Before we freeze a container in preparation for growing a subarray, we
need to be sure all the subarrays are idle.
This test is racy as recovery could start at any moment following a
failure. However it is still useful as it stops us from even trying
to start a reshape while a reshape or recovery is active.
Signed-off-by: NeilBrown <neilb@suse.de>
Sometimes we want to convert a devnum to a devname without allocating
memory. So provide function to do the formatting without allocation.
Signed-off-by: NeilBrown <neilb@suse.de>
For more than one disk tested additional_test_list was searched from last
point, not from begin.
This bug causes that more than 2 disks cannot be added to imsm array,
when imsm_add_spare() is used for this.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Before looking for a spare to rebuild a degraded array, check if there
are any failed disks in container. Block rebuild if another sub-array
is failed until failed disks are removed from container.
Currently, Intel metadata handler rebuilds all sub-arrays even if one
of them is non-redundant. In case of failed sub-array, failed disks
are just replaced with new ones in the metadata mapping. The data for
failed disk is not restored even the disk is present in the system.
With this fix, we require the removal of the failed disk from
container to start the process of rebuilding the array with failed
member. If the disk is physically pulled out of the system, the disk
is removed from container automatically by exiting udev rules.
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Manager thread shall pass the information to monitor thread (mdmon)
that some devices are removed from container. Otherwise, monitor
(mdmon) might use such devices (spares) to rebuild the array that has
gone degraded.
This problem happens for imsm containers, since a list of the
container disks is maintained in intel_super structure. When array
goes degraded, the list is searched to find a spare disks to start
rebuild. Without this fix the rebuild could be stared on the spare
device that was a member of the container, but has been removed from
it.
New super type function handler has been introduced to prepare
metadata format specific information about removed devices.
int (*remove_from_super)(struct supertype *st, mdu_disk_info_t *dinfo)
The message prepared in remove_from_super is later processed by
process_update handler in monitor thread.
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When calling mdadm -C --metadata=imsm -l 1 /dev/sd..
mdadm segfaults in default_chunk_imsm()
above syntax is incorrect, but mdadm should error instead of segfaulting
Signed-off-by: Luca Berra <bluca@comedia.it>
Signed-off-by: NeilBrown <neilb@suse.de>
This is useful with 1.1 and 1.2 metadata to update the metadata if
the device size has changed.
The same functionality can be achieved by writing to the device size
in sysfs after re-adding normally, but in some cases this might be
easier.
Signed-off-by: NeilBrown <neilb@suse.de>
Growing an array when there aren't enough spares can make the array
degraded. This works but might not be what is wanted.
So warn the user in this case and require a --force to go ahead
with the reshape.
Signed-off-by: NeilBrown <neilb@suse.de>
it results in wrong output of mdadm --detail (shows reshaping instead
of recovering)
Signed-off-by: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Sometimes (~50%) mdadm -Ss cannot stop container as mdmon opens its device
and do not close it before exit(). The period between open and release of
handle is too long and md is not able stop device. Releasing handle before
exit does not block md.
Signed-off-by: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
counterpart of 417f346ee0 for incremental.
If md device has metadata_version="none" super_by_fd() matches
supertype=super0.
Call of load_container() dereferences null, so we have to forbid it.
Signed-off-by: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Sometimes wait_backup() omits transition from reshape to idle state
and mdadm seams to be hung. So check the 'complete' count
*before* waiting rather than only after.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When wait_reshape() function starts it can occurs that reshape is
finished already, before wait_reshape() start. This can lead to wait
for change state inside this function for a long time. To avoid this
before wait we should test if finish conditions are not reached
already.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
sync_completed_fd handler has to be closed when array is closing.
This is in pair to open handler code.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
After takeover, layout has no meaning for computing geo map for raid0
and raid4. Set layout to 0 for such cases. It can happen after
takeover operation when not all array information is reread.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Move opening backup file to the function for future reuse during
container reshape.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When disk is added, set valid slot numbers (positive) only.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When performing backward takeover to raid0 monitor cannot exit
for single raid0 array configuration.
Monitor is locked by communication (ping_manager()) after unfreeze()
Do not ping manager for raid0 array as they shouldn't be monitored.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When we add a spare to a container it takes a while
before it is noticed by mdmon and recovery starts.
