32 bit signed timestamps will overflow in the year 2038.
Change the user interface mdu_array_info_s structure timestamps:
ctime and utime values used in ioctls GET_ARRAY_INFO and
SET_ARRAY_INFO to unsigned int. This will extend the field to last
until the year 2106.
Add time_after/time_before and supporting typecheck from
the kernel to take care of unsigned time wraparound.
The long term plan is to get rid of ctime and utime values in
this structure as this information can be read from the on-disk
meta data directly.
v0.90 on disk meta data uses u32 for maintaining time stamps.
So this will also last until year 2106.
Assumption is that the usage of v0.90 will be deprecated by
year 2106.
Timestamp fields in the on disk meta data for v1.0 version already
use 64 bit data types.
Signed-off-by: NeilBrown <neilb@suse.com>
In Assemble, getinfo_super() over-writes journal_clean. To
ensure correct journal_clean, keep it in a local variable
before getinfo_super().
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
In kernel space, r5l checksum will use crc32c:
http://marc.info/?l=linux-raid&m=144598970529191
mdadm need to change too.
This patch ports a simplified crc32c algorithm from kernel code,
and used in super1.c:write_empty_r5l_meta_block();
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
As discussed, standalone require_journal() in struct superswitch
is not a very good idea. Instead, journal related information
fits well in struct mdinfo.
This patch simplifies journal support code in Assemble and
Incremental as:
- Add journal_device_required and journal_clean to struct mdinfo;
- Remove function require_journal from struct superswitch;
- Update Assemble and Incremental to use journal_device_required
and journal_clean from struct mdinfo (instead of separate var).
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Let libcmap lib and related funs also only need one-time
setup during mdadm running period.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Modifying an exiting device's superblock or creating a new superblock
on an existing device needs to be checked because the device could be
in use by another node in another array. So, we check this by taking
all superblock locks in userspace so that we don't step onto an active
device used by another node and safeguard against accidental edits.
After the edit is complete, we release all locks and the lockspace so
that it can be used by the kernel space.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
If journal device is missing, do not start the array, and shows:
./mdadm -I /dev/sdf
mdadm: journal device is missing, not safe to start yet.
The array will be started when the journal device is attached with -I
./mdadm -I /dev/sdb1
mdadm: /dev/sdb1 attached to /dev/md/0_0, which has been started.
To force start without journal device:
./mdadm -I /dev/sdf --run
mdadm: Trying to run with missing journal device
mdadm: /dev/sdf attached to /dev/md/0_0, which has been started.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Example output:
./mdadm --assemble /dev/md0 /dev/sd[c-f] /dev/sdb1
mdadm: /dev/md0 has been started with 4 drives and 1 journal.
mdadm checks superblock for journal devices. If the journal device
is missing or faulty, mdadm will show warning
./mdadm --assemble /dev/md0 /dev/sd[c-q] /dev/sdb1
mdadm: Not safe to assemble with missing or stale journal device, consider --force.
User can insist to start the array (read only) with --force
./mdadm --assemble /dev/md0 /dev/sd[c-q] /dev/sdb1 --force
mdadm: Journal is missing or stale, starting array read only.
mdadm: /dev/md0 has been started with 15 drives.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Specify the write journal device with --write-journal DEVICE
./mdadm --create -f /dev/md0 --assume-clean -c 32 --raid-devices=4 --level=5 /dev/sd[c-f] --write-journal /dev/sdb1
mdadm: Defaulting to version 1.2 metadata
mdadm: array /dev/md0 started.
Only one journal device is allowed. If multiple --write-journal
are given, mdadm will use the first and ignore others
./mdadm --create -f /dev/md0 --assume-clean -c 32 --raid-devices=4 --level=5 /dev/sd[c-f] --write-journal /dev/sdb1 --write-journal /dev/sdx
mdadm: Please specify only one journal device for the array.
mdadm: Ignoring --write-journal /dev/sdx...
