Neil Brown
37dfc3d638
When resync finished, report the mismatch count if there is one.
...
This doesn't get mailed out, but will appear in syslog...
Maybe it should be mailed if it was a 'check' or 'repair' pass...
2006-12-14 17:31:25 +11:00
Neil Brown
b90c0e9a12
--wait or -W will wait for resync activity to finish on the given devices.
2006-12-14 17:31:22 +11:00
Neil Brown
758d3a8e7d
Increase raid456 stripe cache size if needed to --grow the array.
...
The setting used unfortunately requires intimate knowledge of the
kernel, and it not reset when the reshape finishes.
2006-12-14 17:31:16 +11:00
Neil Brown
583315d9c5
Give useful message if raid4/5/6 cannot be started because it is not clean and is also degraded.
2006-12-14 17:31:13 +11:00
Neil Brown
199171a297
Improve allocation and use of space for bitmaps in version1 metadata
...
Depending on the size of the array we reserve space for up to 128K
of bitmap, and we use it where possible.
When hot-adding to a version 1.0 we can still only use the 3K at the
end though - need a sysfs interface to improve that.
If a small chunksize is requested on Create, we don't auto-enlarge
the reserved space - this still needs to be fixed.
2006-12-14 17:31:00 +11:00
Neil Brown
b5e3d1901f
Remove some unused interfaces to the metadata handlers.
...
This stuff has never been used (at least as far as git history can
see). I wonder why it was there...
2006-12-14 17:30:53 +11:00
Neil Brown
0430ed4868
Remove partitions from components of an md array
...
They do nothing but cause confusion.
2006-10-13 09:02:35 +10:00
Neil Brown
38098016ca
Allow symlink creation to be disabled from command line or mdadm.conf
2006-08-11 18:00:05 +10:00
Neil Brown
8aec876d2e
More consistent honoring of --configfile
...
Never use /etc/mdadm.conf if --config file is given (previously
some code used one, some used the other).
2006-06-26 15:11:01 +10:00
Neil Brown
45e878bba6
Improve ftw handling.
...
If not 'ftw' is available, still allow openning of devices by dev number.
More recent version of uclibc support nftw, so add support to check
for that.
2006-06-26 15:10:48 +10:00
Neil Brown
0ae03b8ad8
Yet another include file that someone doesn't like....
...
It seems byteswap.h isn't universally accepted, so
we do it by hand...
Signed-off-by: Neil Brown <neilb@suse.de>
2006-06-02 05:37:47 +00:00
Neil Brown
058574b1da
Allow default metadata to be specified in mdadm.conf
...
CREATE metadata=1
in mdadm.conf will cause version-1 superblocks to be the default.
Signed-off-by: Neil Brown <neilb@suse.de>
2006-06-02 05:33:40 +00:00
Neil Brown
efd441d17b
Finally (I hope) get byteorder stuff portable.
...
/usr/include/endian.h and /usr/include/byteswap.h together
can give us almost what we need...
Signed-off-by: Neil Brown <neilb@suse.de>
2006-06-02 01:49:00 +00:00
Neil Brown
9fca7d6236
check return status of all write/fwrite functions as required by glibc 2.4
...
From: Luca Berra <bluca@vodka.it>
glibc 2.4 is pedantic on ignoring return values from fprintf, fwrite and
write, so now we check the rval and actually do something with it.
in the Grow.c case i only print a warning, since i don't think we can do
anything in case we fail invalidating those superblocks (is should never
happen, but then...)
Signed-off-by: Neil Brown <neilb@suse.de>
2006-05-29 02:06:32 +00:00
Neil Brown
280a927d3d
Uclibc has deprecated 'random' so use 'rand' instead.
...
glibc says of rand
Do not use this function in applications intended to be
portable when good randomness is needed.
Go figure...
Signed-off-by: Neil Brown <neilb@suse.de>
2006-05-29 02:06:32 +00:00
Neil Brown
b56c363090
add CFLAGS to mdassemble build and fix a couple of non-returning functions
...
pass CFLAGS to mdassemble build, enabling -Wall -Werror showed some
issues also fixed by the patch.
From: Luca Berra <bluca@vodka.it>
Signed-off-by: Neil Brown <neilb@suse.de>
2006-05-29 02:06:32 +00:00
Neil Brown
589395d696
Support --auto-update-homehost
...
This can be used to bootstrape homehost tagging.
If no arrays are found that are tagged, we look for any array
and tag it.
Signed-off-by: Neil Brown <neilb@suse.de>
2006-05-26 04:16:07 +00:00
Neil Brown
83b6208e89
When assembly arrays using incomplete detail, prefer arrays built for this host.
