/dev could be read-only in which case we cannot make devices
there.
So dev_open should first try to use an existing device name,
and if that doesn't work try creating a node in /dev or /tmp.
Reported-by: Paweł Sikora <pluto@agmk.net>
Signed-off-by: NeilBrown <neilb@suse.de>
Commit 3a6ec29ad5 stopped us from adding apparently-working devices
to an active array with --incremental as there is a good chance that they
are actually old/failed devices.
Unfortunately it also stopped spares from being added to an active
array, which is wrong. This patch refines the test to be more
careful.
Reported-by: <fibreraid@gmail.com>
Analysed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Commit 3288b419 (Revert "Incremental: honor --no-degraded to delay assembly")
killed the --no-degraded flag since commit 97b4d0e9 (Incremental: honor
an 'enough' flag from external handlers) made this the default behavior
of -I, and brought -I usage for external/container formats in line with
native metadata. However, this breaks existing usages of '-I
--no-degraded', so allow it as a deprecated option.
Starting a degraded container, like the native metadata case, requires -R.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Ignacy Kasperowicz <ignacy.kasperowicz@intel.com>
Commit 97b4d0e9 "Incremental: honor an 'enough' flag from external
handlers" introduced a regression in that it changed the error return
code for successful invocations.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Ignacy Kasperowicz <ignacy.kasperowicz@intel.com>
Having multiple possible locations and guessing where best to put the
file is too messy, confusing and makes locking problematic.
So just keep it in /dev/.mdadm/map. It is a horrible place but it is
really all we have. System integrators can change this easily at
build time.
Signed-off-by: NeilBrown <neilb@suse.de>
nr_disks is just wrong here - the arrays need room for all disk slots,
even if some are empty, plus spares, plus a possible backup file.
So raid_disks is correct.
Signed-off-by: NeilBrown <neilb@suse.de>
There 'rv' tests were confused and sometimes wrong.
This resulted in not writing the second bsb.
Also fix the test script so the the critical section is long enough
that we have some hope of interrupting it.
Signed-off-by: NeilBrown <neilb@suse.de>
The loop for loading it was hard to follow, so restructure that
and avoid a theoretical use-before-set error.
Also there was a second 'info' structure which hid the first and was
pointless.
Signed-off-by: NeilBrown <neilb@suse.de>
The 'container_enough' changes fliped the default from assembling
an array as soon as we possibly could, to assembling only when all
expected devices are present.
This broken 09imsm-assemble which expects the original default.
So change from "-I" to "-IR" to restore the expected behaviour.
Signed-off-by: NeilBrown <neilb@suse.de>
The container_enough code change broke ddf as ddf never claimed
'enough' devices. So change it to always claim 'enough' to
restore previous behaviour.
Signed-off-by: NeilBrown <neilb@suse.de>
1/ and extra local var was declared, which causes rv setting
to be lost
2/ a -ve rv was left -ve while we should be return 1 on err.
Signed-off-by: NeilBrown <neilb@suse.de>
- Update the comments
- use some defined names instead of magic numbers.
- restore /var/run/mdadm/map to have priority over /dev/.mdadm/map
Signed-off-by: NeilBrown <neilb@suse.de>
It turns out that /lib/init/rw doesn't exist in early boot
like I thought. So give up on that idea and just use
/dev/.mdadm/ for files that must persist from early-boot
to regular boot.
Signed-off-by: NeilBrown <neilb@suse.de>
While we attempt to use a lockfile to grant exclusive access to the
mapfile, our implementation is buggy. Specifically, we create a lockfile,
then lock it, at which point new instances can open the lockfile and
attempt to lock it, which will cause them to block. However, when we are
ready to unlock it, we unlink the file. This causes existing lock waiters
to get a lock on an unlinked inode while a different instance may now
create a new lockfile and get an exclusive lock on it.
There are several possible fixes. The chosen one is to test if
->s_nlink is zero after we get the lock and to retry if it isn't.
