Commit Graph

229 Commits

Author SHA1 Message Date
Jakob Borg
81af29e3e2 lib/config, lib/connections: Configurables for KCP, disable by default
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4030
2017-03-07 12:55:50 +00:00
Audrius Butkevicius
0da0774ce4 lib/connections: Add KCP support (fixes #804)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3489
2017-03-07 12:44:16 +00:00
Simon Frei
416811a2a9 cmd/syncthing, lib/config: Pause/resume all devices whithout argument
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3989
LGTM: AudriusButkevicius, calmh
2017-03-04 07:54:13 +00:00
Jakob Borg
f7fc0c1d3e all: Update license url to https (ref #3976) 2017-02-09 08:04:16 +01:00
Jakob Borg
c4ba580cbb all: Remove symlink support on Windows, SymlinksEnabled config
After this change,

- Symlinks on Windows are always unsupported. Sorry.

- Symlinks are always enabled on other platforms. They are just a small
  file like anything else. There is no need to special case them. If you
  don't want to sync some symlinks, ignore them.

- The protocol doesn't differentiate between different "types" of
  symlinks. If that distinction ever does become relevant the individual
  devices can figure it out by looking at the destination when they
  create the link.

It's backwards compatible in that all the old symlink types are still
understood to be symlinks, and the new SYMLINK type is equivalent to the
old SYMLINK_UNKNOWN which was always a valid way to do it.

GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3962
LGTM: AudriusButkevicius
2017-02-07 08:34:24 +00:00
Audrius Butkevicius
67acef1794 lib/weakhash, lib/model, cmd/syncthing: Decide if to use weakhash on startup (fixes #3938)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3949
2017-02-06 10:27:11 +00:00
Jakob Borg
3eb7a9373a gui, lib/config: Add notification about new release channels
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3945
2017-02-04 09:45:17 +00:00
Jakob Borg
35e87e23fd cmd/syncthing, gui, lib/config, lib/upgrade: Add option to upgrade to pre-releases
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3939
2017-01-27 12:17:06 +00:00
Audrius Butkevicius
29d010ec0e lib/model, lib/weakhash: Hash using adler32, add heuristic in puller
Adler32 is much faster, and the heuristic avoid the obvious cases where it
will not help.

GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3872
2017-01-04 21:04:13 +00:00
Jakob Borg
0a118d2979 lib/config, lib/model: Temporarily disable bad tests (ref #3834, #3843) 2017-01-01 13:27:18 +01:00
Audrius Butkevicius
bab7c8ebbf all: Add folder pause, make pauses permanent (fixes #3407, fixes #215, fixes #3001)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3520
2016-12-21 18:41:25 +00:00
Jakob Borg
d41c131364 build: Enable gometalinter "gosimple" check, improve build.go 2016-12-21 14:53:45 +01:00
AudriusButkevicius
9e0afb7d8a lib/connections: Support setting traffic class (fixes #3790) 2016-12-21 11:01:15 +01:00
Jakob Borg
2f770f8bfb lib/config, lib/protocol: Improve folder description with empty label 2016-12-19 10:12:06 +01:00
Heiko Zuerker
398c356f22 lib/model: Clarify master terminology (fixes #2679)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3793
2016-12-16 22:23:35 +00:00
Audrius Butkevicius
0582836820 lib/model, lib/scanner: Efficient inserts/deletes in the middle of the file
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3527
2016-12-14 23:30:29 +00:00
Jakob Borg
8559e20237 lib/osutil: Don't chmod in atomic file creation (fixes #2472)
Instead, trust (and test) that the temp file has appropriate permissions
from the start. The only place where this changes our behavior is for
ignores which go from 0644 to 0600. I'm OK with that.

GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3756
2016-11-23 14:06:08 +00:00
Roman Zaynetdinov
d3a251e6d9 lib/model: Log folder IDs and labels (fixes #3724)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3741
2016-11-21 20:09:18 +01:00
Unrud
1574b7d834 lib/model: Add fsync of files and directories, option to disable (fixes #3711) 2016-11-21 18:09:51 +01:00
Jakob Borg
a8a0bc356a lib/model: Minor cleanup to not fondle cfg.Raw things in handleDeintroductions
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3739
2016-11-17 08:56:55 +00:00
Audrius Butkevicius
f60b424d70 lib/config: Raw() -> RawCopy() 2016-11-13 09:29:35 +01:00
Audrius Butkevicius
a1a91d5ef4 lib/model: Introducer can remove stuff it introduced (fixes #1015)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3522
2016-11-13 09:29:33 +01:00
Jakob Borg
59f3d1445f Revert "lib/model: Introducer can remove stuff it introduced (fixes #1015)"
This reverts commit 0b88cf1d03.
2016-11-12 08:38:29 +01:00
Audrius Butkevicius
0b88cf1d03 lib/model: Introducer can remove stuff it introduced (fixes #1015)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3522
2016-11-11 15:54:25 +01:00
Audrius Butkevicius
56e2ba29d0 lib/config: Subscribers get a copy of the config
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3722
2016-11-11 14:52:23 +00:00
Jakob Borg
3f9b75b7b3 Revert "lib/model: Introducer can remove stuff it introduced (fixes #1015)"
This reverts commit ec2b097313.
2016-11-08 14:27:32 +08:00
Audrius Butkevicius
ec2b097313 lib/model: Introducer can remove stuff it introduced (fixes #1015)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3522
2016-11-08 00:40:48 +08:00
Jakob Borg
467c1b26fb cmd/syncthing, lib/config: Log errors replacing or saving config (ref #3567) 2016-09-24 09:59:09 +02:00
Jakob Borg
139e9b144e lib/config: Fix tests for changes in previous commit 2016-09-13 22:20:22 +02:00
Jakob Borg
7fb53ec954 lib/config: Correct name of discovery-v6-4 server 2016-09-12 11:30:06 +02:00
Jakob Borg
d8b5070ca8 lib/config: Update default set of discovery servers 2016-09-12 09:55:45 +02:00
Jakob Borg
49910a1d85 lib/config, cmd/syncthing: Enforce localhost only connections
When the GUI/API is bound to localhost, we enforce that the Host header
looks like localhost. This can be disabled by setting
insecureSkipHostCheck in the GUI config.

GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3558
2016-09-03 08:33:34 +00:00
Audrius Butkevicius
af3b6f9c83 lib/model, lib/config: Support "live" device removal, folder unsharing and folder configuration changes
Furthermore:
1. Cleans configs received, migrates them as we receive them.
2. Clears indexes of devices we no longer share the folder with

GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3478
2016-08-07 16:21:59 +00:00
Jakob Borg
f368d2278f lib/config, lib/connections: Refactor handling of ignored devices (fixes #3470)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3471
2016-08-05 09:29:49 +00:00
Jakob Borg
1eb6db6ca8 cmd/syncthing, lib/...: Correctly handle ignores & invalid file names (fixes #3012, fixes #3457, fixes #3458)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3464
2016-08-05 07:13:52 +00:00
Jakob Borg
ffe7a2fcd7 cmd/syncthing, lib/config: Enable HTTP CPU/heap profile collection for users
This adds a config to enable debug functions on the API server, which is
by default disabled. When enabled, the /rest/debug things become
available and become available without requiring a CSRF token (although
authentication is required if configured).

We also add a new endpoint /rest/debug/cpuprof?duration=15s (with the
duration being configurable, defaulting to 30s). This runs a CPU profile
for the duration and returns it as a file. It sets headers so that a
browser will save the file with an informative name.

The same is done for heap profiles, /rest/debug/heapprof, which does not
take any parameters.

The purpose of this is that any user can enable debugging under
advanced, then point their browser to the endpoint above and get a file
that contains a CPU or heap profile we can use, with the filename
telling us what version and architecture the profile is from.

On the command line, this becomes

    curl -O -J http://localhost:8082/rest/debug/cpuprof?duration=5s
    curl: Saved to filename
    'syncthing-cpu-darwin-amd64-v0.14.3+4-g935bcc0-110307.pprof'

GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3467
2016-08-02 11:06:45 +00:00
Audrius Butkevicius
08b5a7908f gui: Add one-off notifications that need to be acked
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3254
2016-08-02 08:07:30 +00:00
Jakob Borg
3176629410 cmd, lib: Fix ineffectual assignments (ineffasign) and comment spelling
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3405
2016-07-15 14:23:20 +00:00
Jakob Borg
44d30c83bf lib/config, cmd/syncthing: Handle committing configuration better (fixes #3077)
This slightly changes the interface used for committing configuration
changes. The two parts are now:

 - VerifyConfiguration, which runs synchronously and locked, and can
   abort the config change. These callbacks shouldn't *do* anything
   apart from looking at the config changes and saying yes or no. No
   change from previously.

