Let handlers specifiy their own defaults, specifically needed for the
imsm-raid5 case where mdadm defaults to 'ls' and imsm to 'la'.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dump the orom capabilities and hardware disk configuration. This code
relies on the name of scsi_host objects to determine the hardware port
number. Hopefully this information is stable...
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Metadata formats like imsm work in concert with platform firmware and
hardware, so provide a way for mdadm to display this info to the user.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
These checks are only enabled when platform support for imsm is found,
i.e. ahci driver is loaded and talking to an Intel(R) controller, and
the option rom header is located.
They can be turned off by setting the environment variable
IMSM_NO_PLATFORM to 1.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
imsm metadata requires all members of a raid volume to start at the same
offset. So, incrementally build a composite disk from all the
candidates passed to ->validate_geometry. After each disk is added
merge the extents and search for a common start offset that satisfies
the requested raid device size.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When chunksize is 0 in the raid1 case we need to use
info_to_blocks_per_member() to calculate the array size.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
If, when creating an array, a signal target device is given which
is a container, then allow the metadata handler to choose which
devices to use.
This is currently only supported for DDF.
Signed-off-by: NeilBrown <neilb@suse.de>
1/ When truncating the space reserved for the metadata round down to an
even numbered sector count to avoid an off-by-one error when
sysfs_add_disk rounds up.
2/ Set the current metadata parameter block size
as a floor.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Make sure every failure from add_to_super prints a suitable
error message, and then don't print any error in the caller.
Signed-off-by: NeilBrown <neilb@suse.de>
Change the multibyte disk status field definitions to imsm byte-order
(little-endian) to match other multibyte field definitions.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Change the "env_check_mdmon" function to be more generic, accepting
and environment variable name, as soon we will have a new use for it.
Signed-off-by: NeilBrown <neilb@suse.de>
If a spare is included in the list of examined disks we need to copy in at
least enough information to get the uuid of the populated container.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This prevents a uuid of all f's from being displayed when an imsm spare is
listed along with active disks for mdadm -Eb.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Examine() is actually looking at the ACTIVE bit. This happened to work for
imsm spares but now it needs to be fixed up.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Raid disk and disk number information is not relevant at the container
level, especially for imsm. So arrange for getinfo_super_imsm() to
always publish devices as spares and report the number of spares at
Assemble() time.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The uuid returned for an imsm spare device will never match the uuid of an
active disk. So make mdadm interpret a uuid of all f's as "match any".
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Both super-ddf and super-intel ignore memory allocation failures during
->activate_spare. Fix these up by cancelling the activation.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
load_imsm_disk() currently notices if spares missed their activation
update, but we allow a stale failed disk back in to the array because its
serial number is clobbered in the most up-to-date disk.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
If a drive is removed while mdmon is not running we need a way to
identify what is missing and mark that disk as failed in the metadata.
At ->load_super() time create a list of missing disks defined as a disk
that is marked in-sync yet does not appear in super->disks.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Spotted a thinko... raid devices are dynamically sized, disks are not.
The space for disks is always mpb->num_disks * sizeof(struct imsm_disk).
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When the array is shutdown, or when mdadm --wait-clean is called, any
active resync process will be idled allowing mdmon to record the current
resync position.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
md/resync_start reports different terminal values depending on kernel
configuration (~0UL versus ~0ULL). Make detection of the
resync-complete state more robust by comparing against array size.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
On ich6r the option-rom appears to reserve only 432 sectors rather than
the 418+4096 of newer implementations. For compatibility trust the
metadata in these cases.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
1/ near-2 indeed matches how the Windows driver lays out the data
2/ update imsm_check_degraded to check for rebuilding disks in the
raid10 case
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
zero-initialize the serial buffer to handle cases where the response is
less than MAX_RAID_SERIAL_LEN.
Tested-by: Jacek Danecki <jacek.danecki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>