mdadm should not wait indefinitely when it trys to reset
superblock on device which is busy (cannot be opened).
Acked-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
The current locking uses lockf, and is completely broken.
When you hold a lockf lock, any close of any fd on that file will
release the lock. So map_read() call which is made as soon as we get
the lock, will immediately drop the lock.
So change to flock locking which isn't so badly designed.
Signed-off-by: NeilBrown <neilb@suse.de>
We already have a call to 'enough' in Detail which is the check for
"do we have enough devices". We just need to calculate the required
data a bit earlier, then use the same 'enough' call to possibly
print FAILED.
This is motivated by Debian bug 495755.
The other request in that bug is not practical.
It would be very nice if output of `mdadm' is more clear in case of a
broken array.
Currently the only hint you get from `mdadm' that your array is broken
is this:
# mdadm -A /dev/md0 /dev/sdc1 /dev/sdd1 /dev/sde1 /dev/sdf1
mdadm: /dev/md0 assembled from 1 drive and 3 spares - not enough to start the
array.
It could say something like `Your array is broken, you can't use it anymore'
It is not valid to report that array as 'broken' if the user hasn't
listed all the devices, which could be the case here.
Resolves-Debian-Bug: 495755
Signed-off-by: NeilBrown <neilb@suse.de>
If a bitmap exists on an array, then current kernels cannot grow
that array.
So when we try to grow an array, test for EBUSY and if a bitmap is
present, report that the bitmap needs to be removed.
Resolves-Debian-Bug: 534571
Signed-off-by: NeilBrown <neilb@suse.de>
Once load_super has succeeded, it should continue to succeed. However
devices can disappear etc so it is prudent to always check the return
status of load_super.
Signed-off-by: NeilBrown <neilb@suse.de>
These were never supposed to be released, and due
to a type issue they cause compile problems on
some architectures.
Resolves-Debian-Bug: 567167
Signed-off-by: NeilBrown <neilb@suse.de>
This allows a person to testing using loopback devices that don't
support serial number queries.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
>>
>> When I assemble an array I tend to have checked the devices before
>> hand; it would not be difficult to make the final pass a zeroing pass
>> if I knew I could vastly speed up post-assembly performance. As I
>> stated, it's merely a lack of clarity in the documentation.
>
> If you would like to create a patch against the man page, I would be happy to
> accept it.
>
> NeilBrown
Signed-off-by: NeilBrown <neilb@suse.de>
Unlike native md checkpointing some data about the geometry and type of
the migration process is coded into curr_migr_unit. Provide logic to
convert between md/{resync_start|recovery_start} and imsm/curr_migr_unit.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Minimal changes needed to permit reassembling partially recovered
external metadata arrays. The biggest logical change is that
->container_content() can now surface partially rebuilt members rather
than omitting them from the disk list.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Replace occurrences of ~0ULL to make it clear we are talking about maximal
resync/recovery position.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
We don't need to sprinkle reads of this attribute all over the place,
just once at the entry of read_and_act(). Also, the mdinfo structure
for the array already has a 'resync_start' member, so just reuse that.
Finally, rename get_resync_start() to read_resync_start to make it
consistent with the other sysfs accessors in monitor.c.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When printing the migration state there is no need to print "migrating".
The fact that the state is non-idle should be enough indication.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
disk_list_get() can return NULL if:
1/ A formerly missing disk is re-added
2/ The original array has not been rebuilt, so the family number of the
missing disk still matches
3/ The metadata record of the in-sync disks are read before the missing
disk
This will result in the missing disk not adding its own serial number to
the disk_list, only its truncated value will be present.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When associating a spare take on the target's metadata version number to
satisfy future compare_super checks.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Factor out the orom checking bits to validate_geometry_imsm_orom() and
share it between validate_geometry_imsm_volume() and the entry path to
reserve_space().
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The patch increases the capacity of buffers used to store
sysfs path names. Originally the buffers were too small to
hold the canonical representation of sysfs path (in case
of a SAS device, especially a device installed behind an
expander).
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Reviewed-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Make sure opened file descriptors are cleaned up
in the exit path when error occured.
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Array index of 'path' may be out of bounds. Array
'path' of size 256 may use index value(s) 0..284.
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Array index of 'device' may be out of bounds. Array 'device'
of size 40 may use index value(s) 0..43.
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Possible memory leak. Dynamic memory stored in 'dev' and 'dev' allocated
through function 'malloc' can be lost on exit path.
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Possible memory leak. Dynamic memory stored in 'sra' allocated through
function 'sysfs_read' at line 2484 can be lost at lines 2491, 2560 and
2571.
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dynamic memory stored in 'devnum2devname(st->container_dev)' allocated
through function 'devnum2devname' at line 1274 is lost at line 1278.
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pointer 'c' returned from call to function 'strchr' at line 954 may
be NULL and will be dereferenced at line 955.
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pointer 'disk' returned from call to function '_get_imsm_disk' at line
700 may be NULL and will be dereferenced at line 710.
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pointer 'st' returned from call to function 'malloc' at line 320 may
be NULL and it will be dereferenced at line 321.
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
sysfs_add_disk() regenerates the name from major:minor, so we can drop a
strcpy that the static analysis checker does not like.
Reported-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Buffer overflow, array index of 'nm' may be out of bounds.
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pointers '_dev' and '_disk' returned from call to function '_get_imsm_dev'
and '_get_imsm_disk' may be NULL and will be dereferenced at lines
2933 and 2934, respectively.
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Suspicious dereference of pointer 'super' before NULL check at
line 3429.
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Make sure opened file descriptor is cleaned up on exit
path. Also make sure allocated memory for 'sra' is released
on exit path, too.
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pointer 'this' returned from call to function 'malloc' at line 3795
may be NULL and will be dereferenced at line 3796.
Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Potential buffer overflow of 'link' caused by user input may occur,
due to non null-terminated string 'link'.
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
If a device is marked as faulty, then a re-add will cause it to be
added as a faulty drive, which is not what it wanted.
So just refuse to try to re-add a device which is marked 'faulty'.
Signed-off-by: NeilBrown <neilb@suse.de>
When creating an array, check if the devices have partition
tables and print a warning if the table or the partitions might be
destroyed by array creation.
Signed-off-by: NeilBrown <neilb@suse.de>