We want start_reshape to work no matter what the current values
of suspend_lo/suspend_hi are. So initialise suspend_lo very high
as this allows suspend_hi to be set to anything.
Signed-off-by: NeilBrown <neilb@suse.de>
When raid0 array is takeovered to raid4 for reshape it should be possible to detect
that array for reshape is monitored now for metadata update.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
As raid4 is not supported by imsm (this is takeovered raid0)
do not fix degraded raid4 arrays.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
After raid0 reshape is finished backward takeover has to be executed.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
For level migration support it is necessary to allow mdmon to react for level changes.
It has to have ability to change configuration of active array,
and for array level change to raid0 finish array monitoring.
Signed-off-by: Maciej Trela <maciej.trela@intel.com>
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When raid0 reshape is performed metadata has to be applied by mdadm.
(without mdmon)
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
For code reuse in raid0 reshape case when monitor is not loaded.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When user wants to add spares to container with raid0 arrays only
it is not possible to update metadata due to lack of running mdmon.
To allow for this direct metadata update by mdadm is used in such case.
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When second array reshape is about to start metadata should be updated
by mdmon in imsm_set_array_state().
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When new disks are added array size has to be set by mdadm as array grows.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When disks are added size has to increase in metadata.
This size should be used by common code to set size in md when reshape will be finished.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
For general migration function blocks_per_migr_unit() has to return valid value.
If there is no valid return, 0 is returned instead and causes division by 0 error.
Additionally guard in function was added for such case.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When reshape is finished monitor calls set_array_state() and finishes migration in metadata.
This change allows for finishing metadata migration on reshape end.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
For external metadata parameters has to be changed via sysfs.
i.e. change of raid_disks requires handshake mdmon<->md (md_allow_write())
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Add support for reading volume information during migration process.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
During first metadata update imsm for compatibility reason should update
only one array.
Buffers in prepare_update() are prepared for second update as well.
Signed-off-by: NeilBrown <neilb@suse.de>
Metadata is not modified by metadata preparation handler.
It has to be read again from array.
There is 2 read required:
1. before 'for' entry to get updated information after reshape_super() call
2. inside 'for' loop to get updated information for every processed array
(it can happen /i.e. imsm case/ that container operation is a set of array operations
and information in metadata is changed after every loop).
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Meta data was not updated due to the following problems:
1.disk index < 0 was treated as invalid, but this is spare device
2. disk index greater than currently used disks is correct also
3. newmap pointer has to be refreshed for second map copy operation
4. size calculation has to be guarded for shrinking operation
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When container operation is not allowed user has to get proper information on console about it
Currently this information was displayed as debug info only.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Correct information displayed by '-E' option.
1. FIX: Slot information during raid0 migration is displayed incorrectly
(missing disk position is taken from wrong map)
2. Improvement: information about (level, members, chunk size) migration is displayed.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Allow map related operations for the given map: first of second.
For reshape specific functionality it is required to have an access
Until now, the active map was chosen according to the current volume status.
Signed-off-by: Maciej Trela <maciej.trela@intel.com>
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Combine all the non-backing-up code into a single function:
progress_reshape. It is called repeatedly to monitor a
reshape and allow it to happen safely.
Have a single separate function 'child_monitor' which
performs backups of data and calls progress_reshape to
wait for the next backup to be needed.
Signed-off-by: NeilBrown <neilb@suse.de>
Significant rewrite/refactor of Grow_reshape to make it easier to work
with externally-managed-metadata.
This patch it too big, but we'll just have to live with that.
Signed-off-by: NeilBrown <neilb@suse.de>
By default Incremental places all imsm spares in separate container
with uuid=0:0:0:0. (patch giving spares uuid_zero needed)
When we find enough members to start an array
we are able to determine domain so we search spare container
for suitable spares and move them to the container that
is currently assembled.
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
container_chose_spares in Monitor.c and
get_spares_for_grow in super-intel.c
do the same thing: search for spares in a container.
Another version will also be needed for Incremental
so a more general solution is presented here and
applied in two previous contexts.
Normally domlist==NULL would lead an empty list but
this is typically checked earlier so here it is interpreted
as "do not test domains".
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
If we find spares but no members of given array
we create container with just spares.
