This adds a buffer size argument to load_sys(), rather than relying on
a hard coded buffer size. The old behavior was safe because we knew
the kernel would never return strings overrunning the buffers, however
it was ugly, and would cause code checking tools to spit out warnings.
This caused a Coverity warning over the read into
sra->sysfs_array_state which is only 20 bytes.
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
A recent commit removed a call to abort_reshape() when IMSM reshape
completed. An unanticipated result of this is that the suspended
region is not cleared as it should be.
So after a reshape, a region of the array will cause all IO to block.
Re-instate the required updates to suspend_{lo,hi} coped from
abort_reshape().
This is caught (sometimes) by the test suite.
Also fix a couple of typos found while exploring the code.
Reported-by: Ken Moffat <zarniwhoop@ntlworld.com>
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Fixes: 2139b03c20 ("imsm: don't call abort_reshape() in imsm_manage_reshape()")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Abort imsm_manage_reshape() without updating the migration record if any
error occurs when checking progress. If reshape is interrupted and the
migration record is then updated, the checkpoint will be wrong and will
cause reshape to fail when the array is restarted.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Waiting for reshape progress is done by using select() on sync_completed
to block until an exception condition is signalled on the
filedescriptor. This happens when the attribute's value is updated by
the kernel, but if the array is stopped when mdadm is blocked on
select() this will never happen, because this attribute is then removed
and apparently the kernel doesn't do sysfs_notify() when removing a
sysfs attribute. So set a 3 second timeout for the sysfs_wait() call.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: NeilBrown <neilb@suse.com>
The Intel Volume Management Device (VMD) is an integrated
endpoint on the platform's PCIe root complex that acts
as a host bridge to a secondary PCIe domain.
This patch adds proper handling of NVMe devices attached to VMD domain.
Each VMD domain is treated as a separate controller (HBA).
Spanning between domains is forbidden.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: NeilBrown <neilb@suse.com>
When reshape was interrupted, an incorrect checkpoint would be saved in
the migration record. Change wait_for_reshape_imsm() to return -1 when
sync_action is not "reshape" to abort early in imsm_manage_reshape()
without writing the migration record.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Calling abort_reshape() in imsm_manage_reshape() is unnecessary in case
of an error because it is handled by reshape_array(). Calling it when
reshape completes successfully is also unnecessary and leads to a race
condition:
- reshape ends
- mdadm calls abort_reshape() -> sets sync_action to idle
- MD_RECOVERY_INTR is set and md_reap_sync_thread() does not finish the
reshape
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Konrad Dabrowski <konrad.dabrowski@intel.com>
Signed-off-by: NeilBrown <neilb@suse.com>
These both have the same value, and have done since the
'devnm' concept was introduced.
So discard the pointless duplicate.
Signed-off-by: NeilBrown <neilb@suse.de>
Active arrays with IMSM metadata are counted per hba so far.
This is bad due to new functionality of orom shared between multiple
controllers i.e. more arrays can be created than is supported by orom.
This patch changes the way of counting arrays, so the result will be
sum of arrays under every hba supported by specific orom.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Replaced oroms array with list, add_orom() now only appends to this list
and add_orom_device_id() only appends devid_list node to an orom_entry.
Reported-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
It is best to keep strings all together so that they
are easier to search for in the source code.
If a string is so long that it looks ugly one line,
them maybe it should be broken into multiple lines
for display too.
Only strings which contain a newline can be broken
into multiple lines:
"It is OK to\n"
"break this string\n"
Signed-off-by: NeilBrown <neilb@suse.de>
make dprintf() print program name and __func__, so that
this messaging is consistent.
Also remove all __func__ messages from pr_err(). We shouldn't
leak that internal data in error message.
If we really want function name there, we new pr_XXX might
be wanted.
Signed-off-by: NeilBrown <neilb@suse.de>
Sometimes mdadm prints messages with wrong name "mdmon",
and vice versa.
This patch solves this problem by changing method of determining
process name.
