The patch introduces takeover from level 10 to level 0 for imsm
metadata. This patch contains procedures connected with preparing
and applying metadata update during 10 -> 0 takeover.
When performing takeover 10->0 mdmon should update the external
metadata (due to disk slot and level changes).
To achieve that mdadm calls reshape_super() and prepare
the "update_takeover" metadata update type.
Prepared update is processed by mdmon in process_update().
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
We previously closed all 'fds' associated with an array in
write_init_super .. sometimes, and sometimes at bad times.
This isn't neat and free_super is a better place to close them.
So make sure free_super always closes the fds that the metadata
manager kept hold of, and stop closing them in write_init_super.
Also add a few more calls to free_super to make sure they really do
get closed.
Reported-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Function intended to use for single volume migration.
Function analyze transition and validate if it is supported.
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Function has been divided into two clear parts:
1. Container operations
2. Volume operations
Prototype of imsm_analyze_change function has been added.
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Field info->array.spare_disks is used on begin of reshape_array() to
check if there is enough number of spares to process reshape. During
container_content_imsm() call spare disks are not counted. This
causes that reshape_array() reports that there is not enough spares to
execute reshape.
Patch adds spares counting for reshape process.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When process_update() replaces memory for bigger devices, old memory
areas are collected in a list and has to be assigned in to pointer in
update for later release.
List created from old devices is created and attached to space_list
for later releasing.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Local update is performed based on created update, so this code can broke
local update and it is not necessary as prepare and process update functions
are used.
Code removed.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When update is created by mdadm, local information should be updated
also. This makes us to prepare one update for mdmon and second
"update" to maintain local changes. we can use prepared update for
"local/mdadm" metadata update purposes.
We have 2 cases:
1. when metadata is updated by mdmon, we avoid metadata reloading in
mdadm.
we proceed the same updtate 2 times:
- one time in mdadm for "local update"
- second time in mdmon for real metadat update
2. when metadata is updated by mdadm (no mdmon running) updates are
processed in the same way.
- one time in mdadm for "local update"
- there is no "second time" update but mdadm just flushes
metadata to array
This let us to avoid code duplication by using prepare and process
update functions as for update via mdmon. This makes update
preparing mdmon independent and there is no need to maintain the
same thing in 2 places in code.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Only one spare is passed in update.
When more than one disk is added first spare is passed multiple times.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Slot was set based on anchor information.
Disks information was copied outside disk list area.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Based on status information disks are added to array during grow (in reshape_array()).
This information currently is not present and all disks (old and new) were added to md.
To avoid adding already present disks, disk.state has to be set.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Child_monitor was design to perform 'manage_reshape' for native
arrays. So change the signature for ->manage_reshape to match
child_monitor and move the all to the same place that child_monitor
is called from.
Also give super-intel a manage_reshape handler which simple calls
child_monitor.
Signed-off-by: NeilBrown <neilb@suse.de>
As raid4 is not supported by imsm (this is takeovered raid0)
do not fix degraded raid4 arrays.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When raid0 reshape is performed metadata has to be applied by mdadm.
(without mdmon)
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
For code reuse in raid0 reshape case when monitor is not loaded.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When second array reshape is about to start metadata should be updated
by mdmon in imsm_set_array_state().
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When disks are added size has to increase in metadata.
This size should be used by common code to set size in md when reshape will be finished.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
For general migration function blocks_per_migr_unit() has to return valid value.
If there is no valid return, 0 is returned instead and causes division by 0 error.
Additionally guard in function was added for such case.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When reshape is finished monitor calls set_array_state() and finishes migration in metadata.
This change allows for finishing metadata migration on reshape end.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Add support for reading volume information during migration process.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
During first metadata update imsm for compatibility reason should update
only one array.
Buffers in prepare_update() are prepared for second update as well.
Signed-off-by: NeilBrown <neilb@suse.de>
Meta data was not updated due to the following problems:
1.disk index < 0 was treated as invalid, but this is spare device
2. disk index greater than currently used disks is correct also
3. newmap pointer has to be refreshed for second map copy operation
4. size calculation has to be guarded for shrinking operation
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When container operation is not allowed user has to get proper information on console about it
Currently this information was displayed as debug info only.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Correct information displayed by '-E' option.
1. FIX: Slot information during raid0 migration is displayed incorrectly
(missing disk position is taken from wrong map)
2. Improvement: information about (level, members, chunk size) migration is displayed.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Allow map related operations for the given map: first of second.
For reshape specific functionality it is required to have an access
Until now, the active map was chosen according to the current volume status.
Signed-off-by: Maciej Trela <maciej.trela@intel.com>
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
container_chose_spares in Monitor.c and
get_spares_for_grow in super-intel.c
do the same thing: search for spares in a container.
Another version will also be needed for Incremental
so a more general solution is presented here and
applied in two previous contexts.
Normally domlist==NULL would lead an empty list but
this is typically checked earlier so here it is interpreted
as "do not test domains".
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
uuid_match_any is replaced by uuid_zero for imsm spares.
Function fixup_container_spare_uuid not needed as it gives
unwanted uuid to spares.
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
We need to refuse to assemble an arrays with bad blocks.
Initially there was condition in container_content function
that returns error value in the case when metadata store information
about bad blocks.
When the container_content function is called from functions NOT connected
with assemble (Kill_subarray, Detail) we get faulty error return value.
Patch introduces new flag in array.status - MD_SB_BBM_ERRORS. It is set
in container_content when bad blocks are detected and can be checked by
container_content caller.
