add_internal_bitmap() returned 1 on success and 0 on error which is
inconsistent. This changes it to return 0 on success and use more
reasonable error codes on error.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
It doesn't make sense to create a clustered raid
with only 1 node.
Reported-by: Zhilong Liu <zlliu@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
The check of "is there a filesystem here" is still appropriate for a
journal device.
Also set active_disks correctly - even though it is ignored.
Signed-off-by: NeilBrown <neilb@suse.com>
Specify the write journal device with --write-journal DEVICE
./mdadm --create -f /dev/md0 --assume-clean -c 32 --raid-devices=4 --level=5 /dev/sd[c-f] --write-journal /dev/sdb1
mdadm: Defaulting to version 1.2 metadata
mdadm: array /dev/md0 started.
Only one journal device is allowed. If multiple --write-journal
are given, mdadm will use the first and ignore others
./mdadm --create -f /dev/md0 --assume-clean -c 32 --raid-devices=4 --level=5 /dev/sd[c-f] --write-journal /dev/sdb1 --write-journal /dev/sdx
mdadm: Please specify only one journal device for the array.
mdadm: Ignoring --write-journal /dev/sdx...
mdadm: Defaulting to version 1.2 metadata
mdadm: array /dev/md0 started.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Add BITMAP_MAJOR_CLUSTERED as 5, in order to prevent older kernels
to assemble a clustered device.
In order to maximize compatibility, the major version is set to
BITMAP_MAJOR_CLUSTERED *only* if the bitmap is clustered.
Also, added MD_FEATURE_CLUSTERED in order to return error
for older kernels which would assemble MD in case bitmap is
corrupted.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
The home-cluster is stored in the bitmap super block of the
array. The device can be assembled on a cluster with the
cluster name same as the one recorded in the bitmap.
If home-cluster is not specified, this is auto-detected using
dlopen corosync cmap library.
neilb: allow code to compile when corosync-devel is not installed.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Specifies the maximum number of nodes in the cluster that may use
this device simultaneously. This is equivalent to the number of
bitmaps created in the internal superblock (patches to follow).
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.de>
For a clustered MD, create bitmaps equal to number of nodes so
each node has an independent bitmap.
Only the first bitmap is has the bits set so that the first node
that assembles the device also performs the sync.
The bitmaps are aligned to 4k boundaries.
On-disk format:
0 4k 8k 12k
-------------------------------------------------------------------
| idle | md super | bm super [0] + bits |
| bm bits[0, contd] | bm super[1] + bits | bm bits[1, contd] |
| bm super[2] + bits | bm bits [2, contd] | bm super[3] + bits |
| bm bits [3, contd] | | |
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.de>
It is best to keep strings all together so that they
are easier to search for in the source code.
If a string is so long that it looks ugly one line,
them maybe it should be broken into multiple lines
for display too.
Only strings which contain a newline can be broken
into multiple lines:
"It is OK to\n"
"break this string\n"
Signed-off-by: NeilBrown <neilb@suse.de>
Infrastructure is there, so use it.
This requires making sure that ->data_offset is correctly set, even
for containers.
Signed-off-by: NeilBrown <neilb@suse.de>
For large arrays (component size > 100GB) if write-intent bitmap is not
enabled, then it is set by default to "internal", even if the metadata
format does support internal bitmaps, which causes Create to fail.
This patch adds checking if add_internal_bitmap is set in the
superswitch before setting bitmap_file to "internal".
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This modifies locking in Create to eliminate a situation where
--incremental can assemble a device between write_init_super() and
add_disk(), which causes Create to fail.
It sporadically occurs e.g. when metadata is written on a device,
causing an udev change event which triggers mdadm --incremental.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Some people want to create truely enormous arrays.
As we sometimes need to hold one file descriptor for each
device, this can hit the NOFILE limit.
So raise the limit if it ever looks like it might be a problem.
Signed-off-by: NeilBrown <neilb@suse.de>
If module parameter start_ro is set, arrays start readonly.
This is OK when assembling, but is very surprising when creating
an array as the resync won't start.
So over-ride the setting (unless --read-only was given) make
arrays RW when created.
Signed-off-by: NeilBrown <neilb@suse.de>
With the 'devnm' infrastructure fixed, it is quite easy to support
names like "md_home" for md arrays.
The currently defaults to "off" and can be enabled in mdadm.conf with
CREATE names=yes
This is incase other tools get confused by the new names.
Signed-off-by: NeilBrown <neilb@suse.de>
Here, "large" means components are 100G or more. It is
usually beneficial to have write-intent bitmaps on such arrays.