Now "Name" will be set in const at start of a program,
previously was hardcoded as #define.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Migration record is not always cleared after successful migration. This can
block another reshape from being started. Migration will not be continued via
systemd service due to error in verifying reshape position. This patch added
clearing migration record when disk is added to container, and after successful
migration.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
The IMSM platform code was based on an assumption that the OROM or UEFI
capability structure (represented by struct imsm_orom) always belongs to
only one HBA. This assumption is no longer valid, because of newer
platforms with dual AHCI HBAs. Each HBA can have a separate OROM, but
some versions have a combined OROM for both HBAs.
This patch implements this HBA-OROM relationship in struct orom_entry,
which matches an OROM with a list of HBA PCI ids. All the detected
orom_entries are stored and retrieved using a global array and the
functions add_orom(), add_orom_device_id() and get_orom_by_device_id().
This replaces the arrays: imsm_orom, populated_orom, imsm_efi,
populated_efi.
The scan() function is extended to find all HBAs for an OROM. The list
of their device ids is retrieved from the PCI Expansion ROM Data
Structure, hence the additional field devListOffset in struct
pciExpDataStructFormat.
In UEFI mode we can't read the PCI Expansion ROM Data Structure and the
imsm_orom structures are stored in UEFI variables. They do not provide a
similar device id list, so we also check the HBA PCI class to make sure
that the HBA has RAID mode enabled.
In super-intel.c there are changes which allow spanning of IMSM
containers over HBAs of the same type, but only if the HBAs share the
same OROM. This is done by comparing imsm_orom pointers, which (outside
of platform-intel.c) always point to the global array containing all the
detected oroms. Additional warnings are added to
validate_container_imsm() to warn about potentially dangerous operations
in all the possible cases, e.g. when an array is assembled using disks
attached to HBAs with separate OROMs.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Commit 0c21b485e4 added new
function in imsm superswitch. This function should be
included in mdassemble.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Every case in prepare_update check that the size message
size is sufficient, so process_update doesn't need to check anything.
Reported-by: Vincent Berg <vberg@ioactive.com>
Signed-off-by: NeilBrown <neilb@suse.de>
If 'prepare_update' fails for some reason there is little
point continuing on to 'process_update'.
For now only malloc failures are caught, but other failures
will be considered in future.
Signed-off-by: NeilBrown <neilb@suse.de>
Due to several changes in code assemble with disks
spanned between different controllers can be obtained
in some cases. After IMSM container will be assembled, check HBA of
disks, and print proper warning if mismatch is detected.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
As strncpy doesn't guarantee to nul-terminate, some static
analysers get upset that it is followed by a 'strncat'.
So just use a 'strcpy' - strlen(disk_by_path) is constant
and definitely less than PATH_MAX.
Link: https://github.com/neilbrown/mdadm/issues/4
Signed-off-by: NeilBrown <neilb@suse.de>
If the checksum verification fails in mdadm and mdmon is running, retry
the load to get a consistent snapshot of the mpb.
Based on db575f3b
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
'missing' devices are in a different list so when collection the
serial numbers of all devices we need to check both lists.
Signed-off-by: NeilBrown <neilb@suse.de>
commit b31df43682
changed load_super_imsm to not insist on finding a partition if
ignore_hw_compat was set.
Unfortunately this is set for '--assemble' so arrays could get
assembled badly.
The comment says this was to allow e.g. --examine of image files.
A better fixes for this is to change test_partitions to not report
a regular file as being a partition.
The errors from the BLKPG ioctl are:
ENOTTY : not a block device.
EINVAL : not a whole device (probably a partition)
ENXIO : partition doesn't exist (so not a partition)
Reported-by: "David F." <df7729@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
If the mdadm thread that monitors a reshape gets SIGTERM it should
exit cleanly and clear the 'suspended' region of the array.
However it mustn't clear 'sync_max' as that would allow the
reshape to continue unmonitored.
If the thread ever does get killed, the array should really be
shutdown soon after if possible.
Signed-off-by: NeilBrown <neilb@suse.de>
This call to validate_geometry is really rather gratuitous.
It is purely about the fact that super0 cannot use more than 4TB.
So just make it an explicit test - less confusing that way.
