If any reshape in container is active set recovery_blocked field.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
During reshape, resync/rebuild in the same container is not possible
due to fact that all arrays in container has to share the same disks set.
Block new resync/rebuild process initialization and setting resync_start
to 0 while any reshape in container is active. This avoids breaking
container reshape and doesn't allow for starting multiple processes
/resync/rebuild and reshape/ at the same time in md.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Spare disk activation or starting repair for one array while on second
reshape is in progress, will lead to IMSM incompatible situation when
2 arrays in container shares different disks sets.
This can cause that 2 processes in container /reshape and rebuild/
are in progress in parallel. This is IMSM incompatible situation also.
Block spare disk activation and starting resync if any reshape in container
is in progress.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
New function to calculate minimum reservation to expect from a spare
is introduced.
The required amount of space at the end of the disk depends on what we
plan to do with the spare and what array we want to use it in.
For creating new subarray in an empty container the full reservation of
MPB_SECTOR_COUNT + IMSM_RESERVED_SECTORS is required.
For recovery or OLCE on a volume using new metadata format at least
MPB_SECTOR_CNT + NUM_BLOCKS_DIRTY_STRIPE_REGION is required.
The additional space for migration optimization included in
IMSM_RESERVED_SECTORS is not necessary and is not reserved by some oroms.
MPB_SECTOR_CNT alone is not sufficient as it does not include the
reservation at the end of subarray.
However if the real reservation on active disks is smaller than this
(when the array uses old metadata format) we should use the real value.
This will allow OLCE and recovery to start on the spare even if the volume
doesn't have the reservation we normally use for new volumes.
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When validate_geometry finds that we haven't committed to
a metadata yet and that the subdev is a member of 'our'
container, it needs to report any errors it finds as Create()
cannot report them effectively.
So make a slight change to the semantics of the 'verbose' flag
and allow validate_geometry to report if it printed any error
messages.
Signed-off-by: NeilBrown <neilb@suse.de>
Allows to create RAID 5 volume on 3 disks and then RAID 1 volume on 2
disks withing the same container.
Signed-off-by: Lukasz Orlowski <lukasz.orlowski@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Takeover marks disk as failed and adds to serial ':0' string and then
turns it in to spare. This causes that when new spare is about to be used,
it cannot be found due to different disk serial number.
Restore disk serial number to avoid this problem.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Specifying missing devices at create is very useful for array recovery.
For imsm create dummy disk entries at init_super_imsm time, and then use
them to fill in unoccupied slots in the final array (if the container is
unpopulated).
If the container is already populated (has a subarray)
'missing' disks must be in reference to already recorded missing devices
in the metadata.
Also add support for --assume-clean for imsm arrays.
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Different OROMs reserve different amounts of space for the migration area.
When activating a spare minimize the reserved space otherwise a valid spare
can be prevented from joining an array with a migration area smaller than
IMSM_RESERVED_SECTORS.
This may result in an array that cannot be reshaped, but that is less
surprising than not being able to rebuild a degraded array.
imsm_reserved_sectors() already reports the minimal value which adds to
the confusion when trying rebuild an array because mdadm -E indicates
that the device has enough space.
Cc: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Commit 94827db3 "imsm: add spares to --examine output." may try to
display failed disks whose imsm_disk info is not uptodate (due to not
being able to look itself up by serial). The same effect can be had by
just loosening the restriction in print_imsm_disk().
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
We already refrain from updating metadata on disks that are failed at
load, need to do the same for new failures. This also reverts b4add146
as we *do* want to update other disks' view of the failed device as out of
date.
Cc: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Validate geometry is incorrectly looking at max disks support which is
irrelevant for md/mdadm. ->dpa (disks per array) is how many disks the
orom will allow per volume.
Also cleanup an unnecessary ->orom check, is_raid_level_supported()
already does the right thing in the !orom case.
Cc: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Some bits are not handled by mdadm, but their presence should not
cause failure.
In particular MPB_ATTRIB_NEVER_USE appears harmless.
Reported-by: Thomas Steinborn <thestonewell@googlemail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
The 'raid_disk' can be different to the 'number' and must be
the position of the device in the array, not in the container.
Normally these should not be different, but the test-suite creates a
possibility so it should work.
Signed-off-by: NeilBrown <neilb@suse.de>
Set a valid default in the !orom case, otherwise we segfault, or
otherwise fail.
Cc: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
getinfo_super_imsm_volume doesn't correctly set info.disk fields
because it doesn't know which disk to set them from.
It should be the last disk passed to add_to_super.
So add a field 'current_disk' to record this disk in add_to_super, and
use it in getinfo_super.