...
i.e. if assembling with --name or --super-minor, then if we find two
different arrays with the same apparent identity, and one was built
for 'this' host, then prefer that one instead of giving up in disgust.
Signed-off-by: Neil Brown <neilb@suse.de>
2006-05-23 06:33:28 +00:00
Neil Brown
811e6cbed7
Reorganise Assemble code somewhat.
...
We make sure all devices can are consistent before doing any --update
This saves us from updating some but not all of an array, and then
aborting.
It also means we can backtrack on out decisions, which we might want to
do later.
Signed-off-by: Neil Brown <neilb@suse.de>
2006-05-23 06:12:40 +00:00
Neil Brown
e5eac01f3d
Make sure homehost is set correctly when --update=uuid
...
Signed-off-by: Neil Brown <neilb@suse.de>
2006-05-23 04:51:39 +00:00
Neil Brown
a1cbd7d053
Include homehost information in --examine as appropriate
...
Signed-off-by: Neil Brown <neilb@suse.de>
2006-05-19 07:19:04 +00:00
Neil Brown
b6750aa8da
Include homehost information in --detail where appropriate.
...
Signed-off-by: Neil Brown <neilb@suse.de>
2006-05-19 07:13:03 +00:00
Neil Brown
05697ec1e2
Make homehost information appear in superblock.
...
When an array is created, if the homehost is know,
the superblock gets it, either in the uuid, (via sha1)
or in the name field.
Signed-off-by: Neil Brown <neilb@suse.de>
2006-05-19 06:56:06 +00:00
Neil Brown
997aed5dee
Allow homehost to be set on command line or in config file
...
Signed-off-by: Neil Brown <neilb@suse.de>
2006-05-19 05:50:08 +00:00
Neil Brown
4f589ad0c5
Just updaqte copyright dates and email address
...
Signed-off-by: Neil Brown <neilb@suse.de>
2006-05-19 05:25:11 +00:00
Neil Brown
f1ae21c411
Arrange the 'auto' setting in mdadm.conf can choose default type.
...
So when you say auto=md or auto=part in mdadm.conf, it give a preference
for type of array, but standard name will override.
But --auto=md is more insistant.
FIXME I'm not at all happy about handling of names that already exist.
I don't think that should be removed if the device is active.
Signed-off-by: Neil Brown <neilb@suse.de>
2006-05-16 07:35:06 +00:00
Neil Brown
8131b493df
When updating uuid, update the bitmap as well - external bitmaps
...
Signed-off-by: Neil Brown <neilb@suse.de>
2006-05-16 06:05:27 +00:00
Neil Brown
5bbb48424b
Allow default creation info to to be stored in mdadm.conf
...
Default owner, group, mode and 'auto' flag can be given in a 'CREATE' line.
Signed-off-by: Neil Brown <neilb@suse.de>
2006-05-15 06:02:41 +00:00
Neil Brown
4948b8f72e
Support 'mailfrom' line in mdadm.conf so the From: line in alert emails can be explicitly set.
...
Signed-off-by: Neil Brown <neilb@suse.de>
2006-05-15 01:27:04 +00:00
Neil Brown
4ccdb95600
Use O_DIRECT to read bitmap files.
...
A pending patch to the kernel causes bitmap file updates
to not go through the page cache, so O_DIRECT is needed to
ensure that we read current data.
Signed-off-by: Neil Brown <neilb@suse.de>
2006-05-15 00:56:02 +00:00
Neil Brown
7ef02d0143
Support 'bitmap=' in mdadm.conf for auto-assembling arrays with write-intent bitmaps in separate files.
...
Signed-off-by: Neil Brown <neilb@suse.de>
2006-03-29 02:57:48 +00:00
Neil Brown
6409687b55
Kill old superblocks on create.
...
Make sure old-version superblocks are not around to confuse anything
when a new array is created.
Signed-off-by: Neil Brown <neilb@suse.de>
2006-03-28 23:22:58 +00:00
Neil Brown
16c6fa807c
Create missing /dev files where needed.
...
Whenever we need a device file to open, if one cannot be found in /dev,
create a temporary one.
Signed-off-by: Neil Brown <neilb@suse.de>
2006-03-28 06:26:53 +00:00
Neil Brown
06b0d78675
Allow resize to backup to a file.
...
To support resizing an array without a spare, mdadm now understands
--backup-file=
which should point to a file for storing a backup of critical data.
This can be given to --grow which will create the file, or
--assemble which will restore from the file if needed.