This allows auto assemble to pick up all lose imsm spares when there
is no config file.
When there is a valid config file and any array is assembled from it
we don't try auto assembly so we will not assemble spares that don't
match any array.
To remedy this we must add
ARRAY metadata=imsm UUID=00000000:00000000:00000000:00000000
to config file.
This container will include all remaining spares.
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Policy must be read on all disks identified as array members
to get array's domains list.
Currently it is only read on first array member in auto assembly mode.
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
mdinfo read with sysfs_read do not contain information about the space
needed to store data of all volumes created in that container, so that
spare can be used as replacement for existing subarrays in the future.
Signed-off-by: NeilBrown <neilb@suse.de>
If lost disk was the only one that belonged to particular domain, array
won't match with that domain any longer. We can achieve this by moving
domain check below the 'target' test.
Signed-off-by: NeilBrown <neilb@suse.de>
spare-same-slot allows re-adding of missing array member with disk
re-inserted into the same slot where previous member was plugged in.
If in the meantime another spare has been used for recovery, same slot
cookie should be ignored.
Signed-off-by: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Container degradation here is defined as the number of failed disks in
mostly degraded sub-array. This number is used as value for
array.failed_disks and used in comparison to find best match.
Signed-off-by: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Imsm spare will only be taken if it matches domain of
identified members of currently assembled array.
This implies that:
- spare with null domain will match first array assembled.
- if array has null domain then no spare will match
If we allow spares to set st they may block assembly of subarrays.
This is because in auto-assembly tmpdev->used=0 for a spare not matching
any array. If we find such spare before container and set st, the content
will not get assembled.
We allow uuid_zero match any uuid in assembly as unsuitable spares will
be rejected on domain check.
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
uuid_match_any is replaced by uuid_zero for imsm spares.
Function fixup_container_spare_uuid not needed as it gives
unwanted uuid to spares.
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Patch provides set of tests for On-line Capacity Expansion,
takeover, migrations operations for imsm metadata type.
Tests are grouped by operation type:
12 - On-line Capacity Expansion on one volume
13 - On-line Capacity Expansion on two volumes
14 - Negative tests for takeover, migrations
15 - Chunk size migrations
16 - raid0 -> raid5, raid5 -> raid0 migrations
18 - takeover operations
To run particular test group, following command should be executed:
(from mdadm's source code root directory)
./test <group number>
Example:
To run On-line Capacity Expansion on one volume tests:
./test 12
Tests execution results:
- In case of test pass, "succeeded" word is printed on console
- If test is failed, "FAILED" word is printed on console
and logs are stored in <mdadm-root-dir>/tests/log/ directory
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
We need to refuse to assemble an arrays with bad blocks.
Initially there was condition in container_content function
that returns error value in the case when metadata store information
about bad blocks.
When the container_content function is called from functions NOT connected
with assemble (Kill_subarray, Detail) we get faulty error return value.
Patch introduces new flag in array.status - MD_SB_BBM_ERRORS. It is set
in container_content when bad blocks are detected and can be checked by
container_content caller.
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This value is passed in by caller so we should not be
freeing it.
Reported-by: "Wojcik, Krzysztof" <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
return value should remain the same as result of Manage_Subdevs (last
significant operation). Right now it is inverted what results in
error status for successful operation.
Signed-off-by: NeilBrown <neilb@suse.de>
After incremental has added spare, monitor should be woken up in order
to see if anything has changed. If mdmon is not waken up, recovery do not
start.
Signed-off-by: NeilBrown <neilb@suse.de>
Destination arrays that do not have any domains are excluded
from spare sharing. We can check it early, without searching
for donor arrays.
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
delta_disks field is not always filled during getinfo_super() call.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
If reshape is started resync is not allowed in parallel. This would
break reshape. If array is in General Migration state do not indicate
resync and allow for reshape continuation.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
We need to allow metadata to handle progress of reshape,
completion, and abort-before-start.
Include all those in ->set_array_state()
Signed-off-by: NeilBrown <neilb@suse.de>
Array state change is blocked due to reshape action in progress
metadata changes are during applying.
'1' is returned to indicate that array is clean
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
NeilBrown
Adam Kwolek
Krzysztof Wojcik
Anna Czarnowska
Przemyslaw Czarnowski
Marcin Labun