With this, validate_geometry is only called from Create, which
makes it easier to reason about.
Also validate_geometry is now never passed NULL for the 'chunk'
parameter, so we can remove those annoying tests for NULL.
Signed-off-by: NeilBrown <neilb@suse.de>
This was waiting on "reshape_position" which doesn't
get update events.
Before sysfs_wait was introduced, the code to wait didn't
wait at all, so it spun.
With sysfs_wait, it would wait forever.
Change to wait in sync_completed which does get events.
Signed-off-by: NeilBrown <neilb@suse.de>
We have several places that wait for activity on a sysfs
file. Combine most of these into a single 'sysfs_wait' function.
Signed-off-by: NeilBrown <neilb@suse.de>
This allows the metadata on a device to be saved and later restored.
This can be useful before experimenting on an array that is misbehaving.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Transition from "degraded" to "recovery" made in OROM is slightly different
than the same transision in mdadm. Missing disk is not removed from list of
raid devices, but just from map. Therefore mdadm should not end migration
basing on existence of list of missing disks but should rely on count of
failed disks.
Signed-off-by: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@intel.com>
Tested-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
We widely use a "devnum" which is 0 or +ve for md%d devices
and -ve for md_d%d devices.
But I want to be able to use md_%s device names.
So get rid of devnum (a number) and use devnm (a 32char string).
eg.
md0
md_d2
md_home
Signed-off-by: NeilBrown <neilb@suse.de>
find_intel_devices() has take a little while to run as it scans
some directory tree, and the result isn't likely to change
often.
So cache the value and only discard it after 10 seconds.
Signed-off-by: NeilBrown <neilb@suse.de>
Attaching disks to multiple controllers of the same type has been
allowed so far. Now spanning between multiple controllers is disallowed
at all by IMSM metadata.
Signed-off-by: Marcin Tomczak <marcin.tomczak@intel.com>
Reviewed-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
It is important to check for compatibility with 'platform' or
Option ROM when creating or changing and array. However there is no
real need when simply assembling the array.
On some systems there are situations where the platform information is
not available. e.g. on some UEFI systems, UEFI is not available
during 'kdump' handling. This makes it impossible to assemble
an IMSM array to receive the dump.
So remove the requirements that the platform be visible to assemble
an IMSM array.
Signed-off-by: NeilBrown <neilb@suse.de>
mdadm --create /dev/md0 .... /dev/sda1:1024 /dev/sdb1:2048 ...
The size is in K unless a suffix: K M G is given.
The suffix 's' means sectors.
Signed-off-by: NeilBrown <neilb@suse.de>
This is currently only useful for 1.x metadata and will allow an
explicit --data-offset request on command line.
Signed-off-by: NeilBrown <neilb@suse.de>
Inappriopriate error messages (e.g. mdadm: platform does not support
raid5 with 0 disk) have been displayed when too small size was given.
This patch fixes it.
Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Size expansion to the 'max' value has been broken since
the following patch:
commit d04f65f48c
Change the values for "max size" from -1 to 1.
This patch re-enables it.
Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Both are impossible, and '1' allows size to be unsigned,
which is neater.
Also #define MAX_SIZE to be '1' to make it all more explicit.
Signed-off-by: NeilBrown <neilb@suse.de>
If we change some functions to accept 'verbose', where <0 means to be
quiet, in place of 'quiet', then we will be able to merge
'quiet' and 'verbose' together for simplicity.
Signed-off-by: NeilBrown <neilb@suse.de>
malloc should never fail, and if it does it is unlikely
that anything else useful can be done. Best approach is to
abort and let some super-daemon restart.
So define xmalloc, xcalloc, xrealloc, xstrdup which don't
fail but just print a message and exit. Then use those
removing all the tests for failure.
Also replace all "malloc;memset" sequences with 'xcalloc'.
Signed-off-by: NeilBrown <neilb@suse.de>
We do not check the return value of sysfs_get_ll() now. It is wrong.
If reading of the sysfs "degraded" key does not succeed,
the "new_degraded" variable will not be initiated
and accidentally it can have the value of "degraded" variable.
In that case the change of degradation will not be checked.
