Allow per-device "failfast" flag to be set when creating an
array or adding devices to an array.
When re-adding a device which had the failfast flag, it can be removed
using --nofailfast.
failfast status is printed in --detail and --examine output.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This patch tries recreates missing/faulty journal in mdadm.
Example:
./mdadm --fail /dev/md1 /dev/sdb2
mdadm: set /dev/sdb2 faulty in /dev/md1
./mdadm --stop /dev/md1
mdadm: stopped /dev/md1
./mdadm -A --scan --force
mdadm: Journal is missing or stale, starting array read only.
mdadm: /dev/md/1 has been started with 15 drives.
./mdadm --add-journal /dev/md1 /dev/sdb2
mdadm: added /dev/sdb2
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Specify the write journal device with --write-journal DEVICE
./mdadm --create -f /dev/md0 --assume-clean -c 32 --raid-devices=4 --level=5 /dev/sd[c-f] --write-journal /dev/sdb1
mdadm: Defaulting to version 1.2 metadata
mdadm: array /dev/md0 started.
Only one journal device is allowed. If multiple --write-journal
are given, mdadm will use the first and ignore others
./mdadm --create -f /dev/md0 --assume-clean -c 32 --raid-devices=4 --level=5 /dev/sd[c-f] --write-journal /dev/sdb1 --write-journal /dev/sdx
mdadm: Please specify only one journal device for the array.
mdadm: Ignoring --write-journal /dev/sdx...
mdadm: Defaulting to version 1.2 metadata
mdadm: array /dev/md0 started.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
This extends nodes option for assemble mode, make the num of
cluster node could be change by user.
Before that, it is necessary to ensure there are enough space
for those nodes, calc_bitmap_size is introduced to calculate
the bitmap size of each node.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.de>
A clustered disk is added by the traditional --add sequence.
However, other nodes need to acknowledge that they can "see"
the device. This is done by --cluster-confirm:
--cluster-confirm SLOTNUM:/dev/whatever (if disk is found)
or
--cluster-confirm SLOTNUM:missing (if disk is not found)
The node initiating the --add, has the disk state tagged with
MD_DISK_CLUSTER_ADD and the one confirming tag the disk with
MD_DISK_CANDIDATE.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.de>
The home-cluster is stored in the bitmap super block of the
array. The device can be assembled on a cluster with the
cluster name same as the one recorded in the bitmap.
If home-cluster is not specified, this is auto-detected using
dlopen corosync cmap library.
neilb: allow code to compile when corosync-devel is not installed.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Specifies the maximum number of nodes in the cluster that may use
this device simultaneously. This is equivalent to the number of
bitmaps created in the internal superblock (patches to follow).
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Sometimes mdadm prints messages with wrong name "mdmon",
and vice versa.
This patch solves this problem by changing method of determining
process name.
Now "Name" will be set in const at start of a program,
previously was hardcoded as #define.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
--add-spare is like --add, but a --re-add is never attempted.
So it is equivalent to two separate commands:
--zero-metadata
--add
Signed-off-by: NeilBrown <neilb@suse.de>
If being built from a git tree, use the version and date
information from the top commit rather than the hard-coded
values.
Signed-off-by: NeilBrown <neilb@suse.de>
This allows the metadata on a device to be saved and later restored.
This can be useful before experimenting on an array that is misbehaving.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
We still allow --offroot to be given - for compatibility with scripts
- but ignore it.
The whole point of --offroot is to get systemd to not auto-kill mdmon,
and we always want that.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
--replace can be used to replace a device without completely failing
it. Once the replacement completes the device will be failed.
--with can indicate which of several spares to use.
Signed-off-by: NeilBrown <neilb@suse.de>
This can be used to over-ride the automatic assignment of
data offset.
For --create, it is useful to re-create old arrays where different
defaults applied.
For --grow it may be able to force a reshape in the reverse direction.
Signed-off-by: NeilBrown <neilb@suse.de>
As we don't allow '-K' for '--zero-super' there is no point
using it internally. Just define a 'KillOpt' like with
other options.
Signed-off-by: NeilBrown <neilb@suse.de>
Both --detail and --monitor can report the names of member
devices on an array, and do so by searching /dev and finding
the shortest name that matches.
