wait not only for the name to appear, but for it to refer to the
correct device.
Sometimes old symlinks left lying around can be confusing.
Signed-off-by: NeilBrown <neilb@suse.de>
If we are assembling an array in a container and it isn't complete
enough to start yet, then
- don't start mdmon
- don't say the array is started
- don't wait for the device to appear in /dev
Signed-off-by: NeilBrown <neilb@suse.de>
Use mddev_busy() as GET_ARRAY_INFO can succeed on 'clear' arrays.
Ran into this after an encountering a case where mdadm -Ss ended in
segfault (missing check for NULL return from map_by_devnum() in
sles11:Manage.c). So, tried to stop the array by hand with echo clear >
md/array_state, after which I could not reassemble since GET_ARRAY_INFO
was succeeding.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reshape with large chunk size can require a large stripe_cache.
We make this work when starting the reshape but not when
restarting at assemble time. So fix that.
Signed-off-by: NeilBrown <neilb@suse.de>
This is only significant for --assemble --force where some old
devices might be included into the array. If anything looks like
it isn't clean, the kernel will not allow a degraded array to be started.
Signed-off-by: NeilBrown <neilb@suse.de>
If any superblocks in a confused array had an event count of 0,
"mdadm -Af" would not update the event counts to assemble the array.
I don't remember why that text is there, and it has caused at least
one situation to be difficult to recover from. So remove the
test. --force means --force!
Signed-off-by: NeilBrown <neilb@suse.de>
1/ when we choose not to use a device, must set ->used to 2, not 1.
2/ When we give up on a member, clear st and content.
Signed-off-by: NeilBrown <neilb@suse.de>
We probably should pass a flag down saying 'this is auto-assembly',
but for now, if there is no identity information set, it must
be auto-assemble.
Signed-off-by: NeilBrown <neilb@suse.de>
Try to treat members of containers much like other arrays for
assembly.
We still look through the list of devices for a match (it will be
the container), then find the relevant 'info' and try to assemble
the array.
Signed-off-by: NeilBrown <neilb@suse.de>
Attempting to open(O_EXCL) each candidate device usually filters out all
busy raid components. However, containers do not behave like components
and will return container_content that may describe active member
arrays.
This patch just adds a function that will be used to check if a
container member is busy. It will be used shortly.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Factor out, from Incremental_container, the code for assembling an
array based on information extracted from a container. We will
shortly use this from Assemble too.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
In preparation for handling the container case where we may need to handle
a list of potential member arrays.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When a 'container' gets started, we need udev to notice, but the
kernel has no way of knowing that a KOBJ_CHANGE event is needed. So
send one directly via the 'uevent' sysfs attribute.
Also, uevents don't get generated when md arrays are stopped (prior to
2.6.28) so send 'change' events then too.
Signed-off-by: NeilBrown <neilb@suse.de>
We previously only updated /var/run/mdadm/map when starting an
array with --incremental. However we now make more use of
that file (to pass the dev name to udev) so always update it.
Signed-off-by: NeilBrown <neilb@suse.de>
This delays the create_mddev call even further in the case where
an array device name is given for --assemble. It is now delayed
until the 'name' of the array is also available.
We will shortly be feeding more information into the process of
creating array devices, so delay the creation. Still open them
early if the device already exists.
This involves making sure the autof flag is in the right place
so that it can be found at creation time.
Also, Assemble, Build, and Create now always close 'mdfd'.
Signed-off-by: NeilBrown <neilb@suse.de>
This reflect that fact that more often than not it is creating things
in /dev, and allows for a new open_mddev which does just that.
Signed-off-by: NeilBrown <neilb@suse.de>
Given an mdadm.conf like the following allow /dev/imsm and /dev/md/r1 to be
created by "mdadm -As".
DEVICES partitions
ARRAY /dev/imsm metadata=imsm auto=md UUID=b98f5dbe-aa859e7b-0e369b89-a80986d4
ARRAY /dev/md/r1 container=/dev/imsm member=0 auto=mdp UUID=3538e39c-b397c2e9-1aa031f9-2bc0eca4
spares=1
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Raid disk and disk number information is not relevant at the container
level, especially for imsm. So arrange for getinfo_super_imsm() to
always publish devices as spares and report the number of spares at
Assemble() time.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Made the mistake of recompiling the F9 mdadm rpm which has a patch to
remove -Werror and add "-Wp,-D_FORTIFY_SOURCE -O2" which turns on lots
of errors:
config.c:568: warning: ignoring return value of asprintf
Assemble.c:411: warning: ignoring return value of asprintf
Assemble.c:413: warning: ignoring return value of asprintf
super0.c:549: warning: ignoring return value of posix_memalign
super0.c:742: warning: ignoring return value of posix_memalign
super0.c:812: warning: ignoring return value of posix_memalign
super1.c:692: warning: ignoring return value of posix_memalign
super1.c:1039: warning: ignoring return value of posix_memalign
super1.c:1155: warning: ignoring return value of posix_memalign
super-ddf.c:508: warning: ignoring return value of posix_memalign
super-ddf.c:645: warning: ignoring return value of posix_memalign
super-ddf.c:696: warning: ignoring return value of posix_memalign
super-ddf.c:715: warning: ignoring return value of posix_memalign
super-ddf.c:1476: warning: ignoring return value of posix_memalign
super-ddf.c:1603: warning: ignoring return value of posix_memalign
super-ddf.c:1614: warning: ignoring return value of posix_memalign
super-ddf.c:1842: warning: ignoring return value of posix_memalign
super-ddf.c:2013: warning: ignoring return value of posix_memalign
super-ddf.c:2140: warning: ignoring return value of write
super-ddf.c:2143: warning: ignoring return value of write
super-ddf.c:2147: warning: ignoring return value of write
super-ddf.c:2150: warning: ignoring return value of write
super-ddf.c:2162: warning: ignoring return value of write
super-ddf.c:2169: warning: ignoring return value of write
super-ddf.c:2172: warning: ignoring return value of write
super-ddf.c:2176: warning: ignoring return value of write
super-ddf.c:2181: warning: ignoring return value of write
super-ddf.c:2686: warning: ignoring return value of posix_memalign
super-ddf.c:2690: warning: ignoring return value of write
super-ddf.c:3070: warning: ignoring return value of posix_memalign
super-ddf.c:3254: warning: ignoring return value of posix_memalign
bitmap.c:128: warning: ignoring return value of posix_memalign
mdmon.c:94: warning: ignoring return value of write
mdmon.c:221: warning: ignoring return value of pipe
mdmon.c:327: warning: ignoring return value of write
mdmon.c:330: warning: ignoring return value of chdir
mdmon.c:335: warning: ignoring return value of dup
monitor.c:415: warning: rv may be used uninitialized in this function
...some of these like the write() ones are not so trivial so save those
fixes for the next patch.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
For now, this means that the lack of a homehost doesn't always prevent
assembly.