It happens if mdadm is compiled with gcc's "-fstack-protector" option
when one tries to stop a volume under reshape (e.g. OLCE).
Reshape seems to be finished then (metadata is in normal/clean state)
but it is not finished, it is broken and data are corrupted.
Now we always check the return value of sysfs_get_ll().
Even if reading of the sysfs "degraded" key does not succeed
(rv == -1) the change of degradation will be checked.
Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
We do not check if requested size of expansion is larger than maximum
available size now. If it is larger the output message is a bit misleading,
for example:
mdadm: Cannot set size on array members.
mdadm: Cannot set device size for /dev/md/vol: Device or resource busy
Now we check if requested size of expansion is larger than maximum
available size and the appropriate output message was added.
Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Use closedir() on dirp from opendir() to avoid resource leaking.
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This should be harmless, but lets be consistent and not try to close a
negative file descripter.
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Spare superblock doesn't depend on other spares in container.
When loading container metadata thunderdome
may pick a small disk for the champion. This will result in incorrect
interpretation of sizes of other disks in container when joint superblock
is returned. If any disk in container has the 2TB attribute set, the result
must have it set too.
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
If system is rebooted during rebuild, md driver changes sync_action
from 'recover' to 'idle' (during stopping all md devices).
If mdmon is still running then, it detects the change of sync_action state,
finishes rebuild and writes metadata to disks. After computer's restart
the RAID volume is in Normal state in OROM and rebuild seems to be finished.
After system's start-up RAID volume is in auto-read-only state
and metadata is in Dirty state. Rebuild seems to be finished but it is not.
Data is inconsistent (out-of-sync).
When mdmon detects the change of sync_action from 'recover' to 'idle',
it has to check if rebuild is really finished. Appropriate test was added.
Now mdmon examines each volume's member if it is being rebuilt.
Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When mdadm is compiled using e.g. 'everything' option, mdassemble
compilation is broken.
Change code to enable mdassemble compilation.
Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Put currently existing code for alignment correction in to function
imsm_component_size_aligment_check() and use it for align component size
to chunk size during volume size expansion operation.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Add support for setting max size for size change operation using
imsm_get_free_size() function for computing maximum available space.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Add function imsm_imsm_get_free_size() using part of code from function
reserve_space().
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Add metadata rollback specific code for imsm.
Let reshape_super() ability to differentiate metadata apply and rollback
actions.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Function reshape_super() guards metadata changes.
It is used to apply changes rollback in error case also.
As change (apply and rollback) can be not bi-directional reshape_super()
has to know if current action is metadata change that should be guarded
using metadata restrictions, or this is metadata rollback change
executed due to error occurrence.
In second case change has to be unconditional.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Add new meatdata update type imsm_update_size_change, and update metadata
for volume size expansion operation.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Patch adds ability to function imsm_analyze_change() for:
1. Detect size change request for volume operation.
2. Check and correct size for change.
3. Set new change kind to CH_ARRAY_SIZE
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Function imsm_num_data_members() returns wrong value for raid 1 and 10.
It returns all data member but it should return number of unique data
members (excluding mirror devices)
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Display maximum volumes per array and per controller
in --detail-platform command.
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This patch ensures metadata attribute is set correctly also for spares.
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Creation of a container using disks over 2TB should be allowed only when orom supports large disks
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When orom does not support volumes over 2TB the creation should be disallowed
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
no point calling info_to_blocks_per_member when it just returns size*2 for level==1
calc_array_size can be used for all levels
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Functions retrieving sizes from metadata do not need to check
2TB attribute only when we can guarantee the hi bits are always
clear when the MPB_ATTR_2TB_DISK attribute is not set.
Therefore the following fields are cleared on metadata load
when not in use according to attribute:
struct imsm_disk.total_blocks_hi
struct imsm_map.pba_of_lba0_hi
struct imsm_map.blocks_per_member_hi
struct imsm_map.num_data_stripes_hi
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Calculating array_blocks using info->size causes error on activation of
volume using disks over 1 TB. unsigned long long size parameter
is used instead.
total_blocks, pba_of_lba0, blocks_per_member and num_data_stripes overflow
when using disks over 2TB.