Signed-off-by: Neil Brown <neilb@suse.de>
2006-03-27 06:38:46 +00:00
Neil Brown
313176636e
Remove ident arg from getinfo_super;
...
Add a 'name' field to 'info' to compensate.
Signed-off-by: Neil Brown <neilb@suse.de>
2006-03-27 04:34:38 +00:00
Neil Brown
353632d927
Support restarting of a reshape on --assemble
...
Signed-off-by: Neil Brown <neilb@suse.de>
2006-03-20 03:17:31 +00:00
Neil Brown
e86c9dd6d8
Initial reshape support
...
Needs work for other levels etc.
Signed-off-by: Neil Brown <neilb@suse.de>
2006-03-13 05:51:32 +00:00
Neil Brown
1e0d770c0f
Release some compile fixes.
...
Signed-off-by: Neil Brown <neilb@suse.de>
2006-02-06 04:18:12 +00:00
Neil Brown
22a8899586
Sort mdstat entries so that composites are well-ordered.
...
This means that "-Ds" lists arrays in an approprate order
for assembly.
Signed-off-by: Neil Brown <neilb@suse.de>
2006-01-31 00:39:50 +00:00
Neil Brown
8fac0577f0
Stuff like..
...
- report Intent Bitmap in --detail
- report internal bitmap in --examine
- pass' --force through to --grow --bitmap
- support v.large arrays in --grow --bitmap
Signed-off-by: Neil Brown <neilb@suse.de>
2006-01-30 23:23:45 +00:00
Neil Brown
5dd497eecb
Enable support for v.large raid1.
...
clean up 'long long' usage for size of array, so that
with v-1 superblocks a raid1 larger than 2TB is possible.
Signed-off-by: Neil Brown <neilb@suse.de>
2006-01-27 06:21:06 +00:00
Neil Brown
838acbc272
Assorted fixes...
...
Signed-off-by: Neil Brown <neilb@suse.de>
2006-01-27 01:44:47 +00:00
Neil Brown
773135f5bd
syslog support for monitor mode
...
From: ross@jose.lug.udel.edu (Ross Vandegrift)
Hi Neil,
While adding the text message mode, I saw a FIXME asking for syslog
support in monitor mode.
This patch adds exactly that.
Signed-off-by: Neil Brown <neilb@suse.de>
2005-12-05 05:55:56 +00:00
Neil Brown
47d79ef8e5
Support --assume-clean for --create
...
Signed-off-by: Neil Brown <neilb@suse.de>
2005-12-05 05:54:48 +00:00
Neil Brown
c06487ce20
Improve option parsing
...
stuff
====Do Not Remove====
Status: ok
Signed-off-by: Neil Brown <neilb@suse.de>
2005-12-05 05:54:33 +00:00
Neil Brown
8b0dabea07
Allow scanning of devices listed in /proc/partitions independant of /dev
...
If a device found in /proc/partitions isn't listed in /dev, then
mknod a temporary name and open that.
Signed-off-by: Neil Brown <neilb@suse.de>
2005-12-05 05:52:50 +00:00
Neil Brown
f9c25f1d2a
Support bitmaps with raid10
...
And a couple of other little things
Signed-off-by: Neil Brown <neilb@suse.de>
2005-11-22 03:37:14 +00:00
Neil Brown
dcec9ee547
Create version-4 bitmaps if kernel supports it.
...
Version-3 bitmaps are host-endian. Version-4 are little-endian
and so more portable.
Signed-off-by: Neil Brown <neilb@suse.de>
2005-10-11 04:44:44 +00:00
Neil Brown
f6d75de8e0
Fix remaining problems with hot-add bitmap to version-1 superblock
...
Also some more tests - r5 and r6 bitmaps
Signed-off-by: Neil Brown <neilb@suse.de>
2005-09-12 05:24:10 +00:00
Neil Brown
265e0f1731
Fix assembling of raid10 in the face of missing devices.
...
We now check if enough devices are present properly, so
--force can be used to good effect.
Signed-off-by: Neil Brown <neilb@suse.de>
2005-09-12 04:57:52 +00:00
Neil Brown
1bf4e2d962
Passes all tests, nearly ready for release.
...
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-08-26 06:08:28 +00:00
Neil Brown
34163fc7cf
Support internal bitmaps with format-1 superblocks.
...
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-08-25 04:31:44 +00:00
Neil Brown
fe80f49b6e
Assorted fixes
...
Support "--build"ing arrays with bitmaps.
hot-removal of bitmaps
--re-add of drives recently removed.
assorted extra tests
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-08-16 06:45:23 +00:00
Neil Brown
dab6685f3d
Add 'quite' option and tidy up some tests.
