Array size is rounded to the nearest MB, however number of data stripes
and blocks per disk are calculated using size passed by the user. If
given size is not aligned, there is a mismatch. It's not possible to
assemble raid0 migrated to raid5 since raid5 arrays use number of data
stripes to calculate array size.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
This can be used with --assemble for super1 and with --update-subarray
for imsm to enable or disable PPL in the metadata.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
Enable creating and assembling IMSM raid5 arrays with PPL. Update the
IMSM metadata format to include new fields used for PPL.
Add structures for PPL metadata. They are used also by super1 and shared
with the kernel, so put them in md_p.h.
Write the initial empty PPL header when creating an array. When
assembling an array with PPL, validate the PPL header and in case it is
not correct allow to overwrite it if --force was provided.
Write the PPL location and size for a device to the new rdev sysfs
attributes 'ppl_sector' and 'ppl_size'. Enable PPL in the kernel by
writing to 'consistency_policy' before the array is activated.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
Show the currently enabled consistency policy in the output from
--detail. Add 3 spaces to all existing items in Detail output to align
with "Consistency Policy : ".
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
Add a new parameter to mdadm: --consistency-policy=. It determines how
the array maintains consistency in case of unexpected shutdown. This
maps to the md sysfs attribute 'consistency_policy'. It can be used to
create a raid5 array using PPL. Add the necessary plumbing to pass this
option to metadata handlers. The write journal and bitmap
functionalities are treated as different policies, which are implicitly
selected when using --write-journal or --bitmap options.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
Gcc reports it needs 19 bytes to right to disk->serial. Because the
type of argument i is int. But the meaning of i is failed disk
number. So it doesn't need to use 19 bytes. Just add a type
conversion to avoid this building error
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
In gcc7 there are some building errors like:
directive output may be truncated writing up to 31 bytes into a region of size 24
snprintf(str, MPB_SIG_LEN, %s, mpb->sig);
It just need to copy one string to target. So use strncpy to replace it.
For this line code: snprintf(str, MPB_SIG_LEN, %s, mpb->sig);
Because mpb->sig has the content of version after magic, so
it's better to use strncpy to replace snprintf too.
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
If user tries to migrate from raid0 to raid5 and there is no spare
drive to perform it - mdadm will exit with errorcode, but
no error message is printed.
Print error instead of debug message when this condition occurs,
so user is informed why requested migration is not started.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
Number of blocks used to calculate array size is based on 512 block size
so the size displayed is incorrect for arrays with 4k disks.
Signed-off-by: Maksymilian Kunt <maksymilian.kunt@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
OROM defines maximum number of arrays supported. On array creation mdadm
checks if number of arrays doesn't exceed that limit, however it is not
calculated correctly for VMD now.
The current code performs a lookup of HBA using the id. VMD HBAs have
the same id so each lookup returns the same structure (first
encountered). Take a different approach for VMD HBAs. As id is not
unique and cannot be used for lookups, iterate over all VMD HBAs and
compare both id and HBA path.
Signed-off-by: Alexey Obitotskiy <aleksey.obitotskiy@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
Prior to this patch there was an error during compiling
on 32-bit arch. This patch fixes this issue.
Reported-by: Thomas Backlund <tmb@mageia.org>
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Enable bad block support for imsm metadata as commit e522751d605d
("seq_file: reset iterator to first record for zero offset") has been
accepted in upstream kernel. Prior to that patch mdmon had not been able
to read bad blocks sysfs file.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This patch prevents mdadm from updating metadata if migration is
not possible. The same check is done in analyse_change(),
but in that place - metadata is already modified.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
IMSM doesn't set 'events' field with generation number, so sometimes mdadm
tries to re-assembly container using metadata which isn't most recent (e. g.
from spare disk).
Signed-off-by: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This patch adds checking if platform (preOS) supports
non-Intel NVMe drives under VMD domain,
and - if so - allow creating IMSM Raid Volume
with those drives.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Implement "--examine-badblocks" command to provide list of bad blocks in
metadata for a disk.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Provide list of bad blocks using memory allocated in advance so it's
safe to call it from monitor.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
If a disk fails or goes missing, clear the bad blocks associated with it
from metadata. If necessary, update disk ordinals.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Check for a duplicate first or try to merge it with existing bad block.
If block range exceeds BBM_LOG_MAX_LBA_ENTRY_VAL (256) blocks, it must
be split into multiple ranges. Fail if maximum number of bad blocks has
been already reached.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
On create set bad block support flag for each drive. On assmble also
provide a list of known bad blocks. Bad blocks are stored in metadata
per disk so they have to be checked against volume boundaries
beforehand.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Pre-allocate memory for largest possible bad block section when monitor
is being opened to avoid a need for memory allocation on metadata sync.
If memory for a structure has been allocated in mpb buffer but it hasn't
been used yet, it will be taken by next buffer grow, leading to
insufficient memory on metadata flush. Start tracking such memory and
take it into calculation when growing a buffer. Also assert has been
added to debug mode to warn when more metadata has been written than
memory allocated.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Always allocate memory for all log entries to avoid a need for memory
allocation when monitor requests to record a bad block.
Also some extra checks added to make static code analyzer happy.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This patch adds updataing num_data_stripes during reshape.
Previously this field once set during creation was never updated.
Also, num_data_strips value multipied by chunk_size is used
for set proper component size for RAID5.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Maksymilian Kunt <maksymilian.kunt@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Bad block support has incremented sysfs disk state reported by kernel
("external_bbl") so it became longer than 20 bytes. It causes reshape to
fail as it reads truncated entry from sysfs.
