While last_checkpoint is counter in per disk units, checkpoints
should be stored in the same manner.
Restoring from checkpoint should should recalculate checkpoint in to
array position (reshape_progress).
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
last_checkpoint is variable that tracks sync_complete sysfs entry.
sync_complete is per disk counter, so initializing during starting from checkpoint
has to have this in mind and convert reshape position properly.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When reshape is restarted and active array in mdmon is being initialized,
mdmon has to know last checkpoint, otherwise reshape will be restarted
form '0' position.
mdadm when reshaped array is assembled stores reshape_position in sysfs
and runs mdmon. Initialize last_checkpoint in active array structure
to value present in sysfs for reshaped array start.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Unfreeze array on success only.
rv is initialized by restart variable so we have 2 cases.
1. regular reshape start
rv == restart == 0
this means that real error (returned by reshape) can cause leaving container frozen
If array is not touched by reshape it can be unfrozen
2. During reshape restart even untouched array under reshape is left unfrozen,
If reshape is started do not unfreeze array on error also.
This allows user for array repair action
(mdmon will not change array state).
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
If an --add is requested and a re-add looks promising but fails or
cannot possibly succeed, then don't try the add. This avoids
inadvertently turning devices into spares when an array is failed but
the devices seem to actually work.
Signed-off-by: NeilBrown <neilb@suse.de>
We were setting ->container_member twice in ddf get_info.
Once to currentconf->vcnum,
once to atoi(st->subarray).
Both should be the same.
For consistency with super-intel, use the first.
Signed-off-by: NeilBrown <neilb@suse.de>
If adding a bitmap fails with EBUSY, then it is because the array is
currently resyncing/recovering/reshaping.
As this is non-obvious, give a message explaining the fact.
Signed-off-by: NeilBrown <neilb@suse.de>
We shouldn't call remove_partitions until we have made a really firm
decision to include the device into the array.
Signed-off-by: NeilBrown <neilb@suse.de>
As chunk_size in mdstat_ent is never set, we shouldn't copy
it into a->info.array.
In fact, it is safest to get rid of the field altogether.
Reported-by: "Kwolek, Adam" <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Check on upper limit of number of devices was in the wrong place.
Result was could not create array with more than 27 devices without
explicitly setting metadata, even though default metadata allows more.
Fixed, and also perform check when growing an array.
Signed-off-by: NeilBrown <neilb@suse.de>
I'm seen mdadm spinning while failing to read 'degraded'.
This doesn't really fix it, but is a reminder that it needs to be
fixed.
Signed-off-by: NeilBrown <neilb@suse.de>
If we can't read actual disk state, it shoud be initiated
to 0.
Overwise it may be out of date value resulting false action
later in code (e.g. set disk to improper state).
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Due to a miscalculation we didn't initialise the whole file.
There is 4K (8 sectors) for the metadata, then the data.
Signed-off-by: NeilBrown <neilb@suse.de>
Before resizing an array with --size or --array-size, then filesystem
should be resized. mdadm cannot do this so the user should.
Reported-by: Gavin Flower <gavinflower@yahoo.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When opening an array to manipulate it we never need to write to the
array and sometimes it might be read-only so the open for write will
fail.
So always open read-only.
Reported-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When an array using native metadata is increasing in size, we don't
need to keep monitoring it after the initial 'critical section'.
So detect that case.
If a final level-change is still needed mdadm will wait for that,
otherwise it will simply exit.
Signed-off-by: NeilBrown <neilb@suse.de>
We now test ->reshape_active, but don't set it in a common case.
So just zero out the whole structure to be on the safe side.
Signed-off-by: NeilBrown <neilb@suse.de>
This is done via conversion to RAID4 and back.
To grow the array, extra devices will be needed which cannot
already be present as spares - so allow a list of new devices
to be included in grow request which changed the number of devices.
Signed-off-by: NeilBrown <neilb@suse.de>
When an RAID0 is started using SET_ARRAY_INFO ioctl the
component_size will be zero.
This confused the code for reshaping a RAID0 via RAID4.
So if that seems to be the case, fake a believable component_size
Signed-off-by: NeilBrown <neilb@suse.de>
mdadm has a convention in some areas of passing a device name
if error messages about it are interesting, or NULL if not.
Follow this convention with find_intel_hba_capability so that it
doesn't complain when not appropriate - and so that it doesn't
have to go and find a device name that it wasn't given.
Signed-off-by: NeilBrown <neilb@suse.de>
OROM/EFI capabilities are retrieved based on disk's controller type.
1/ alloc_super no longer retrieves OROM capabilities
2/ find_imsm_capability replaces find_imsm_orom
3/ new function find_intel_hba_capability gets disk's HBA and relevant
capability
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Function find_intel_hba_capability attaches HBA information
to intel_super structure based on fd of the component disk.
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
compare_super_imsm verifies that the component disks use the same type of HBA
in platform dependent environment. Otherwise print-out error message and block
the action.
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Arrays exceeding the OROM/EFI maximum number of supported disk are
blocked in validate_geometry_imsm_orom function.
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Print-out error message when volume geometry fails to comply with
OROM/EFI controller's capabilities.
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Container_content_imsm calls validate_goemtry_imsm_orom to verify that
the array parameters are supported by controller's OROM/EFI.
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
The function uses find_intel_device and find_imsm_capability to present
AHCI and SAS controller capabilities taken from OROM or EFI.
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
If operating system is installed using efi, IMSM platform capabilities are
not available via option ROM, but are stored as efi variables. New
mechanism has been introduced to obtain capabilities by variables.
Signed-off-by: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@intel.com>
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
It will be used for reading efi variables with capabilities.
Signed-off-by: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
The structure is update according to current specification. These values
are not used right now, but they are not "reserved" anymore.
Signed-off-by: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@intel.com>
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Adds data offset to PCI expansion ROM Data Structure in resource
describing Expansion ROMs. This allows AHCI OROM scanning function
to identify AHCI OROM by device id 0x2822 and vendor id 0x8086.
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
During reshape for dirty volumes reshape_progress has to be calculated
also. To keep the same logic for array creation:
not setting info->resync_start = MaxSector when first condition is
true,
resync_start is initialized by MaxSector to allow proper array
initialization.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
For not reshaped array in container during assembly array is in
auto-read-only state. It is not possible to set disk slot for such
array and later reshape cannot be started also. To move array from
'auto-read-only' to 'active' state storing 'active' state to sysfs is
added. This allows for disks configuration and reshape.
During reshaped array restart it is disabled by condition on restart
variable.
When reshape is starting, storing 'active' state to already active
array should not matter.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When opening an array to manipulate it we never need to write to the
array and sometimes it might be read-only so the open for write will
fail.
So always open read-only.
Reported-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
when starting an array that is in the middle of a migration,
we need to start mdmon, just as we do for arrays which are not
in the middle of a migration.
Repored-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>