In support of auto-layout:
1/ collect and merge all extents to find the largest common-start free region
2/ verify that we meet the "all volumes must use the same set of disks"
2/ mark the disks to be added in add_to_super_imsm_volume
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
All operations that rely on loading from an existing container (like
--add) will fail after a disk has been removed. Provide an option to
skip missing / offline disks rather than abort. We attempt to do this
in the load_super_{imsm,ddf}_all cases when mdmon is running i.e. we
already have a consitent version of the metadata running in the system.
Otherwise, we fail as normal and let the administrator fix up the
container.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
If the checksum verification fails and mdmon is running we retry the
load to get a consistent snapshot of the mpb. Found by
tests/08imsm-overlap.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Actually, rename mark_failure to mark_missing and then implement the
correct mark_failure which according to new documentation is to:
1/ Set the FAILED status bit
2/ Set IMSM_ORD_REBUILD to mark the disk out of sync
3/ Set map->failed_disk_num if this is the first failure detected
failure (it is ~0 otherwise)
Previously the assumption was that IMSM_ORD_REBUILD only appeared in
map[1], so all routines that care about out-of-sync disks need to be
updated.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
A foreign disk is one that all other drives believe is not-in-sync but
does not have the 'failed' status bit set.
This also reverts, because that commit is addressing the wrong problem.
Ideally mdmon would kick "non-fresh" drives like the kernel does at
native-md activation time, but that is too awkward to implement at the
moment because mdadm owns container manipulations.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Spares in the imsm case are marked with the "match-all" uuid of
ffffffff-ffffffff-ffffffff-ffffffff. When performing incremental
assembly we need to associate such devices with a populated container
uuid. Also when performing --detail on a container with only spares
present we can make an attempt to return a real uuid.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
IMSM_NO_PLATFORM turns off checks that should be tested, so provide a
IMSM_TEST_OROM variable to allow testing the orom constraints in the
mdadm regression suite.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
mdadm -C /dev/md/r1d2n1s0-5 -amd -l1 --size 5242880 -n 2 /dev/sdb /dev/sdc -R -f -v -c 64
mdadm: chunk size ignored for this level
mdadm: super0.90 cannot open /dev/sdb: Device or resource busy
mdadm: super1.x cannot open /dev/sdb: Device or resource busy
mdadm: platform does not support a chunk size of: 0
mdadm: device /dev/sdb not suitable for any style of array
Reported-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Tested-by: Jacek Danecki <jacek.danecki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Failed disks do not have valid serial numbers which means we will not
pick up the 'failed' status bit from the metadata entry. Check for
dl->index == -2 to prevent failed disks from being incorporated into the
container.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
If the metadata handler can not find its platform support components
then there is no way for it to verify that the raid configuration will
be supported by the option-rom. Provide a generic method for metadata
handlers to warn the user that the array they are about to create may
not work as intended with a given platform.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This is a key orom-compatibility constraint. A nice side effect is that
it precludes the corner case of 'create' racing against 'spare activate'
since the create will fail to convert a spare into an array member. At
create time we check if this is the first member array in the container
if it is than all disks are possible candidates, if it is not then only
current members are permitted.
A bit hairier is spare-activation handling in the presence of this
constraint. It is difficult because spare handling is per array. The
approach taken is to:
1/ check that a new spare can cover all defined arrays in the container
2/ ensure that partially assimilated spares are the first candidates
when looking for a spare region to activate.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Let handlers specifiy their own defaults, specifically needed for the
imsm-raid5 case where mdadm defaults to 'ls' and imsm to 'la'.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dump the orom capabilities and hardware disk configuration. This code
relies on the name of scsi_host objects to determine the hardware port
number. Hopefully this information is stable...
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Metadata formats like imsm work in concert with platform firmware and
hardware, so provide a way for mdadm to display this info to the user.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
These checks are only enabled when platform support for imsm is found,
i.e. ahci driver is loaded and talking to an Intel(R) controller, and
the option rom header is located.
They can be turned off by setting the environment variable
IMSM_NO_PLATFORM to 1.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
imsm metadata requires all members of a raid volume to start at the same
offset. So, incrementally build a composite disk from all the
candidates passed to ->validate_geometry. After each disk is added
merge the extents and search for a common start offset that satisfies
the requested raid device size.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When chunksize is 0 in the raid1 case we need to use
info_to_blocks_per_member() to calculate the array size.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
If, when creating an array, a signal target device is given which
is a container, then allow the metadata handler to choose which
devices to use.
This is currently only supported for DDF.
Signed-off-by: NeilBrown <neilb@suse.de>
1/ When truncating the space reserved for the metadata round down to an
even numbered sector count to avoid an off-by-one error when
sysfs_add_disk rounds up.
2/ Set the current metadata parameter block size
as a floor.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Make sure every failure from add_to_super prints a suitable
error message, and then don't print any error in the caller.
Signed-off-by: NeilBrown <neilb@suse.de>
Change the multibyte disk status field definitions to imsm byte-order
(little-endian) to match other multibyte field definitions.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Change the "env_check_mdmon" function to be more generic, accepting
and environment variable name, as soon we will have a new use for it.
Signed-off-by: NeilBrown <neilb@suse.de>
NeilBrown
Dan Williams