Use closedir() on dirp from opendir() to avoid resource leaking.
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This should be harmless, but lets be consistent and not try to close a
negative file descripter.
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Spare superblock doesn't depend on other spares in container.
When loading container metadata thunderdome
may pick a small disk for the champion. This will result in incorrect
interpretation of sizes of other disks in container when joint superblock
is returned. If any disk in container has the 2TB attribute set, the result
must have it set too.
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
If system is rebooted during rebuild, md driver changes sync_action
from 'recover' to 'idle' (during stopping all md devices).
If mdmon is still running then, it detects the change of sync_action state,
finishes rebuild and writes metadata to disks. After computer's restart
the RAID volume is in Normal state in OROM and rebuild seems to be finished.
After system's start-up RAID volume is in auto-read-only state
and metadata is in Dirty state. Rebuild seems to be finished but it is not.
Data is inconsistent (out-of-sync).
When mdmon detects the change of sync_action from 'recover' to 'idle',
it has to check if rebuild is really finished. Appropriate test was added.
Now mdmon examines each volume's member if it is being rebuilt.
Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When mdadm is compiled using e.g. 'everything' option, mdassemble
compilation is broken.
Change code to enable mdassemble compilation.
Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Put currently existing code for alignment correction in to function
imsm_component_size_aligment_check() and use it for align component size
to chunk size during volume size expansion operation.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Add support for setting max size for size change operation using
imsm_get_free_size() function for computing maximum available space.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Add function imsm_imsm_get_free_size() using part of code from function
reserve_space().
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Add metadata rollback specific code for imsm.
Let reshape_super() ability to differentiate metadata apply and rollback
actions.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Function reshape_super() guards metadata changes.
It is used to apply changes rollback in error case also.
As change (apply and rollback) can be not bi-directional reshape_super()
has to know if current action is metadata change that should be guarded
using metadata restrictions, or this is metadata rollback change
executed due to error occurrence.
In second case change has to be unconditional.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Add new meatdata update type imsm_update_size_change, and update metadata
for volume size expansion operation.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Patch adds ability to function imsm_analyze_change() for:
1. Detect size change request for volume operation.
2. Check and correct size for change.
3. Set new change kind to CH_ARRAY_SIZE
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Function imsm_num_data_members() returns wrong value for raid 1 and 10.
It returns all data member but it should return number of unique data
members (excluding mirror devices)
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Display maximum volumes per array and per controller
in --detail-platform command.
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This patch ensures metadata attribute is set correctly also for spares.
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Creation of a container using disks over 2TB should be allowed only when orom supports large disks
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When orom does not support volumes over 2TB the creation should be disallowed
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
no point calling info_to_blocks_per_member when it just returns size*2 for level==1
calc_array_size can be used for all levels
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Functions retrieving sizes from metadata do not need to check
2TB attribute only when we can guarantee the hi bits are always
clear when the MPB_ATTR_2TB_DISK attribute is not set.
Therefore the following fields are cleared on metadata load
when not in use according to attribute:
struct imsm_disk.total_blocks_hi
struct imsm_map.pba_of_lba0_hi
struct imsm_map.blocks_per_member_hi
struct imsm_map.num_data_stripes_hi
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Calculating array_blocks using info->size causes error on activation of
volume using disks over 1 TB. unsigned long long size parameter
is used instead.
total_blocks, pba_of_lba0, blocks_per_member and num_data_stripes overflow
when using disks over 2TB.
Part of fillers in metadata is used to contain hi bits of the numbers
that are likely to go over 32 bit limit.
Functions are added to get and set such fields as the hi bits are not
adjacent with low bits in the structures.
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When OLCE is in progress, checkpoint steps are getting bigger due to added space during process.
When mdadm fails after saving "max" to sync_max, mdmon will monitor process
and switch reshape to next array. At this moment we have got information
inconsistency between metadata and migration record.
To avoid this, clear migration record by mdmon /exception from the rule
that migration record is maintained by mdadm/ when reshape switches
to next array.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When reshape is broken it can occur that metadata is not saved properly.
This can cause that reshape process is farther in md than metadata states.
