For RAID5, not being able to set new_data_offset because of
old kernel is not a problem. So make this fatal on for RAID10.
Also remove an unused assignment to 'rv'.
Signed-off-by: NeilBrown <neilb@suse.de>
We widely use a "devnum" which is 0 or +ve for md%d devices
and -ve for md_d%d devices.
But I want to be able to use md_%s device names.
So get rid of devnum (a number) and use devnm (a 32char string).
eg.
md0
md_d2
md_home
Signed-off-by: NeilBrown <neilb@suse.de>
As 'layout' doesn't map neatly from RAID4 to RAID5, we need to
set it correctly for RAID4.
Also, when no reshape is needed we should set re->level to the final
desired level.
Signed-off-by: NeilBrown <neilb@suse.de>
commit 1f9b0e2845
Grow - be careful about 'delayed' reshapes.
Introduced a bug where a list of devices longer than 1
would cause an infinite loop. Oops.
Signed-off-by: NeilBrown <neilb@suse.de>
It fixes the following uninitialized variables compilation-time error:
WARN - Grow.c: In function ‘reshape_array’:
WARN - Grow.c:2413:21: error: ‘min_space_after’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
WARN - Grow.c:2376:39: note: ‘min_space_after’ was declared here
WARN - Grow.c:2414:22: error: ‘min_space_before’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
WARN - Grow.c:2376:21: note: ‘min_space_before’ was declared here
WARN - cc1: all warnings being treated as errors
WARN - make: *** [Grow.o] Error 1
It occurs during compilation of mdadm on Fedora 17.
Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Commit 5da9ab9874
Grow_reshape re-factor
in mdadm-3.2 broke conversion from RAID5 and RAID1 - and we
never noticed.
This fixes it.
Signed-off-by: NeilBrown <neilb@suse.de>
As it was the code would crash due to "mdstat" being NULL.
Code is now more sane, but hasn't been tested on an array that
needs to grow.
Signed-off-by: NeilBrown <neilb@suse.de>
When reducing the number of devices in a RAID10, we increase the
data offset to avoid the need for backup area.
If there is no room at the end of the device to allow this, we need
to first reduce the component size of each device. However if there
is room, we don't want to insist on that, otherwise growing then
shrinking the array would not be idempotent.
So find the min before/after space before analysing a RAID10 for
reshape, and if the after space is insufficient, reduce the total size
of the array and the component size accordingly.
Signed-off-by: NeilBrown <neilb@suse.de>
RAID10 reshape requires that data_offset be changed.
So we only allow it if the new_data_offset attribute is available,
and we compute a suitable change in data offset.
Signed-off-by: NeilBrown <neilb@suse.de>
This can be used to over-ride the automatic assignment of
data offset.
For --create, it is useful to re-create old arrays where different
defaults applied.
For --grow it may be able to force a reshape in the reverse direction.
Signed-off-by: NeilBrown <neilb@suse.de>
If multiple reshapes are activated on the same devices (different
partitions) then one might be forced to wait for the other to
complete.
As reshaping suspends access to small sections of the array
at time, this cause a region to be suspended for a long time,
which isn't good.
To try to detect this and don't start suspending until
the reshape is actually happening.
This is only effective on 3.7 and later as prior kernels
don't report when the delayed reshape can progress. For
the earlier kernels, just give a warning.
Signed-off-by; NeilBrown <neilb@suse.de>
The 'size' has been changed to be unsigned recently.
Analogous changes should be made to reshape_super().
'0' should be used in case of 'no change' now.
Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
commit d04f65f48c
Change the values for "max size" from -1 to 1.
Messed up 's->size' - leaving it as '1' (MAX_SIZE) in some cases and
causing the array reshape to fail.
Signed-off-by: NeilBrown <neilb@suse.de>
Both are impossible, and '1' allows size to be unsigned,
which is neater.
Also #define MAX_SIZE to be '1' to make it all more explicit.
Signed-off-by: NeilBrown <neilb@suse.de>
If we change some functions to accept 'verbose', where <0 means to be
quiet, in place of 'quiet', then we will be able to merge
'quiet' and 'verbose' together for simplicity.
Signed-off-by: NeilBrown <neilb@suse.de>
malloc should never fail, and if it does it is unlikely
that anything else useful can be done. Best approach is to
abort and let some super-daemon restart.
So define xmalloc, xcalloc, xrealloc, xstrdup which don't
fail but just print a message and exit. Then use those
removing all the tests for failure.
Also replace all "malloc;memset" sequences with 'xcalloc'.
Signed-off-by: NeilBrown <neilb@suse.de>
This is most likely to happen if the array has been stopped,
in which case the error is pointless.
Reported-by: Patrik Horník <patrik@dsl.sk>
Signed-off-by: NeilBrown <neilb@suse.de>
I think there was some confusion about what --layout=preserve
actually means, but in any case it wasn't doing what the man
page says it should.
So add some case analysis and make sure it does the right thing,
or complains if it cannot.
Reported-by: Patrik Horník <patrik@dsl.sk>
Signed-off-by: NeilBrown <neilb@suse.de>
mdinfo->bitmap_offset is a signed long and needs to be treated as
such when passed to the kernel.
This resolves the problem with adding internal bitmaps to a 1.0 array.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Setting "sync_action" to "idle" while extending size of raid0 array
is racy and sometimes fails.
"sync_action" should be set to "frozen" instead.
Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Size change is possible as standalone change only. To make sure size change
is not requested pass '-1' as size parameter.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Some setting size error cases were not detected.
When error occurs, stop setting new size action and rollback metadata
changes.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When reshape_super() updates metadata with new size, due to some metadata
limitations saved value can be different than requested value by user.
Update size (read it from metadata) for setting it in md.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
For raid0, takeover operation is required for size change.
Add takeover to degraded raid4 before size change and back to raid0 after.
Array information has to be read again from md after takeover.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Function reshape_super() guards metadata changes.
It is used to apply changes rollback in error case also.
As change (apply and rollback) can be not bi-directional reshape_super()
has to know if current action is metadata change that should be guarded
using metadata restrictions, or this is metadata rollback change
executed due to error occurrence.
In second case change has to be unconditional.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
For external metatdata ioctl doesn't set new size. Set new size using sysfs.
Put code for size change in to function to re-use the same code as during
On-line Capacity Expansion
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
RAID1 can only be converted to RAID0 or RAID5 if the size is
a multiple of 4K as we cannot have chunks smaller than 4K.
If this might happen, report a useful error message.
Signed-off-by: NeilBrown <neilb@suse.de>
If a RAID6 array is in a state which doesn't have a
RAID5 equivalent, the code currently dereferences a NULL.
If it does have an equivalent - use that.
If it doesn't but it already in the RAID5-compatible layout
with the Q block last, handle that case,
else require the new layout to be explicitly requested.
Signed-off-by: NeilBrown <neilb@suse.de>
Reading sysfs entry that is '0' long should cause an error.
Reshape position cannot be empty.
Absence of reshape position should be ignored. It is possible
that we are about raid0 reshape continuation and it is before takeover.
This means that according metadata (changed by mdmon) it should be reshaped
but md knows nothing about it at this moment. Reshape continuation
in reshape_array() will change it to raid4 and reshape position appears
in sysfs.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When one of arrays is inactive, do not try to continue reshape
on this array. Just skip it.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When reshape is restarted from '0', very begin of array
it is possible that for external metadata reshape and array
configuration doesn't happen.
Check if md has the same opinion, and reshape is restarted
from 0. If so, this is regular reshape start after reshape
switch in metadata to next array only.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>