When dropping delta index IDs due to upgrade, only drop our local one.
Previously, when dropping all of them, we would trigger a full send in
both directions on first connect after upgrade. Then the other side
would upgrade, doing the same thing. Net effect is full index data gets
sent twice in both directions.
With this change we just drop our local ID, meaning we will send our
full index on first connect after upgrade. When the other side upgrades,
they will do the same. This is a bit less cruel.
The current 500 "test failed" looks and sounds like a problem in the
relay pool server, while it actually indicates a problem on the
announcing side. Instead use 400 "connection test failed" to indicate
that the request was bad and what was the test.
Since #4340 pulls aren't happening every 10s anymore and may be delayed up to 1h.
This means that no folder error event reaches the web UI for a long time, thus no
failed items will show up for a long time. Now errors are populated when the
web UI is opened.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4650
LGTM: AudriusButkevicius
This is a new revision of the discovery server. Relevant changes and
non-changes:
- Protocol towards clients is unchanged.
- Recommended large scale design is still to be deployed nehind nginx (I
tested, and it's still a lot faster at terminating TLS).
- Database backend is leveldb again, only. It scales enough, is easy to
setup, and we don't need any backend to take care of.
- Server supports replication. This is a simple TCP channel - protect it
with a firewall when deploying over the internet. (We deploy this within
the same datacenter, and with firewall.) Any incoming client announces
are sent over the replication channel(s) to other peer discosrvs.
Incoming replication changes are applied to the database as if they came
from clients, but without the TLS/certificate overhead.
- Metrics are exposed using the prometheus library, when enabled.
- The database values and replication protocol is protobuf, because JSON
was quite CPU intensive when I tried that and benchmarked it.
- The "Retry-After" value for failed lookups gets slowly increased from
a default of 120 seconds, by 5 seconds for each failed lookup,
independently by each discosrv. This lowers the query load over time for
clients that are never seen. The Retry-After maxes out at 3600 after a
couple of weeks of this increase. The number of failed lookups is
stored in the database, now and then (avoiding making each lookup a
database put).
All in all this means clients can be pointed towards a cluster using
just multiple A / AAAA records to gain both load sharing and redundancy
(if one is down, clients will talk to the remaining ones).
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4648
This keeps the data we need about sequence numbers and object counts
persistently in the database. The sizeTracker is expanded into a
metadataTracker than handled multiple folders, and the Counts struct is
made protobuf serializable. It gains a Sequence field to assist in
tracking that as well, and a collection of Counts become a CountsSet
(for serialization purposes).
The initial database scan is also a consistency check of the global
entries. This shouldn't strictly be necessary. Nonetheless I added a
created timestamp to the metadata and set a variable to compare against
that. When the time since the metadata creation is old enough, we drop
the metadata and rebuild from scratch like we used to, while also
consistency checking.
A new environment variable STCHECKDBEVERY can override this interval,
and for example be set to zero to force the check immediately.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4547
LGTM: imsodin
So STDEADLOCK seems to do the same thing as STDEADLOCKTIMEOUT, except in
the other package. Consolidate?
STDEADLOCKTHRESHOLD is actually called STLOCKTHRESHOLD, correct the help
text.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4598
Two issues since the filesystem migration;
- filepath.Base() doesn't do what the code expected when the path ends
in a slash, and we make sure the path ends in a slash.
- the return should be fully qualified, not just the last component.
With this change it works as before, and passes the new test for it.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4591
LGTM: imsodin
This should address issue as described in https://forum.syncthing.net/t/stun-nig-party-with-paused-devices/10942/13
Essentially the model and the connection service goes out of sync in terms of thinking if we are connected or not.
Resort to model as being the ultimate source of truth.
I can't immediately pin down how this happens, yet some ideas.
ConfigSaved happens in separate routine, so it's possbile that we have some sort of device removed yet connection comes in parallel kind of thing.
However, in this case the connection exists in the model, and does not exist in the connection service and the only way for the connection to be removed
in the connection service is device removal from the config.