If
--prefer=foo
is given, they will instead prefer a name that contain /foo/.
So
mdadm --detail /dev/md0 --prefer=by-path
will list the component devices via their /dev/disk/by-path/xxx
names.
Signed-off-by: NeilBrown <neilb@suse.de>
When --offroot is specified, mdadm will change the first character of
argv[0] to '@'. This is used to signal to systemd that mdadm was
launched from initramfs and should not be shut down before returning
to the initramfs.
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
To allow for reshape continuation '--continue' option is added
to grow command.
Function that will be executed in grow-continue case doesn't require
information about reshape geometry. All required information are read
from metadata.
For external metadata reshape can be run for monitored array/container
only. In case when array/container is not monitored run mdmon for it.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
During initrd phase continuing reshape will cause file system context
lost. This blocks ability to control reshape using checkpoints.
To avoid this, during initrd phase assemble has to be executed with
'--freeze-reshape' option. This causes that mdadm restores reshape
critical section only.
Reshape can be continued later after system full boot.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This was #if-ed out for 3.0, but it really should go.
Gcc 4.6.0 complains that auto_update_home is set but not used
(which is true).
Reported-by: Tobias Powalowski <t.powa@gmx.de>
Hi Neil,
I noticed that the -Y option, as in mdadm -D -Y /dev/md0, doesn't work
but used as --export it works.
So I made a little patch to fix it, but it is simply sticking a Y in the
list of short_options in ReadMe.c.
Signed-off-by: NeilBrown <neilb@suse.de>
Neil,
Please consider this patch that once was discussed and I think agreed with in general direction. It was sent a while ago
but somehow did not merged into your devel3-2. This patch enables hot-plug of so called bare devices (as understand by domain policies rules in mdadm.conf).
Without this patch we do NOT serve hot-plug of bare devices at all.
Thanks,
Marcin Labun
Subject was: FW: Autorebuild, new dynamic udev rules for hot-plugs
>>From c0aecd4dd96691e8bfa6f2dc187261ec8bb2c5a2 Mon Sep 17 00:00:00 2001
From: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@intel.com>
Date: Thu, 23 Dec 2010 16:35:01 +0100
Subject: [PATCH] Dynamic hot-plug udev rules for policies
Cc: linux-raid@vger.kernel.org, Williams, Dan J <dan.j.williams@intel.com>, Ciechanowski, Ed <ed.ciechanowski@intel.com>
When introducing policies, new hot-plug rules were added to support
bare disks. Mdadm was started for each hot plugged block device
to determine if it could be used as spare or as a replacement member for
degraded array.
This patch introduces limitation of range of devices that are handled
by mdadm.
It limits them to the ones specified in domains associated with
the actions: spare-same-port, spare and spare-force.
In order to enable hot-plug for bare disks one must update udev rules
with command
mdadm --activate-domains[=filename]
Above command writes udev rule configuration to stdout. If 'filename'
is given output is written to the file provided as parameter. It is up
to system administrator what should be done later. To make such rule
permanent (i.e. remain after reboot) rule should be writen to
/lib/udev/rules.d directory. Other cases will just need to write it to
/dev/.udev/rules.d directory where temporary rules lies. One should be
aware of the meaning of names/priorities of the udev rules.
After mdadm.conf is changed one is obliged to re-run
"mdadm --activate-domains" command in order to bring the system
configuration up to date.
All hot-plugged disks containing metadata are still handled by existing
rules.
Signed-off-by: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Though not having the proper backup file can cause data corruption, it
is not enough to justify not being able to start the array at all.
So allow "--invalid-backup" to be specified which says "just continue
even if a backup cannot be restored".
Signed-off-by: NeilBrown <neilb@suse.de>
In several cases, two different long options map to the same short
option. So e.g. you could give '--brief' and it would be interpreted
as '--bitmap'. That isn't really good.
So for every shared short option, define an option number and return
that for the long option instead. Then always check for both the
short and long options.
Also give some bugs like " mode == 'G'" which should be '== GROW'.
Signed-off-by: NeilBrown <neilb@suse.de>