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
delta_disks field is not always filled during getinfo_super() call.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
If reshape is started resync is not allowed in parallel. This would
break reshape. If array is in General Migration state do not indicate
resync and allow for reshape continuation.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
We need to allow metadata to handle progress of reshape,
completion, and abort-before-start.
Include all those in ->set_array_state()
Signed-off-by: NeilBrown <neilb@suse.de>
Array state change is blocked due to reshape action in progress
metadata changes are during applying.
'1' is returned to indicate that array is clean
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
For this update prepare_update() allocates memory to relink imsm
(bigger) device imsm structures. It calculates new /bigger/ anchor
size.
Process update applies update in to imsm structures. This includes
- converting selected spares into configured devices
- marking the arrays as migrating
- making a new 'map' for each array with the changed details.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Sometimes one metadata update will require allocating several
larger data structures. As 'monitor' cannot allocate, 'manager'
must, so it must be able to attach a list of allocates to the
update, and importantly it must be able to easily free them.
So add a 'space_list' element to metadata updates where each
element on the list starts with a pointer to the next.
Signed-off-by: NeilBrown <neilb@suse.de>
During Online Capacity Expansion metadata has to be updated to show
array changes and allow for future assembly of array. To do this
mdadm prepares and sends reshape_update metadata update to mdmon.
The update contains the old and new number of raid disks, and the
indices of the spare disks that will be used to fill the spaces.
This works as follows:
1. reshape_super() prepares metadata update.
2. mdadm discovers the spares and adds them to the array
3. mdadm sends the update to mdmon
4. managemon in prepare_update() allocates required memory for bigger
device object
5. monitor in process_update() updates the metadata to record the
new sizes and the newly assigned devices.
6. mdadm initiates the reshape
Based on code From: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
For more than one disk tested additional_test_list was searched from last
point, not from begin.
This bug causes that more than 2 disks cannot be added to imsm array,
when imsm_add_spare() is used for this.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Before looking for a spare to rebuild a degraded array, check if there
are any failed disks in container. Block rebuild if another sub-array
is failed until failed disks are removed from container.
Currently, Intel metadata handler rebuilds all sub-arrays even if one
of them is non-redundant. In case of failed sub-array, failed disks
are just replaced with new ones in the metadata mapping. The data for
failed disk is not restored even the disk is present in the system.
With this fix, we require the removal of the failed disk from
container to start the process of rebuilding the array with failed
member. If the disk is physically pulled out of the system, the disk
is removed from container automatically by exiting udev rules.
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Manager thread shall pass the information to monitor thread (mdmon)
that some devices are removed from container. Otherwise, monitor
(mdmon) might use such devices (spares) to rebuild the array that has
gone degraded.
This problem happens for imsm containers, since a list of the
container disks is maintained in intel_super structure. When array
goes degraded, the list is searched to find a spare disks to start
rebuild. Without this fix the rebuild could be stared on the spare
device that was a member of the container, but has been removed from
it.
New super type function handler has been introduced to prepare
metadata format specific information about removed devices.
int (*remove_from_super)(struct supertype *st, mdu_disk_info_t *dinfo)
The message prepared in remove_from_super is later processed by
process_update handler in monitor thread.
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When calling mdadm -C --metadata=imsm -l 1 /dev/sd..
mdadm segfaults in default_chunk_imsm()
above syntax is incorrect, but mdadm should error instead of segfaulting
Signed-off-by: Luca Berra <bluca@comedia.it>
Signed-off-by: NeilBrown <neilb@suse.de>
Assumption for spares searching was that after picking new device, it
has to be added to array before next search. This causes returning
different disk on each call.
When creating a spare list during Online Capacity Expansion, we will
first collect the devices list and then all devices are added to md.
Picked device from spares pool has to be checked against picked
devices so far. If not, the same disk will be returned all the time.
Already picked devices are stored in the list and this list is used
for new devices verification also.
So add an extra arg to imsm_add_spare to hold a list of known
spares to ignore.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Wrong number of disks during metadata update causes core dump. New
disks number based on internal mdmon information has to used for
calculation (not previously read from metadata).
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Internal IMSM procedures need to support the General Migration.
It is used during operations like:
- Online Capacity Expansion,
- migration initialization,
- finishing migration,
- apply changes to raid disks etc.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Support metadata specific level, layout and chunksize defaults. Kill an
uneeded superswitch methods ahead of adding more for the reshape case.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Platform (metadata) domain let the metadata handlers differentiate
disk domains based on controllers that the disk belongs to.
Platform domain is sub-domain inside user specified domain
in mdadm.conf configuration files inheriting all parameters from it.
The metadata domain name is used disk domain matching functions.
The disk with the same metadata domain name belong to the same metadata
domain.
New metadata handler is added that retrieves platform domain string based
on disk path:
const char *(*get_disk_controller_domain)(const char *path);
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
If getinfo_super is called on a container supertype we only get information
on first disk. As a parameter it uses reference to preallocated
mdinfo structure. Amending getinfo_super to return full list of disks
would require ammending all previous calls and subsequently freeing memory
allocated for mdinfo list.
Function container_content that returns a mdinfo list is written
specifically for assembly, performing actions not needed to just fill
mdinfo. It also does not include spares so is unsuitable.
As an alternative a new function getinfo_super_disks is created
to obtain information about all disks states in array.
Existing function sysfs_free is used to free memory
allocated by getinfo_super_disks.
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>