Given the subject, this might also be related to the device being paused.
Also, adds more info to the logs
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4533
When STHASHING is set, don't benchmark as it's already decided. If weak
hashing isn't set to "auto", don't benchmark that either.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4349
Starting stuff from init() is an antipattern, and the innerProcess
variable isn't 100% reliable. We should sort out the other uses of it as
well in due time.
Also removing the hack on innerProcess as I happened to see it and the
affected versions are now <1% users.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4185
The folder already knew how to stop properly, but the fs.Walk() didn't
and can potentially take a very long time. This adds context support to
Walk and the underlying scanning stuff, and passes in an appropriate
context from above. The stop channel in model.folder is replaced with a
context for this purpose.
To test I added an infiniteFS that represents a large amount of data
(not actually infinite, but close) and verify that walking it is
properly stopped. For that to be implemented smoothly I moved out the
Walk function to it's own type, as typically the implementer of a new
filesystem type might not need or want to reimplement Walk.
It's somewhat tricky to test that this actually works properly on the
actual sendReceiveFolder and so on, as those are started from inside the
model and the filesystem isn't easily pluggable etc. Instead I've tested
that part manually by adding a huge folder and verifying that pause,
resume and reconfig do the right things by looking at debug output.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4117
This adds a parameter "events" to the /rest/events endpoint. It should
be a comma separated list of the events the consumer is interested in.
When not given it defaults to the current set of events, so it's
backwards compatible.
The API service then manages subscriptions, creating them as required
for each requested event mask. Old subscriptions are not "garbage
collected" - it's assumed that in normal usage the set of event
subscriptions will be small enough. Possibly lower than before, as we
will not set up the disk event subscription unless it's actually used.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4092
This deprecates the current minDiskFreePct setting and introduces
minDiskFree. The latter is, in it's serialized form, a string with a
unit. We accept percentages ("2.35%") and absolute values ("250 k", "12.5
Gi"). Common suffixes are understood. The config editor lets the user
enter the string, and validates it.
We still default to "1 %", but the user can change that to an absolute
value at will.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4087
LGTM: AudriusButkevicius, imsodin
After this change,
- Symlinks on Windows are always unsupported. Sorry.
- Symlinks are always enabled on other platforms. They are just a small
file like anything else. There is no need to special case them. If you
don't want to sync some symlinks, ignore them.
- The protocol doesn't differentiate between different "types" of
symlinks. If that distinction ever does become relevant the individual
devices can figure it out by looking at the destination when they
create the link.
It's backwards compatible in that all the old symlink types are still
understood to be symlinks, and the new SYMLINK type is equivalent to the
old SYMLINK_UNKNOWN which was always a valid way to do it.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3962
LGTM: AudriusButkevicius
The monitor process should not set STNORESTART as this indicates the
intention from the user. Setting STMONITORED is enough, as this tells
the next Syncthing instance that it is running under the monitor
process.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3932
The Ping event is important, as it means that requests complete within
a sensible time. The disk events API didn't have the Ping event, so
if there were no disk events, the request would keep taking forever.
Unless, of course, there's a reverse proxy which times the request out
after a suitably large interval (or something else aborts it), in which
case Syncthing isn't very happy.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3929
Instead of
[I6KAH] 19:05:56 INFO: Single thread hash performance is 359 MB/s using minio/sha256-simd (354 MB/s using crypto/sha256).
it now says
[I6KAH] 19:06:16 INFO: Single thread SHA256 performance is 359 MB/s using minio/sha256-simd (354 MB/s using crypto/sha256).
[I6KAH] 19:06:17 INFO: Actual hashing performance is 299.01 MB/s
which is more informative. This is also the number it reports in usage
reporting.
GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/3918
Jakob Borg
Matic Potočnik
Simon Frei
Audrius Butkevicius
Michael Ploujnikov
Tobias Tom
Jose Manuel Delicado
Antony Male