Part of fillers in metadata is used to contain hi bits of the numbers
that are likely to go over 32 bit limit.
Functions are added to get and set such fields as the hi bits are not
adjacent with low bits in the structures.
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When OLCE is in progress, checkpoint steps are getting bigger due to added space during process.
When mdadm fails after saving "max" to sync_max, mdmon will monitor process
and switch reshape to next array. At this moment we have got information
inconsistency between metadata and migration record.
To avoid this, clear migration record by mdmon /exception from the rule
that migration record is maintained by mdadm/ when reshape switches
to next array.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When reshape is broken it can occur that metadata is not saved properly.
This can cause that reshape process is farther in md than metadata states.
On restart save checkpoint to store current position /probably farther/
that can be read from md.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When chunk size migration occurs (e.g. 128k->4k) first checkpoint cannot
be set in md due to too small step. Correct migration record initialization
to allow whole copy area usage and increase migration checkpoint step.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When during incremental assembly general migration is in progress,
starting degraded array causes that no more disks (even present)
can be added later as array is already started.
Request all previously present disks during general migration for assembly.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Fix the case with creating an array with given container in command line
instead of real devices:
mdadm -CR /dev/md/raid0 -l 0 -n 2 -z5G /dev/md/imsm
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
IMSM OROM limits number of volumes per controller. Volumes
above the limit are blocked in OROM. mdadm should follow OROM limitations
in this area. Therefore we need to count number of volumes on the devices
attached to SATA (ahci driver) or SAS (isci) controller. Adding a new volume
must be blocked if the number of volumes on devices attached to the given
controller is exceeded.
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This option is going to be used to load and analyse the metadata from
devices. This is needed to count the number of volumes on devcies attached
to particular Intel controller (SATA or SAS). It shall be done without
activation of container and volumes on the devices.
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Prepare function for subsequent changes related to
loading metadata from devices list.
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
The printed messages should be more appropriate and understandable
for user. If maxsize is equal 0, this means there is no free space left
on device. If size is greater than maxsize, this means there is not enough
space to create a new volume of given size.
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Make test for all sub arrays having the same number of devices
dependant on the option ROM requirements being checked.
08imsm-overlap disables the OROM check but then fails because this
test causes it to.
Reported-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This fields doesn't work any more as ->getinfo_super clears the info
structure at an awkward time. So get rid of it and do it differently.
The issue is that the metadata handler cannot tell if the uuid it has
was randomly generated or explicitly requested, except on the first
call.
And we don't want to accept explicit requests for IMSM.
So when it was auto-generated, make it look distinctive by having the
same int copied in all 4 positions. If someone requests a uuid like
that, I guess they get away with it.
Reported-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Chunk size only migration for raid0 and raid5 is not possible.
(mdadm UT 15* fails). Mdadm exits with information:
mdadm: imsm unknown layout 0xffffffff for this raid level 0
Problem was introduced in patch (2011-11-16):
imsm: platform capabilities are not validated during level migration
During chunk size migration layout variable is not set correctly.
Set it correctly for this migration type.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
load_imsm_migr_rec() should see difference between no migration record due
to no migration in progress and loading migration record error.
Additional return value (-2) was introduced to this function.
Using new status load_super_imsm_all() can correctly check loading
migration record status.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
make everything doesn't compile (again) due to not used function warning
and uninitialized variable.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Add definition:
MIGR_REC_BUF_SIZE
MIGR_REC_POSITION
to super-intel.c and do not use magic numbers
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This patch is addition to patch:
"imsm: FIX: Limit migration record operation by disk slot not by index"
Location of migration record (2 first slots) should be taken on up to date
information. It is in first map.
Change slot verification to use first map only.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Jes Sorensen
NeilBrown
Artur Paszkiewicz
Pawel Baldysiak
NeilBrown
Przemyslaw Czarnowski
Marcin Tomczak
Maciej Naruszewicz
Lukasz Dorau
Czarnowska, Anna
Adam Kwolek
Labun, Marcin
Williams, Dan J