 - CommitConfiguration, which runs asynchronously (one goroutine per
   call) *after* replacing the config and releasing any locks. Returning
   false from these methods sets the "requires restart" flag, which now
   lives in the config.Wrapper.

This should be deadlock free as the CommitConfiguration calls can take
as long as they like and can wait for locks to be released when they
need to tweak things. I think this should be safe compared to before as
the CommitConfiguration calls were always made from a random background
goroutine (typically one from the HTTP server), so it was always
concurrent with everything else anyway.

Hence the CommitResponse type is gone, instead you get an error back on
verification failure only, and need to explicitly check
w.RequiresRestart() afterwards if you care.

As an added bonus this fixes a bug where we would reset the "requires
restart" indicator if a config that did not require restart was saved,
even if we already were in the requires-restart state.

GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3386
2016-07-04 20:32:34 +00:00
Jakob Borg
6d357211b2 lib/config: Remove "Invalid" attribute (fixes #2471)
This contains the following behavioral changes:

 - Duplicate folder IDs is now fatal during startup
 - Invalid folder flags in the ClusterConfig is fatal for the connection
   (this will go away soon with the proto changes, as we won't have any
   unknown flags any more then)
 - Empty path is a folder error reported at runtime

GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3370
2016-07-02 19:38:39 +00:00
Jakob Borg
b0d03d1f1c lib/config: Retain slash at end of path after expanding ~ (fixes #2782)
The various path cleaning operations done in in cleanedPath() removes
it, so we make sure it's added again at the end. This makes adding the
slash in prepare() unnecessary, but keep it anyway for display purposes
(people looking at the config).

GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3342
2016-06-26 10:17:20 +00:00
Jakob Borg
e6b78e5d56 lib/rand: Break out random functions into separate package
The intention for this package is to provide a combination of the
security of crypto/rand and the convenience of math/rand. It should be
the first choice of random data unless ultimate performance is required
and the usage is provably irrelevant from a security standpoint.

GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3186
2016-05-26 07:02:56 +00:00
aviau
ee94d53bda all: Remove execute bit for non-executable files
Skip-check: authors

GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3105
2016-05-17 14:39:50 +00:00
Jakob Borg
922e1407c2 lib/config: Don't migrate non-HTTPS-URL discovery servers to new path (fixes #3103)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3104
2016-05-17 13:43:35 +00:00
Jakob Borg
2c1323ece6 lib/connections: Un-deprecate relaysEnabled (fixes #3074)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3098
2016-05-17 00:05:38 +00:00
Alex
d59fd9c22d lib/config: use correct ReleasesURL when upgrading from v0.13-beta
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3096
2016-05-14 22:03:07 +00:00
Jakob Borg
5d2414dfa9 lib/config: Bump config version to 14
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3092
2016-05-13 14:13:24 +00:00
Jakob Borg
e8b4286c93 lib/config: Change upgrade check URL (fixes #3086)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3089
2016-05-13 09:17:10 +00:00
Jakob Borg
b993b41847 lib/config: Minor attribute updates
As discussed in
https://github.com/syncthing/docs/pull/169

GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3082
2016-05-12 08:23:18 +00:00
Jakob Borg
8b7b0a03eb lib/config: Don't require restart when adding folders/devices or changing listen address
The VersioningConfig change is because it defaults to nil but gets
deserialized to map[string]string{}. Now prepare() enforces a single
representation of the empty map.

GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3065
2016-05-09 11:30:19 +00:00
Jakob Borg
39899e40bf cmd/syncthing: Use ReadAll + json.Unmarshal in places were we care about consuming the reader
Because json.NewDecoder(r).Decode(&v) doesn't necessarily consume all
data on the reader, that means an HTTP connection can't be reused. We
don't do a lot of HTTP traffic where we read JSON responses, but the
discovery is one such place. The other two are for POSTs from the GUI,
where it's not exactly critical but still nice if the connection still
can be keep-alive'd after the request as well.

Also ensure that we call req.Body.Close() for clarity, even though this
should by all accounts not really be necessary.

GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3050
2016-05-06 22:01:56 +00:00
Audrius Butkevicius
674fc566bb lib/connections: Refactor
1. Removes separate relay lists and relay clients/services, just makes it a listen address
2. Easier plugging-in of other transports
3. Allows "hot" disabling and enabling NAT services
4. Allows "hot" listen address changes
5. Changes listen address list with a preferable "default" value just like for discovery
6. Debounces global discovery announcements as external addresses change (which it might alot upon starting)
7. Stops this whole "pick other peers relay by latency". This information is no longer available,
   but I don't think it matters as most of the time other peer only has one relay.
8. Rename ListenAddress to ListenAddresses, as well as in javascript land.
9. Stop serializing deprecated values to JSON

GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/2982
2016-05-04 19:38:12 +00:00
Jakob Borg
09832abe50 lib/config: Change folder type attribute to a FolderType type
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3032
2016-05-04 11:26:36 +00:00
Audrius Butkevicius
eabd2fc936 lib/model: Use factories for creating folders
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3029
2016-05-04 10:47:33 +00:00
Lars K.W. Gohlke
dffc34559b lib/config: Remove dead code
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3004
2016-04-22 20:30:58 +00:00
AudriusButkevicius
1a5f524ae4 lib/model, lib/protocol: Implement temporary indexes (fixes #950)
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/2252
2016-04-15 10:59:41 +00:00
Audrius Butkevicius
19b4f3bfb4 lib/nat: Add a nat package and service to track mappings on multiple IGDs 2016-04-10 19:36:38 +00:00
Audrius Butkevicius
4389bb037d lib/model: Add option for overwriting names on connect (fixes #2912) 2016-04-09 07:43:47 +00:00
Jakob Borg
a4f0b85462 lib/config: Disable cacheIgnoredFiles, new default is disabled 2016-04-03 20:18:16 +01:00
Jakob Borg
f5f0e46016 lib: Use bytes.Equal instead of bytes.Compare where possible 2016-03-31 15:12:46 +00:00
Audrius Butkevicius
1d17891286 lib/upnp: Refactor out methods to util with tests, refactor IGD 2016-03-25 20:22:29 +00:00
Jakob Borg
c439c543d0 tests: messagediff argument order should be expected, actual
So that the diff describes the changes that happened in actual as
compared to expected. The opposite is confusing.
2016-03-17 08:03:29 +01:00
Jakob Borg
17517bcc3d Don't show restart prompt when changing folder label (fixes #2840) 2016-03-16 12:18:21 +01:00
Lars K.W. Gohlke
16c3d39fd2 Add folder label in addition to ID (fixes #966)
An auto generated ID is suggested on folder creation to reduce conflicts with
folders created on other devices.
2016-03-11 09:48:46 +00:00
Jakob Borg
09ebc33b30 Fix tests on 32 bit 2016-03-08 09:06:59 +01:00
Audrius Butkevicius
a8ffde6f21 Add deps 2016-03-06 20:32:10 +00:00
Jakob Borg
e93c766c42 Rename RawAPIKey -> APIKey in GUIConfiguration 2016-02-02 11:12:25 +01:00
Antony Male
5971c00a4f Support multiple API keys (command-line and config) (fixes #2747) 2016-01-30 15:18:09 +00:00
Jakob Borg
f741066466 Always run relaying when enabled (fixes #2665) 2016-01-12 14:15:47 +01:00
Audrius Butkevicius
cd54186113 Add support for themes (fixes #1925) 2016-01-10 17:57:27 +00:00
Jakob Borg
18e70f4e79 Ensure loaded config is free of duplicate devices (fixes #2627) 2015-12-31 09:17:17 +01:00
AudriusButkevicius
33a87f54bb Only override TLS settings if scheme is specified 2015-12-18 19:42:39 +00:00
Jakob Borg
3025caf932 Also remove IP per disco server 2015-12-08 10:10:34 +01:00
Jakob Borg
95cfc50fbd Remove Android hacks (fixes #2505)
Also fixes what I think migh thave been a bug where we did not use the
proxy for usage reports. And removes the BuildEnv field that we don't
need any more.
2015-12-08 10:10:06 +01:00
Jakob Borg
cb0d739daf New key for discovery-*-3 2015-12-01 11:20:16 +01:00
Jakob Borg
