(tgt dialTarget) { defer func() { wg.Done() sema.Give(1) }() conn, err := tgt.Dial(ctx) if err == nil { // Closes the connection on error err = s.validateIdentity(conn, deviceID) } s.setConnectionStatus(tgt.addr, err) if err != nil { l.Debugln("dialing", deviceID, tgt.uri, "error:", err) } else { l.Debugln("dialing", deviceID, tgt.uri, "success:", conn) res <- conn } }(tgt) } // Spawn a routine which will unblock main routine in case we fail // to connect to anyone. go func() { wg.Wait() close(res) }() // Wait for the first connection, or for channel closure. if conn, ok := <-res; ok { // Got a connection, means more might come back, hence spawn a // routine that will do the discarding. l.Debugln("connected to", deviceID, prio, "using", conn, conn.priority) go func(deviceID protocol.DeviceID, prio int) { wg.Wait() l.Debugln("discarding", len(res), "connections while connecting to", deviceID, prio) for conn := range res { conn.Close() } }(deviceID, prio) return conn, ok } // Failed to connect, report that fact. l.Debugln("failed to connect to", deviceID, prio) } return internalConn{}, false } func (s *service) validateIdentity(c internalConn, expectedID protocol.DeviceID) error { cs := c.ConnectionState() // We should have received exactly one certificate from the other // side. If we didn't, they don't have a device ID and we drop the // connection. certs := cs.PeerCertificates if cl := len(certs); cl != 1 { l.Infof("Got peer certificate list of length %d != 1 from peer at %s; protocol error", cl, c) c.Close() return fmt.Errorf("expected 1 certificate, got %d", cl) } remoteCert := certs[0] remoteID := protocol.NewDeviceID(remoteCert.Raw) // The device ID should not be that of ourselves. It can happen // though, especially in the presence of NAT hairpinning, multiple // clients between the same NAT gateway, and global discovery. if remoteID == s.myID { l.Debugf("Connected to myself (%s) at %s", remoteID, c) c.Close() return errors.New("connected to self") } // We should see the expected device ID if !remoteID.Equals(expectedID) { c.Close() return fmt.Errorf("unexpected device id, expected %s got %s", expectedID, remoteID) } return nil } type nextDialRegistry map[protocol.DeviceID]nextDialDevice type nextDialDevice struct { nextDial map[string]time.Time coolDownIntervalStart time.Time attempts int } func (r nextDialRegistry) get(device protocol.DeviceID, addr string) time.Time { return r[device].nextDial[addr] } const ( dialCoolDownInterval = 2 * time.Minute dialCoolDownDelay = 5 * time.Minute dialCoolDownMaxAttemps = 3 ) // redialDevice marks the device for immediate redial, unless the remote keeps // dropping established connections. Thus we keep track of when the first forced // re-dial happened, and how many attempts happen in the dialCoolDownInterval // after that. If it's more than dialCoolDownMaxAttempts, don't force-redial // that device for dialCoolDownDelay (regular dials still happen). func (r nextDialRegistry) redialDevice(device protocol.DeviceID, now time.Time) { dev, ok := r[device] if !ok { r[device] = nextDialDevice{ nextDial: make(map[string]time.Time), coolDownIntervalStart: now, attempts: 1, } return } if dev.attempts == 0 || now.Before(dev.coolDownIntervalStart.Add(dialCoolDownInterval)) { if dev.attempts >= dialCoolDownMaxAttemps { // Device has been force redialed too often - let it cool down. return } if dev.attempts == 0 { dev.coolDownIntervalStart = now } dev.attempts++ dev.nextDial = make(map[string]time.Time) return } if dev.attempts >= dialCoolDownMaxAttemps && now.Before(dev.coolDownIntervalStart.Add(dialCoolDownDelay)) { return // Still cooling down } delete(r, device) } func (r nextDialRegistry) set(device protocol.DeviceID, addr string, next time.Time) { if _, ok := r[device]; !ok { r[device] = nextDialDevice{nextDial: make(map[string]time.Time)} } r[device].nextDial[addr] = next } func (r nextDialRegistry) sleepDurationAndCleanup(now time.Time) time.Duration { sleep := stdConnectionLoopSleep for id, dev := range r { for address, next := range dev.nextDial { if next.Before(now) { // Expired entry, address was not seen in last pass(es) delete(dev.nextDial, address) continue } if cur := next.Sub(now); cur < sleep { sleep = cur } } if dev.attempts > 0 { interval := dialCoolDownInterval if dev.attempts >= dialCoolDownMaxAttemps { interval = dialCoolDownDelay } if now.After(dev.coolDownIntervalStart.Add(interval)) { dev.attempts = 0 } } if len(dev.nextDial) == 0 && dev.attempts == 0 { delete(r, id) } } return sleep }