This means:
- failing to unlink a file doesn't leave a stale lock
- we can block waiting to get a lock rather than busy-waiting
- we don't need to leave a lock file permanently in place.
Reported-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
The watch option to udev tells udev to watch our mdadm device file for
close events and on a close it rechecks the device. This means that if,
for example, we use mdadm to --grow the array from a 4 disk to 5 disk
array, when mdadm closes the array, udev will re-read the superblock and
update its internal database with the new information. This can also be
used to cause udev to create new device special files if, for example, a
partitioning program is used to modify the partition table on the actual
md device and that program does not call the syscall to reread the
partition table.
Signed-off-by: Doug Ledford <dledford@redhat.com>
One: a single character typo (of instead of or in an error printout)
Two: Audited usage of tfd file descriptor. Make sure that the tfd file
is always closed after usage, and that the tfd variable is reset to -1
if we are going to continue in our loop (not necessary if we know we
will return from our function without going through the dv loop again).
Signed-off-by: Doug Ledford <dledford@redhat.com>
We now have 3 directory definitions: mdmon directory for its pid and
sock files (compile time define, not changable at run time), mdmonitor
directory which is for the mdadm monitor mode pid file (can only be
passed in via command line at the time mdadm is invoked in monitor mode),
and the directory for the mdadm incremental assembly map file (compile
time define, not changable at run time). Only the mdadm map file still
hunts multiple locations, and the number of locations has been reduced
to /var/run and the compile time specified location. Re-use of similar
sounding defines that actually didn't denote their actual usage at
compile time made it more difficult for a person to know what affect
changing the compile time defines would have on the resulting programs.
This patch renames the various defines to clearly identify which item
the define affects. It also reduces the number of various directories
which will be searched for these files as this has lead to confusion
in mdadm and mdmon in terms of which files should take precedence when
files exist in multiple locations, etc. It's best if the person
compiling the program intentionally and with planning selects the
right directories to be used for the various purposes. Which directory
is right depends on which items you are talking about and what boot
loader your system uses and what initramfs generation program your
system uses. Because of the inter-dependency of all these items it
would typically be up to the distribution that mdadm is being integrated
into to select the correct values for these defines.
Signed-off-by: Doug Ledford <dledford@redhat.com>
This number isn't meaningful for RAID0 as a different amount of space
might be used from each device.
It isn't meaningful for linear either, but already was not reported
for linear.
Detail doesn't report it either.
So make --examine not report it.
Signed-off-by: NeilBrown <neilb@suse.de>
Reported-by: Mario 'BitKoenig' Holbe <Mario.Holbe@TU-Ilmenau.DE>
When left-shifting we must be sure that the value being
shifted is large enough to not lose bits.
The 'chunkssize' in CreateBitmap is only 'long' so it
can overflow. So cast to 'long long' first.
Also fix a similar issue in Detail even though it isn't currently
being compiled.
Signed-off-by: NeilBrown <neilb@suse.de>
Reported-by: Tomasz Chmielewski <mangoo@wpkg.org>
GET_ARRAY_INFO always succeeds on an inactive container, so we need to
be a bit more diligent about adding a disk to an active container.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The 4K superblock can be as close as 64K from the end
of the device. As the bitmap (with header) lives after
the superblock (with 0.90 metadata) there could be as
little as 60K of space.
So limit the bitmaps to 59.5K, and only write 60K including
the header.
The bug fixed here means that bitmaps cannot be created
on devices which are exact multiples of 64K in size
Signed-off-by: NeilBrown <neilb@suse.de>
super-intel.c: In function ‘imsm_add_spare’:
super-intel.c:4833: error: ‘array_start’ may be used uninitialized in this function
super-intel.c:4834: error: ‘array_end’ may be used uninitialized in this function
This is valid, if we don't find a spare candidate then array_{start,end}
will be uninitialized.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Setting up a proper tls descriptor is required to conform to the abi
[1]. Until it can be implemented in mdmon use pthreads instead of
clone(2) to let glibc handle the details. The old behaviour can be had
by un-defining USE_PTHREADS.