On restart save checkpoint to store current position /probably farther/
that can be read from md.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When chunk size migration occurs (e.g. 128k->4k) first checkpoint cannot
be set in md due to too small step. Correct migration record initialization
to allow whole copy area usage and increase migration checkpoint step.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When during incremental assembly general migration is in progress,
starting degraded array causes that no more disks (even present)
can be added later as array is already started.
Request all previously present disks during general migration for assembly.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Fix the case with creating an array with given container in command line
instead of real devices:
mdadm -CR /dev/md/raid0 -l 0 -n 2 -z5G /dev/md/imsm
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
IMSM OROM limits number of volumes per controller. Volumes
above the limit are blocked in OROM. mdadm should follow OROM limitations
in this area. Therefore we need to count number of volumes on the devices
attached to SATA (ahci driver) or SAS (isci) controller. Adding a new volume
must be blocked if the number of volumes on devices attached to the given
controller is exceeded.
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This option is going to be used to load and analyse the metadata from
devices. This is needed to count the number of volumes on devcies attached
to particular Intel controller (SATA or SAS). It shall be done without
activation of container and volumes on the devices.
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Prepare function for subsequent changes related to
loading metadata from devices list.
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
The printed messages should be more appropriate and understandable
for user. If maxsize is equal 0, this means there is no free space left
on device. If size is greater than maxsize, this means there is not enough
space to create a new volume of given size.
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Make test for all sub arrays having the same number of devices
dependant on the option ROM requirements being checked.
08imsm-overlap disables the OROM check but then fails because this
test causes it to.
Reported-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This fields doesn't work any more as ->getinfo_super clears the info
structure at an awkward time. So get rid of it and do it differently.
The issue is that the metadata handler cannot tell if the uuid it has
was randomly generated or explicitly requested, except on the first
call.
And we don't want to accept explicit requests for IMSM.
So when it was auto-generated, make it look distinctive by having the
same int copied in all 4 positions. If someone requests a uuid like
that, I guess they get away with it.
Reported-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Chunk size only migration for raid0 and raid5 is not possible.
(mdadm UT 15* fails). Mdadm exits with information:
mdadm: imsm unknown layout 0xffffffff for this raid level 0
Problem was introduced in patch (2011-11-16):
imsm: platform capabilities are not validated during level migration
During chunk size migration layout variable is not set correctly.
Set it correctly for this migration type.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
load_imsm_migr_rec() should see difference between no migration record due
to no migration in progress and loading migration record error.
Additional return value (-2) was introduced to this function.
Using new status load_super_imsm_all() can correctly check loading
migration record status.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
make everything doesn't compile (again) due to not used function warning
and uninitialized variable.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Add definition:
MIGR_REC_BUF_SIZE
MIGR_REC_POSITION
to super-intel.c and do not use magic numbers
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This patch is addition to patch:
"imsm: FIX: Limit migration record operation by disk slot not by index"
Location of migration record (2 first slots) should be taken on up to date
information. It is in first map.
Change slot verification to use first map only.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
imsm should store migration record in to 2 first disks in array.
This should be evaluated based on disk slots, not on disks index.
It is not guaranteed that indexes are equal to slots.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Maps should not be accessed using "magic numbers" /0, 1,-1/.
Add proper definitions and change all map access to use them.
Change present definitions /MAP_0/MAP_1/ to values already used
in code /0, 1, -1//
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When changes are made to 2nd map, slot in second map should be tested
instead first one /as change will be applied to second map).
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When missing device is handled for rebuild or initialization
end_migration() should be called to merge ords in case additional
degradation.
I've removed this call to end_migration() as it was called
for migration also.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Allow for marking failures in second map during rebuild and initialization
also (not during migration only)
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
During initialization disk failure can occur also. Add code for such case
in imsm_set_disk() to support such event.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Do not allow for spare device activation while rebuild is in progress,
when additional degradation occur.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Rework is needed to map state transition part to allow easier code reading.
After rework it is easy to find out what can happen in what map state
transition.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Jes Sorensen
Czarnowska, Anna
Lukasz Dorau
Adam Kwolek
Labun, Marcin
Williams, Dan J
NeilBrown