mdadm: Defaulting to version 1.2 metadata
mdadm: array /dev/md0 started.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Replace special disk roles (0xffff, 0xfffe) with macros:
define MD_DISK_ROLE_SPARE 0xffff
define MD_DISK_ROLE_FAULTY 0xfffe
Will add macro for journal device in next patch:
define MD_DISK_ROLE_JOURNAL 0xfffd
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Calling abort_reshape() in imsm_manage_reshape() is unnecessary in case
of an error because it is handled by reshape_array(). Calling it when
reshape completes successfully is also unnecessary and leads to a race
condition:
- reshape ends
- mdadm calls abort_reshape() -> sets sync_action to idle
- MD_RECOVERY_INTR is set and md_reap_sync_thread() does not finish the
reshape
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Konrad Dabrowski <konrad.dabrowski@intel.com>
Signed-off-by: NeilBrown <neilb@suse.com>
If sysfs node existed, we should try to write "re-add" to it.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
If it is a cluster raid, the disc.state need to be
changed accordingly when do re-add.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Commit 06bd679317 ("Skip clustered devices in incremental")
disabled incremental completely on clustered arrays.
What we really want is that mdadm should not start or create
a clustered array but still be able to add or readd to an existing
device. This would enable udev scripts to automatically add
or re-add a device after transient errors.
Signed-off-by: NeilBrown <neilb@suse.com>
We currently have no synchronization techniques for the bad
block log, so disable it for the cluster.
Reported-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Add BITMAP_MAJOR_CLUSTERED as 5, in order to prevent older kernels
to assemble a clustered device.
In order to maximize compatibility, the major version is set to
BITMAP_MAJOR_CLUSTERED *only* if the bitmap is clustered.
Also, added MD_FEATURE_CLUSTERED in order to return error
for older kernels which would assemble MD in case bitmap is
corrupted.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Some rules do their own tracing and so aren't affected
by -s.
So add a test for -s in MAKE_FLAGS and avoid echo when present.
Signed-off-by: NeilBrown <neilb@suse.com>
Previous patch missed on case.
Also print more useful information when rejecting
a device with IMSM metadata.
Signed-off-by: NeilBrown <neilb@suse.com>
This does make mdassemble a bit bigger, but it also means
it actually works properly with named arrays.
Ref: https://bbs.archlinux.org/viewtopic.php?id=198196
Signed-off-by: NeilBrown <neilb@suse.com>
If someone has an IMSM array, and disables RAID in the BIOS
and uses the devices for some other purpose, then they really don't
want mdadm to start syncing the array.
So don't assemble if OROM doesn't confirm it is OK.
There can still be problems for crash-dump not being able to find
the OROM. Some explicit work-around might be needed for that
rather than a more general workaround that can corrupt data.
Signed-off-by: NeilBrown <neilb@suse.com>
This does make mdassemble a bit bigger, but it also means
it actually works properly with named arrays.
Ref: https://bbs.archlinux.org/viewtopic.php?id=198196
Signed-off-by: NeilBrown <neilb@suse.com>
mdassemble is meant to be small an simple, so avoid
trying to check for a cluster.
Currently it doesn't, but it still includes the code,
which doesn't build because the library isn't provided.
So just exclude the get_cluster_name code from mdassemble.
Signed-off-by: NeilBrown <neilb@suse.com>
Left align is better for cluster with name less than 64. Also
make the output of cluster name is aligned with others.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
When parse_cluster_confirm_arg return 0, it means the
arg are parsed successfully, so change !rv to rv.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
If someone has an IMSM array, and disables RAID in the BIOS
and uses the devices for some other purpose, then they really don't
want mdadm to start syncing the array.
So don't assemble if OROM doesn't confirm it is OK.
There can still be problems for crash-dump not being able to find
the OROM. Some explicit work-around might be needed for that
rather than a more general workaround that can corrupt data.
Signed-off-by: NeilBrown <neilb@suse.com>
The final completion of a recovery can be delayed, so use
sync_completed to check if it is finished, just not been reaped.
Signed-off-by: NeilBrown <neilb@suse.com>
sometimes the removed device is re-added before the writes
get all the way to the md device - so the array doesn't need
any recovery and the test fails.
So flush first to be safe.
Signed-off-by: NeilBrown <neilb@suse.com>
newer versions of mkfs.extX ask before creating a filesystem
on a device which appears to already have a filesystem.
We don't want that, so add the -F flag.
Also be explicit about fs type as one shouldn't depend on defaults.
Signed-off-by: NeilBrown <neilb@suse.com>