During this time the array remains degraded but we don't want to add
any more spares to this container. Therefore we must check container
with degraded array if it doesn't already have a suitable spare.
container_choose_spare is reused with from=to
Domain check is not needed in this situation.
Ping_manager after moving disk is needed to be able to see
newly added disk in container after coming back through the loop.
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
We may call chose_spare several times before we find a suitable one
so it is better to get the size beforehand.
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Check on upper limit of number of devices was in the wrong place.
Result was could not create array with more than 27 devices without
explicitly setting metadata, even though default metadata allows more.
Fixed, and also perform check when growing an array.
Signed-off-by: NeilBrown <neilb@suse.de>
Though not having the proper backup file can cause data corruption, it
is not enough to justify not being able to start the array at all.
So allow "--invalid-backup" to be specified which says "just continue
even if a backup cannot be restored".
Signed-off-by: NeilBrown <neilb@suse.de>
An attempt to invoke super_by_fd() on device that has
metadata_version="none" always matches super0 (as test_version is "").
In Assemble() it results in segfault when load_container is invoked
(=null for super0).
As of now load_container is only started if it points to valid pointer.
Signed-off-by: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Now that we check the error return of 'update_super' better, we
much make sure that ddf doesn't incorrectly report that the
superblocks are wrong during assemble.
Signed-off-by: NeilBrown <neilb@suse.de>
As chunk_size in mdstat_ent is never set, we shouldn't copy
it into a->info.array.
In fact, it is safest to get rid of the field altogether.
Reported-by: "Kwolek, Adam" <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
We shouldn't call remove_partitions until we have made a really firm
decision to include the device into the array.
Signed-off-by: NeilBrown <neilb@suse.de>
If adding a bitmap fails with EBUSY, then it is because the array is
currently resyncing/recovering/reshaping.
As this is non-obvious, give a message explaining the fact.
Signed-off-by: NeilBrown <neilb@suse.de>
We already allow K,M,G suffixes for --size and --array-size.
Allow it for --chunk and --bitmap-chunk as well.
Also add this info to man page, and remove the duplication of info
about --array-size.
Signed-off-by: NeilBrown <neilb@suse.de>
number of backup blocks evaluation is put in to function for code reuse.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
fd handles table creation is put in to function for code reuse.
In manage_reshape(), child_grow() function from Grow.c will be reused.
To prepare parameters for this function, code from Grow.c can be
reused also.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Assumption for spares searching was that after picking new device, it
has to be added to array before next search. This causes returning
different disk on each call.
When creating a spare list during Online Capacity Expansion, we will
first collect the devices list and then all devices are added to md.
Picked device from spares pool has to be checked against picked
devices so far. If not, the same disk will be returned all the time.
Already picked devices are stored in the list and this list is used
for new devices verification also.
So add an extra arg to imsm_add_spare to hold a list of known
spares to ignore.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Wrong number of disks during metadata update causes core dump. New
disks number based on internal mdmon information has to used for
calculation (not previously read from metadata).
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Internal IMSM procedures need to support the General Migration.
It is used during operations like:
- Online Capacity Expansion,
- migration initialization,
- finishing migration,
- apply changes to raid disks etc.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Due to fact that IMSM Windows compatibility was not tested yet,
feature has to be treated as experimental until compatibility
verification will be performed.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Until now Raid10->Raid0 takeover was possible only if all the mirrors
where removed before md starts the takeover. Now mdadm, when
performing Raid10->raid0 takeover, will remove all unwanted mirrors
from the array before actual md takeover is called.
Signed-off-by: Maciej Trela <maciej.trela@intel.com>
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Also not that the leading '-' on the metadata names now
simply means that mdmon must not reconfiure the array.
Signed-off-by: NeilBrown <neilb@suse.de>
If a degraded array disappears we still have it in statelist
with active<raid but it is pointless to look for spares for it.
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
If /var/run/mdadm doesn't exist we can never succeed writing
so we should try to create it first. When we make sure it is there we
write pid file as before.
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: linux-raid@vger.kernel.org, Williams, Dan J <dan.j.williams@intel.com>, Ciechanowski, Ed <ed.ciechanowski@intel.com>
Otherwise spare will be considered good anyway.
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
For consistency with makedev().
int is not sufficient.
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>