This allows us to remove a hack in Create.c
Signed-off-by: NeilBrown <neilb@suse.de>
This patch fixes these build issues:
super-intel.c: In function 'getinfo_super_imsm_volume':
super-intel.c:2327:4: error: format '%llu' expects argument of type 'long long
unsigned int', but argument 3 has type '__u64' [-Werror=format]
super-intel.c: In function 'imsm_reshape_super':
super-intel.c:8665:7: error: 'devnum' may be used uninitialized in this function [-Werror=uninitialized]
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
The serial number is not necessarily nul terminated, so we need to be
sure to only use the allowed number of chars.
Signed-off-by: NeilBrown <neilb@suse.de>
Reported-by: Arvin Schnell <aschnell@novell.com>
IMSM's meta data contains Attributes field that contains information about
supported features.
To assembly an array mdadm has to support all features specified by attributes.
The patch introduces new attributes support and validation of the attribuses
during an array assembly.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When array size is not aligned to copy area, number of migration unit
is increased in init_migr_record_imsm():7665 to reshape whole array.
During calculation of last migration unit, this should be in mind also,
otherwise checkpoint (max-1) is always written and reshape
is never finished in mdadm.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Pointer dev2 passed in write_super_imsm():4451 can be equal to NULL.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When target_offsets allocation fails execution goes to abort label,
where elements from targets table are closed.
Initialize targets table after allocation.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When array raid0 is migrated to raid5, reshape cannot be continued
correctly due to wrong array parameters settings.
Raid disks number is set too big.
There is no need, during raid0->raid5 migration to increase
info->array.raid_disks, it is already set to final value using
designation map information.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Sporadicaly when Raid5's data are restored from backup area,
corruption occurs.
It doesn't happen if reshape process is beyond critical section.
Root cause of the problem is passing wrong starting point in
restore_stripes(). It was hard coded to 0 so far.
This causes that parity disks position in first stripe was always set
to the last raid disk. This position should depend on data position in array.
Proper start position was set and pointer for restoring data
(copy area address) is adjusted to passed start parameter.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
mdmon cannot rollback metadata changes automatically.
It can break reshape process in the way that in case of reshape break
user will not be able to deal with broken reshape due to lack of information
about reshape geometry.
mdadm (process that invokes reshape) doesn't make any rollback to allow
for user action. mdmon should not do this either unless it knows for sure
it is save. such knowledge is not available for automatic rollback.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Function imsm_level_to_layout() should be use to get array layout.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When no reshape backup is required (e.g. OLCE after critical section),
check-pointing can use bigger steps than backup space allows for.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Timeout should not be used for select function in wait_for_reshape_imsm().
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This function needs to be corrected.
It should check sysfs operations status and it should not interpret
0 reshape position special meaning.
Unused input parameter is removed also.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When backup exists in copy area reshape cannot be continued.
In such situation, array is in unstable state.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Unused variables and code can be removed from imsm_manage_reshape()
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When array under reshape is assembled, reshape position used in sysfs_set_array()
should be set to position after recovered from backup area.
This avoids data corruption due to reshape the same array area again.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Detect in recover_backup_imsm() if not opened disks number is smaller
than allowed degradation for given raid level. This allows for reshape restart
on degraded array.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
For raid0 reshape imsm uses degraded raid4 for this operation.
Using real raid level (raid0) for stripe calculation causes no need
for parity calculation and can speed up reshape process.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
new_data parameter is not used in save_backup_imsm().
It is removed from function interface.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
imsm_manage_reshape() should not shift start copy position.
This offset is passed to manage reshape function /and it is used/
as input parameter in offsets table already.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Parameters that are not used by imsm_manage_reshape() should not cause
failure of this function.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When user doesn't specify raid 5 layout for raid0->rai5 migration,
layout structure member is uninitialized. Earlier it cannot be determined
if it is correct or not.
In metadata handle proper verification is placed.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When rounded array size information from metadata is used for number
of migration units calculation it can occurs that result of units
can be smaller (-1) than required due to used (rounded) array size).
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Checkpoint should be saved when migration is in progress only.
End of reshape (based on passes status) should be detected and it should
not cause abort of reshape/check-pointing/ operation.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Migration compatibility can be checked when general migration record
is present.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
container_content_imsm was setting info->next before calling
getinfo_super_imsm_container which now zeros everything.
So move that assignment to afterwards.
So both imsm and ddf were assuming info->disk.raid_disk means
something but it doesn't. So fix those.
Signed-off-by: NeilBrown <neilb@suse.de>
imsm's arrays supports imsm native check-pointing now.
User warning is no longer required.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
mdmon has to update checkpoint information in metadata during
general migration according to received metadata update.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Adam Kwolek
Czarnowska, Anna
NeilBrown
Lukasz Orlowski
Dan Williams
Milan Broz
Luca Berra
Albert Pauw