d46f267663 Handle sparse files (fixes #245) 2015-11-21 17:58:09 +01:00
Jakob Borg
b1a86fbc98 Warn the user if they're running with an insecure looking setup (fixes #2139) 2015-11-16 21:58:08 +01:00
Mike Boone
342036408e Fix typos. 2015-11-11 21:20:34 -05:00
Alexander Graf
34cd8e3f95 Add default-v4 and default-v6 as options for discovery 2015-11-09 15:56:46 +01:00
Jakob Borg
b9b630e3b6 Change certificate on discovery-2 2015-11-09 13:58:44 +01:00
Jakob Borg
55592137a2 Use constructor functions for FolderConfiguration and DeviceConfiguration 2015-11-07 09:50:04 +01:00
Jakob Borg
34aa41e17b Cache the Path() call, as it's quite expensive and called a lot 2015-11-06 07:11:22 +00:00
Jakob Borg
00c363829c Refactor: move folder prepare to it's own function 2015-11-05 08:01:47 +00:00
Jakob Borg
9df701906f Run JSON decoding through the usual setting of defaults and fixing up
I see no reason not to do this, and it gives a unified place (the prepare()
call) to initialize cached attributes and so on.
2015-11-04 20:33:10 +00:00
Jakob Borg
283671fa9d Remove old dead code 2015-11-04 20:15:36 +00:00
Jakob Borg
435c29755d We haven't had cleartext passwords in the config for ages 2015-11-04 20:15:11 +00:00
Jakob Borg
2a4fc28318 We should pass around db.Instance instead of leveldb.DB
We're going to need the db.Instance to keep some state, and for that to
work we need the same one passed around everywhere. Hence this moves the
leveldb-specific file opening stuff into the db package and exports the
dbInstance type.
2015-10-31 12:35:30 +01:00
Jakob Borg
08c8d679ac Create a correct URL is more difficult than just slapping on a scheme (fixes #2316) 2015-10-30 21:22:40 +01:00
Jakob Borg
c42f1b53ab pulorder.go -> pullorder.go 2015-10-27 12:14:14 +01:00
Jakob Borg
d171173e90 AlwaysLocalNets should not default to null 2015-10-27 12:04:51 +01:00
Jakob Borg
679f0f9363 Fix some config Copy() things we had forgotten 2015-10-27 11:53:42 +01:00
Jakob Borg
724c1e297f Remove handling of config versions < 10 (v0.11.0) 2015-10-27 11:46:33 +01:00
Jakob Borg
83154569b1 Refactor config types into separate files 2015-10-27 11:37:03 +01:00
Jakob Borg
a32ac62208 Don't expect ending slash on Windows 2015-10-22 13:49:41 +02:00
Jakob Borg
d7a934cf0e Paths must not end with slash on Windows 2015-10-22 11:39:34 +02:00
Jakob Borg
29b0017445 Merge pull request #2386 from AudriusButkevicius/epoint
Change relaypoolsrv endpoint
2015-10-17 09:14:35 +09:00
Jakob Borg
910a7c619a Merge pull request #2381 from AudriusButkevicius/maxcon
Allow limiting max conflicts (fixes #2282)
2015-10-17 09:10:31 +09:00
Audrius Butkevicius
273fac2028 Change relaypoolsrv endpoint
Just incase we want to show some stats in the future, such as a Geo-IP based map of where relays are, their dot size being proportional to global rate limits,
together with potentially how much data in total has been transferred, and how many sessions there by crawling relay status pages etc ;)
2015-10-17 00:10:01 +01:00
Audrius Butkevicius
752533489a Allow limiting max conflicts (fixes #2282) 2015-10-16 19:26:38 +01:00
Jakob Borg
e15be5c2bf Merge pull request #2354 from eipiminus1/issue1361
Add trailing folder seperator to allow symlinks as folder path (fixes #1361)
2015-10-16 09:29:37 +09:00
Jakob Borg
953a67bc3a Option -gui-address should accept scheme prefixes (fixes #2371) 2015-10-13 08:26:07 +09:00
Yannic A
054bc970e2 Add trailing folder seperator to allow symlinks as folder path (fixes #1361) 2015-10-10 19:38:59 +02:00
Audrius Butkevicius
d985ed553a Make puller pause configurable 2015-10-10 11:36:09 +01:00
Jakob Borg
76af9ba53d Implement facility based logger, debugging via REST API
This implements a new debug/trace infrastructure based on a slightly
hacked up logger. Instead of the traditional "if debug { ... }" I've
rewritten the logger to have no-op Debugln and Debugf, unless debugging
has been enabled for a given "facility". The "facility" is just a
string, typically a package name.