They can be suppressed with --bitmap=none
Signed-off-by: NeilBrown <neilb@suse.de>
We widely use a "devnum" which is 0 or +ve for md%d devices
and -ve for md_d%d devices.
But I want to be able to use md_%s device names.
So get rid of devnum (a number) and use devnm (a 32char string).
eg.
md0
md_d2
md_home
Signed-off-by: NeilBrown <neilb@suse.de>
"freesize" can be equal 0, particularly after rounding to the chunk's size.
Creating should be aborted in such case.
Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
mdadm --create /dev/md0 .... /dev/sda1:1024 /dev/sdb1:2048 ...
The size is in K unless a suffix: K M G is given.
The suffix 's' means sectors.
Signed-off-by: NeilBrown <neilb@suse.de>
This can be used to over-ride the automatic assignment of
data offset.
For --create, it is useful to re-create old arrays where different
defaults applied.
For --grow it may be able to force a reshape in the reverse direction.
Signed-off-by: NeilBrown <neilb@suse.de>
Both are impossible, and '1' allows size to be unsigned,
which is neater.
Also #define MAX_SIZE to be '1' to make it all more explicit.
Signed-off-by: NeilBrown <neilb@suse.de>
malloc should never fail, and if it does it is unlikely
that anything else useful can be done. Best approach is to
abort and let some super-daemon restart.
So define xmalloc, xcalloc, xrealloc, xstrdup which don't
fail but just print a message and exit. Then use those
removing all the tests for failure.
Also replace all "malloc;memset" sequences with 'xcalloc'.
Signed-off-by: NeilBrown <neilb@suse.de>
RAID1 arrays don't have a chunk size, but if you ever convert
one to RAID5 you will need at least a small one >= 4K.
So round of size to a multiple of 64K.
This only affect Create, not "--grow --size=max". The latter
is too hard and with smaller returns.
Signed-off-by: NeilBrown <neilb@suse.de>
In addition remove attempt to print an error message if
write_init_super() fails, as this is handled in the various
write_init_super() functions. This avoids a segfault on error.
Reported by Jim Meyering in
https://bugzilla.redhat.com/show_bug.cgi?id=795461
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When e.g. array name (an) is correct and it is the same as container name (cn),
file element creation /dev/md/an will replace /dev/md/cn.
This can cause that user cannot access container using /dev/md/cn.
Verify during array creation if chosen name is not already existing
one.
[Changed to use map_by_name() rather than stat() to determine prior
existence - NeilBrown]
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When validate_geometry finds that we haven't committed to
a metadata yet and that the subdev is a member of 'our'
container, it needs to report any errors it finds as Create()
cannot report them effectively.
So make a slight change to the semantics of the 'verbose' flag
and allow validate_geometry to report if it printed any error
messages.
Signed-off-by: NeilBrown <neilb@suse.de>
getinfo_super_imsm_volume doesn't correctly set info.disk fields
because it doesn't know which disk to set them from.
It should be the last disk passed to add_to_super.
So add a field 'current_disk' to record this disk in add_to_super, and
use it in getinfo_super.
This allows us to remove a hack in Create.c
Signed-off-by: NeilBrown <neilb@suse.de>
getinfo_super() can clear entire 'inf' structure before filling with new
information. Disk number required later is lost.
Restore disk number information after getinfo_super() call.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Some code currently clears 'info' before calling getinfo_super,
some code doesn't.
To be consistent, change it so no caller ever clears 'info',
but ever getinfo_super function must clear it.
Note that ->raid_disk may be meaningful if that 'map' is passed
non-NULL. In that case it is copied out before the structure
is zeroed.
Signed-off-by: NeilBrown <neilb@suse.de>
A recent change to improve error messages make it not possible to
create an array from devices that are 'busy'. However if they are
made busy by a container, then the create should be allowed.
So move one of the error messages later.
Reported-by: "Wojcik, Krzysztof" <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
RAID0 has accepted chunksizes that are not a power of 2 since 2.6.30.
So it time mdadm allowed that to be used.
Signed-off-by: NeilBrown <neilb@suse.de>
When -e option is given then the first validate_geometry
sets default chunk. Size must be rounded there and do_default_chunk
needs to be set to 0 so that we don't repeat the message below.
If we start without st then what we find on the the first disk determines
the st and sets chunk. So after running
validate_geometry on the first disk we need to fix the size too.
At this point chunk should always be set but it is safer to keep the check.
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>