Soon we will allow assembly anyway, but have different messages if
homehost isn't supported.
When we assemble an array, there are three different approaches
depending on whether metadata is internal or external, and on
kernel version.
Move all this to a common helper instead of duplicating in 3 places.
Signed-off-by: NeilBrown <neilb@suse.de>
The variety of approaches to 'add_disk' are factored out into
a separate function, and Incremental mode benefits by being
closer to supporting the assembly of containers.
Also remove the adding-to-array-data-structure out of sysfs_add_disk
and into add_disk.
And add some tests for --incremental mode to make sure we don't break it.
Signed-off-by: NeilBrown <neilb@suse.de>
Since we made free_super a superswitch call, we need to be careful
that st is non NULL before calling st->ss->free_super(st).
Also when updating byteorder there is a chance of a similar NULL
deref.
I want the metadata handler to have more control over the 'version',
particularly for arrays which are members of containers.
So discard st->text_version and instead use info->text_version
which getinfo_super can initialise.
If you have stacked arrays, then
mdadm -As --homehost=fred
should work but doesn't. It gets into an infinite loop!
So write some tests, and fix the bugs.
If two drives in a raid5 disappear at the same time, then "-Af"
will add them both in rather than just one and forcing the array
to 'clean'. This is slightly safer in some cases.
If an auto-assembly attempt failes because the array cannot be
opened or because the array has already been created, then we
get into an infinite loop.
Reported-by: Dan Pascu <dan@ag-projects.com>
Fixes-debian-bug: 396582
If they are for a partition and a whole device (common case)
they old message doesn't really cover the situation. So add
the "overlap" option to the text.
Also detect whether the device list was in mdadm.conf and
act accordingly.
Make -assemble a bit more resilient to finding strange
information in superblocks.
Don't claim newly added spares are InSync!! (don't know why that
code was ever in there)
As version-0.90 superblock don't record the superblock
offset, it is possible for overlapping partitions,
or a partition that starts on a 64K boundary in the whole device
to result in mis-detection - one partition or device might
be detected where the other was intended.
To avoid this awkward possibility, we reject assembly attempts
which seem to have two devices that are different but have the
same version-0.90 superblock.
To avoid this problem altogether, switch to version-1 metadata.
Signed-off-by: Neil Brown <neilb@suse.de>
From: Luca Berra <bluca@vodka.it>
glibc 2.4 is pedantic on ignoring return values from fprintf, fwrite and
write, so now we check the rval and actually do something with it.
in the Grow.c case i only print a warning, since i don't think we can do
anything in case we fail invalidating those superblocks (is should never
happen, but then...)
Signed-off-by: Neil Brown <neilb@suse.de>
This can be used to bootstrape homehost tagging.
If no arrays are found that are tagged, we look for any array
and tag it.
Signed-off-by: Neil Brown <neilb@suse.de>
This cannot be used yet, but it is working towards auto-assembly.
When auto-assembling an array, we make a name in /dev/md/
giving a number (from the peferred minor) or name (from set-name).
Signed-off-by: Neil Brown <neilb@suse.de>
i.e. if assembling with --name or --super-minor, then if we find two
different arrays with the same apparent identity, and one was built
for 'this' host, then prefer that one instead of giving up in disgust.
Signed-off-by: Neil Brown <neilb@suse.de>
We make sure all devices can are consistent before doing any --update
This saves us from updating some but not all of an array, and then
aborting.
It also means we can backtrack on out decisions, which we might want to
do later.
Signed-off-by: Neil Brown <neilb@suse.de>
Use to avoid starting arrays if there are
fewer devices available than last time the array was started.
This is only needed with --scan, as with --scan, that behaviour
is the default.
Signed-off-by: Neil Brown <neilb@suse.de>
To support resizing an array without a spare, mdadm now understands
--backup-file=
which should point to a file for storing a backup of critical data.
This can be given to --grow which will create the file, or
--assemble which will restore from the file if needed.
Signed-off-by: Neil Brown <neilb@suse.de>
As spared don't have a position in the raid array with verion-1 superblocks,
we need to handle them a bit differently.
Signed-off-by: Neil Brown <neilb@suse.de>
This includes:
adding --metadata= option to choose metadata format
adding metadata= word to config file.
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
This allows for larger device number if glibc supports
it (requires 2.3.3).
Also fail before creating larger device number if glibc
support isn't present.
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>