This will be slightly slower than before; but not that much as it's
mostly a function call that returns immediately. For the cases where it
matters (the Debugln takes a hex.Dump() of something for example, and
it's not in a very occasional "if err != nil" branch) there is an
l.ShouldDebug(facility) that is fast enough to be used like the old "if
debug".

The point of all this is that we can now toggle debugging for the
various packages on and off at runtime. There's a new method
/rest/system/debug that can be POSTed a set of facilities to enable and
disable debug for, or GET from to get a list of facilities with
descriptions and their current debug status.

Similarly a /rest/system/log?since=... can grab the latest log entries,
up to 250 of them (hardcoded constant in main.go) plus the initial few.

Not implemented in this commit (but planned) is a simple debug GUI
available on /debug that shows the current log in an easily pasteable
format and has checkboxes to enable the various debug facilities.

The debug instructions to a user then becomes "visit this URL, check
these boxes, reproduce your problem, copy and paste the log". The actual
log viewer on the hypothetical /debug URL can poll regularly for new log
entries and this bypass the 250 line limit.

The existing STTRACE=foo variable is still obeyed and just sets the
start state of the system.
2015-10-03 18:09:53 +02:00
Jakob Borg
4581c57478 Fix import paths 2015-09-22 19:38:46 +02:00
Jakob Borg
6e3b3dc4e7 Comment typo fix 2015-09-21 14:20:33 +02:00
Jakob Borg
8d421a62d2 Usage reporting should recognize new discovery server IP:s 2015-09-21 10:54:21 +02:00
Jakob Borg
bd0e97023e We don't need a separate subscription lock
We forgot to lock it during replace, so data rate. This is simpler.
2015-09-21 10:42:07 +02:00
Jakob Borg
acba61babb Ping handling changes in protocol, removed from config here 2015-09-21 10:14:27 +02:00
Jakob Borg
24d2a93c0d Change default discovery server names 2015-09-20 22:30:31 +02:00
Jakob Borg
b0cd7be39b New global discovery protocol over HTTPS (fixes #628, fixes #1907) 2015-09-20 21:10:53 +02:00
Jakob Borg
fa95c82daf Add custom networks that are considered local (internal routing, VPN etc)
Allows things like this in the <options> element:

  <alwaysLocalNet>10.0.0.0/8</alwaysLocalNet>
2015-09-11 15:10:41 +02:00
Jakob Borg
9dae87c80c Allow configuration of releases URL 2015-09-10 14:16:44 +02:00
Jakob Borg
46364a38c6 Allow configuration of usage reporting URL 2015-09-10 14:08:40 +02:00
Jakob Borg
2af3a92833 Allow fractional percentages (fixes #2233) 2015-09-05 12:39:15 +02:00
AudriusButkevicius
94c52e3a77 Add scan percentages (fixes #1030) 2015-08-27 19:20:43 +01:00
Jakob Borg
be332a6223 Local discovery should use the same port on v4 as v6 (fixes #2201) 2015-08-27 16:04:21 +02:00
Jakob Borg
40d0100132 Change default IPv6 multicast address (fixes #2090) 2015-08-23 14:59:38 +02:00
Audrius Butkevicius
1e8b185377 Add switch to disable relays 2015-08-19 21:13:40 +01:00
Audrius Butkevicius
031804827f Do not start relay service unless explicitly asked for, or global announcement server is running 2015-08-19 21:13:10 +01:00
Audrius Butkevicius
6cccd9b6fc Add dynamic relay lookup (DDoS relays.syncthing.net!) 2015-08-19 21:12:34 +01:00
Audrius Butkevicius
a388fb0bb7 Check relays for available devices 2015-08-19 20:57:37 +01:00
Audrius Butkevicius
c2ccab4361 Add unsubscribe to config 2015-08-19 20:55:33 +01:00
Audrius Butkevicius
34c04babbe Large refactoring/feature commit
1. Change listen addresses to URIs
2. Break out connectionSvc to support listeners and dialers based on schema
3. Add relay announcement and lookups part of discovery service
2015-08-19 20:53:01 +01:00
Jakob Borg
a5345ac71e Don't get stuck at "Syncing 0%" when adding a new folder
The number of copiers and pullers is set to default at config loading
time, but the new folder configuration doesn't pass through config
loading so we start up with 0 copiers and 0 pullers and hence get stuck.
I moved the default handling to the puller itself instead. I think this
way is also cleaner as we get to keep the 0 in the config and the puller
gets to decide the defaults on it's own.
2015-08-14 10:35:51 +02:00
Jakob Borg
49aa9399be Repair config tests 2015-08-09 11:46:28 +02:00
Jakob Borg
a2df691c7d Configurable home disk percentage, translations 2015-08-09 10:37:23 +02:00
Lode Hoste
dfaa999291 Stop folder when running out of disk space (fixes #2057)
& tweaks by calmh
2015-08-09 10:37:23 +02:00
Jakob Borg
7705a6c1f1 mv internal lib 2015-08-09 09:35:26 +02:00