Increase buffer so it can accommodate the string including all state
values currently implemented in kernel at the same time.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Convert general migration record for 4Kn drives prior to write and post
read. Calculate record location based on sector size, don't just assume
it's 512. Assure buffer address is aligned to 4096 so write operation
avoids caching.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This patch adds support for drives with 4Kn sector size
for IMSM metadata. Mixing member drives with 4kn and 512
is not allowed. Some offsets were aligned with sector size.
Internal metadata representation and all calculations
are still based on 512-byte sector sizes. This
implementation converts only sector based values
when reading/writing to drive, because they needs to be
stored in metadata according to accual member drive sector size.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This patch adds retriving device sector size at startup
and set it in intel_super, so it can be used in other places.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This patch adds the warning message when x8-type device
is used with IMSM metadata. x8 device is a special
NVMe drive - two of them on a single PCIe card.
This card could be a single point of failure for
RAID levels different than RAID0. x8 devices have
serial number ending with "-A/-B" or "-1/-2".
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Migration record is only stored on disks in first and second metadata
slot. The function to load the record incorrectly passes disk slot as
disk index. If rebuilt has taken place for a container, disk slot
doesn't match disk index so it causes migration record to be read from a
disk it has not been written to. As a result reshape operation fails.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Chunk size change of RAID 10 array fails because it is not supported but
invalid values still are being written to metadata and array cannot be
assembled after stop. Operation should be blocked before metadata update.
Signed-off-by: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
The clang compiler complained about each of these.
The mdmon.h error will only affect 'far' RAID10 arrays using intel or DDF
metadata, and there is no such thing.
The mdopen.c will cause a problem if there are no free md device
numbers in the first 512. That is fairly unlikely.
The restripe.c error would only affect the 'test_stripe' command, and
probably doesn't change its behaviour.
The super-intel.c fix is purely cosmetic.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Don't rely on SCSI ioctl for reading NVMe serials - SCSI emulation for
NVMe devices can be disabled in the kernel config. Instead, try to get a
serial from /sys/block/nvme*/device/serial. If that fails for whatever
reason (i.e. no such attribute in old kernels) - fall back to the SCSI
method.
This also moves some SCSI-specific code from imsm_read_serial() to
scsi_get_serial().
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Reviewed-by: Alexey Obitotskiy <aleksey.obitotskiy@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Fix the cases that produced messages like "mdadm: : The message".
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This fixes some issues when a member array is created with "missing"
devices in a container that has more devices than used in the member
array.
Reported-by: Yi Zhang <yizhan@redhat.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
The sync_completed can be set to such values:
- two numbers of processed sectors and total during synchronization,
separated with '/';
- 'none' if synchronization process is stopped;
- 'delayed' if synchronization process is delayed.
Handle value of sync_completed not only as numbers but
also check for 'none' and 'delayed'.
Signed-off-by: Alexey Obitotskiy <aleksey.obitotskiy@intel.com>
Reviewed-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
After resync is stopped sync_action value become 'idle'.
We treat this case as normal termination of waiting, not as error.
Signed-off-by: Alexey Obitotskiy <aleksey.obitotskiy@intel.com>
Reviewed-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
The sync_completed after restarting a reshape
(for example - after reboot) is set to "delayed" until
mdmon changes the state. Mdadm does not wait for that change with
old kernels. If this condition occurs - it exits and reshape
is not continuing. This patch adds retry of reading sync_complete
with a delay. It gives time for mdmon to change the "delayed" state.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
These are similar to stat2devnm() and fd2devnm() but not limited to md
devices. If the device is a partition they will return its kernel name,
not the whole device's name. For more information see commit:
8d83493 ("Introduce devid2kname - slightly different to devid2devnm.")
Also remove unsued declaration for fmt_devname().
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
If sra == NULL we cannot goto abort, as it would result in calls to
sysfs_set_num() which would dereference sra.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This patch simplifies for() loop used in
ahci_enumerate_ports(). It makes it more readable.
Similar thing was done in b913501
({platform,super}-intel: Fix two resource leaks).
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This patch reverts a0abe1e
(super-intel: Make print_found_intel_controllers() return void)
and make this function "return int" again.
Also, interpreting the return value is added.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
The return value from print_found_intel_controllers() is never used,
so lets make it return void.
Reported-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
The code did not free 'dir' allocated by opendir(). An additional
benefit is that this simplifies the for() loops.
Fixes: 60f0f54d ("IMSM: Add support for VMD")
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
This adds a buffer size argument to load_sys(), rather than relying on
a hard coded buffer size. The old behavior was safe because we knew
the kernel would never return strings overrunning the buffers, however
it was ugly, and would cause code checking tools to spit out warnings.
This caused a Coverity warning over the read into
sra->sysfs_array_state which is only 20 bytes.
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
A recent commit removed a call to abort_reshape() when IMSM reshape
completed. An unanticipated result of this is that the suspended
region is not cleared as it should be.
So after a reshape, a region of the array will cause all IO to block.
Re-instate the required updates to suspend_{lo,hi} coped from
abort_reshape().
This is caught (sometimes) by the test suite.
Also fix a couple of typos found while exploring the code.
Reported-by: Ken Moffat <zarniwhoop@ntlworld.com>
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Fixes: 2139b03c20 ("imsm: don't call abort_reshape() in imsm_manage_reshape()")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>