Note, the "O2" builds need LDFLAGS now to pick up the '-pthread' option.
[1]: http://people.redhat.com/drepper/tls.pdf
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Correction of the number of container or volume member devices (devcnt
in struct mdstat_ent). The number after the last devices was counted
towards member of devices.
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
--test can be given in Manage mode.
This can be used when there is an attempt to fail or remove 'faulty',
'failed' or 'detached' devices, or to re-add 'missing' devices.
If no devices were failed, removed, or re-added, then mdadm will
exit with status '2'.
Signed-off-by: NeilBrown <neilb@suse.de>
If the device name "missing" is given for --re-add, then mdadm will
attempt to find any device which should be a member of the array but
currently isn't and will --re-add it to the array.
This can be useful if a device disappeared due to a cabling problem,
and was then re-connected.
The appropriate sequence would be
mdadm /dev/mdX --fail detached
mdadm /dev/mdX --remove detached
mdadm /dev/mdX --re-add missing
Signed-off-by: NeilBrown <neilb@suse.de>
Adding devices to active arrays in --incremental is a bit dubious.
Normally the array won't be activated until all expected devices are
present, so this situation would mean that the given device is not
expected, so is probably failed. In that case it should only be added
by explicit sysadmin request.
However if --run was given, then quite possibly the array was
assembled earlier when not complete, so it is less clear whether it is
wrong to add this device or not. In that case add it as that is
generally safest.
It would be nice to allow policy for this to be explicitly given by
sysadmin.
Signed-off-by: NeilBrown <neilb@suse.de>
commit 1ff9833928
broke the checking of metadata types via the 'auto' line.
Be moving 'load_super" before "conf_test_metadata" we left
tst->sb set even if conf_test_metadata fails, so the device will
actually be accepted and used.
So if we decide to reject the device, free the superblock so it is
clear that it is rejected.
Signed-off-by: NeilBrown <neilb@suse.de>
Current versions of glibc do not provide a useable interface to clone(2) as it
inflicts hidden dependencies on setting up a glibc specific tls
descriptor. The dynamic linker trips this dependency and causes mdmon
to intermittently fail to load. Resolving all dynamic linking prior to
starting the monitor thread appears to mitigate the issue but there is no
guarantee that another tls dependency will bite us later.
However, while the debate continues with the glibc maintainers it seems
prudent to keep this change. It ensures that we do not get into a
situation where the monitor thread needs to make a late allocation to
resolve a symbol.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When using 0.90 metadata, devices can be renumbered when
earlier devices are removed.
So when iterating all devices looking for 'failed' or 'detached'
devices, we need to re-check the same slot we checked last time
to see if maybe it has a different device now.
Reported-by: Jim Paris <jim@jtan.com>
Resolves-Debian-Bug: 587550
Signed-off-by: NeilBrown <neilb@suse.de>
- split the rules for handling components of array to be clearly
separate from rules for handling the arrays themselves.
- add call to "-If" when removing a device
- uncomment the --incremental call when adding a device.
Signed-off-by: NeilBrown <neilb@suse.de>
This can be used for hot-unplug. When a device has been remove,
udev can call
mdadm --incremental --fail sda
and mdadm will find the array holding sda and remove sda from
the array.
Based on code from Doug Ledford <dledford@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Allow kernel names like "sda" and "hdb1" to be used to
fail/remove devices from an array.
This is useful as after a device has been removed it can be difficult
to get the major/minor number.
Signed-off-by: NeilBrown <neilb@suse.de>
This allows finding the array which contains a given component.
Components are named using the kernel-internal string name such
as "sda1" or "hdb".
Don't return member arrays, only the contain that contains them.
Also tidy up the parsing of 'inactive' arrays in /proc/mdstat.
If we see 'inactive' we need to set 'in_devs' immediately as there
is no level coming.
Signed-off-by: NeilBrown <neilb@suse.de>