...
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-08-15 06:14:27 +00:00
Neil Brown
947fd4ddb5
Support nameing of version-1 arrays.
...
--name is recognised in --create and --assemble
name= is recognised in config file.
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-08-09 05:23:20 +00:00
Neil Brown
dfd4d8ee42
Add write-behind support
...
Currently this includes
--write-behind to set level of write-behind supported
--write-mostly to flag devices as write-mostly.
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-08-09 04:25:47 +00:00
Neil Brown
f277ce3671
Assorted Fixes for multiple bugs.
...
Assemble would crash, or just not work.
A few other problem found by a new test-suite.
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-08-04 04:41:12 +00:00
Neil Brown
11018a4592
Redhat 6.2 seems to require sys/time.h as well as time.h
...
Thanks to "Pieter D.J. Krul" <p at krul.cc>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-07-29 00:20:37 +00:00
Neil Brown
fbf8a0b7a6
Document this...
...
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-07-18 01:30:42 +00:00
Neil Brown
fe6729fa8c
Fix compilation with tinyc
...
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-06-14 06:43:00 +00:00
Neil Brown
173fc51539
Add device files created with --auto to list of known device files.
...
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-06-14 06:37:57 +00:00
Neil Brown
3fa06e9d37
Make type of uuid always int[], rather than sometimes __u32[]
...
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-06-14 06:32:34 +00:00
Neil Brown
91f068bf5c
Retry --stop --scan until all stoppable devices have been stopped
...
This is needed to reliably stop stacked arrays
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-06-14 06:32:18 +00:00
Neil Brown
96395475fc
Make --zero-superblock work for version 1 superblocks.
...
This requires passing the supertype to store_super
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-06-07 23:03:45 +00:00
Neil Brown
ea32955930
Increase max-devs on type-1 superblocks
...
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-06-07 23:03:46 +00:00
Neil Brown
f5e166fee3
Support --grow --bitmap=internal
...
Adding a filebased bitmap is not yet supported, and
this code is still under development.
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-06-07 23:03:46 +00:00
Neil Brown
55935d5180
Add support for internal bitmaps
...
For version 0.90 superblocks, an internal bitmap can be specified at create.
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-06-07 23:03:47 +00:00
Neil Brown
c82f047cfc
Initial bitmap support
...
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-06-07 23:16:35 +00:00
Neil Brown
82d9eba687
super1
...
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Fix raid5 creation with new code.
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-05-03 23:44:40 +00:00
Neil Brown
f9ce90ba50
Add a 'super-switch' so that different format superblocks can be used.
...
This includes:
adding --metadata= option to choose metadata format
adding metadata= word to config file.
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-05-03 23:44:32 +00:00
Neil Brown
4b1ac34b51
Separate sueprblock handling into separate file
...
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-05-03 23:44:18 +00:00
Neil Brown
8d80900b49
When assembling with --auto, honour common device names
...
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
2005-04-04 05:16:10 +00:00
Neil Brown
b5e6464503
mdadm-1.8.0
2004-11-01 04:49:34 +00:00
Neil Brown
e5329c3747
mdadm-1.7.0
2004-08-11 02:16:01 +00:00
Neil Brown
dd0781e505
mdadm-1.6.0
2004-06-04 12:03:19 +00:00
Neil Brown
98c6faba80
mdadm-1.5.0
2004-01-22 02:10:29 +00:00
Neil Brown
feb716e9c3
mdadm-1.4.0
2003-10-28 23:20:01 +00:00
Neil Brown
aa88f531b4
mdadm-1.3.0
2003-07-28 23:59:00 +00:00
Neil Brown
56eedc1a3f
mdadm-1.2.0
2003-03-12 22:24:39 +00:00
Neil Brown
d013a55e94
mdadm-1.1.0
2003-03-02 23:11:38 +00:00
Neil Brown
5787fa4906
mdadm-1.0.9
2003-02-12 00:17:26 +00:00
Neil Brown
bd526cee92
mdadm-1.0.1
2002-05-20 11:17:18 +00:00
Neil Brown
c913b90e6d
mdadm-0.8.1
2002-04-05 22:00:28 +00:00
Neil Brown
e0d1903663
mdadm-0.8
2002-04-04 01:58:32 +00:00
Neil Brown
56eb10c0b6
mdadm-0.7.1
2002-03-15 05:21:36 +00:00
Neil Brown
9a9dab3670
mdadm-0.7
2002-03-08 00:03:52 +00:00