Initially there is no proper translation mdstat's DELAYED/PENDING processes
to "--detail" output.
For example, if we have recover=DELAYED in mdstat, "--detail"
shows "State: recovering" and "Rebuild Status = 0%".
It was incorrect in case of process waiting on checkpoint different
than 0%. In fact rebuild status is differnt than 0% and user is misled.
The patch fix the problem. Current "--detail" command shows
in the exampe: "State: recovering (DELAYED)" and no information
about precentage.
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Since info->delta_disks is signed it doesn't need to be special-cased.
This allowed my 9->8 reshape to display correctly instead of as 8->7
Signed-off-by: NeilBrown <neilb@suse.de>
Fix random typos and add a few of missing words/macros.
Also update RAID website URL as it is not accessible anymore.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
It is supposed to be under Grow mode. Since Create/Build/Grow modes
use common options and '-a' is already used for '--auto' in Create/
Build modes, describe it to avoid confusion.
Signed-off-by: NeilBrown <neilb@suse.de>
The next version of Linux might be 3.0. If it is, get_linux_version
will fail.
So make it more robust.
Reported-by: Namhyung Kim <namhyung@gmail.com>
Reported-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
The 'best' array only has 'bestcnt' entries allocated, so 'i' should
always be "< bestcnt", not "<= bestcnt".
Reported-by: "Lawrence, Joe" <Joe.Lawrence@stratus.com>
Signed-off-by: NeilBrown <neilb@suse.de>
looking at the gpt code in util.c i found i did not like it at all, a
gpt partition entry is currently 128 bytes, but the spec does not say it
is a fixed value, so the code that reads into a buffer with 512bytes
chunk expecting this to be a multiplier of part_size is imho incorrect.
my fix was to read each partition entry directly into a struct
GPT_part_entry, the advantage is that the code is very simple to read,
the disadvantage it is 128 reads of 128 bytes each, which is
sub-optimal, but i believe readahead will mitigate this a lot.
Signed-off-by: NeilBrown <neilb@suse.de>
Now that getinfo_super clears the info structure, we need
to make sure the correct values are filled in to info->dev.
Signed-off-by: NeilBrown <neilb@suse.de>
Now that we reserve space for migration buffer devices are a little
bit smaller so we need to allow for that in the test suite.
Also add a 'udevadm settle' - it seems to help
Signed-off-by: NeilBrown <neilb@suse.de>
If the second device is much newer than the first, but has a lower
raid_disk number, we clear 'avail' badly and don't set up
'best' properly.
Fix these things.
Signed-off-by: NeilBrown <neilb@suse.de>
IMSM's meta data contains Attributes field that contains information about
supported features.
To assembly an array mdadm has to support all features specified by attributes.
The patch introduces new attributes support and validation of the attribuses
during an array assembly.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When array size is not aligned to copy area, number of migration unit
is increased in init_migr_record_imsm():7665 to reshape whole array.
During calculation of last migration unit, this should be in mind also,
otherwise checkpoint (max-1) is always written and reshape
is never finished in mdadm.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Pointer dev2 passed in write_super_imsm():4451 can be equal to NULL.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When target_offsets allocation fails execution goes to abort label,
where elements from targets table are closed.
Initialize targets table after allocation.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When array raid0 is migrated to raid5, reshape cannot be continued
correctly due to wrong array parameters settings.
Raid disks number is set too big.
There is no need, during raid0->raid5 migration to increase
info->array.raid_disks, it is already set to final value using
designation map information.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Sporadicaly when Raid5's data are restored from backup area,
corruption occurs.
It doesn't happen if reshape process is beyond critical section.
Root cause of the problem is passing wrong starting point in
restore_stripes(). It was hard coded to 0 so far.
This causes that parity disks position in first stripe was always set
to the last raid disk. This position should depend on data position in array.
Proper start position was set and pointer for restoring data
(copy area address) is adjusted to passed start parameter.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
mdmon cannot rollback metadata changes automatically.
It can break reshape process in the way that in case of reshape break
user will not be able to deal with broken reshape due to lack of information
about reshape geometry.
mdadm (process that invokes reshape) doesn't make any rollback to allow
for user action. mdmon should not do this either unless it knows for sure
it is save. such knowledge is not available for automatic rollback.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Function imsm_level_to_layout() should be use to get array layout.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
getinfo_super() can clear entire 'inf' structure before filling with new
information. Disk number required later is lost.
Restore disk number information after getinfo_super() call.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When no reshape backup is required (e.g. OLCE after critical section),
check-pointing can use bigger steps than backup space allows for.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Timeout should not be used for select function in wait_for_reshape_imsm().
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
This function needs to be corrected.
It should check sysfs operations status and it should not interpret
0 reshape position special meaning.
Unused input parameter is removed also.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When backup exists in copy area reshape cannot be continued.
In such situation, array is in unstable state.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When no output file is given save_stripes() should collect amount of stripes
in passed buffer. Currently all stripes are saved in the same area in passed
buffer. This causes that last stripe is returned on buffer begin only.
Increase buffer (buf) pointer when save_stripes() is about switch to next
stripe operation. This allows for proper buffer filling as input parameter
length directs.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Unused variables and code can be removed from imsm_manage_reshape()
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When array under reshape is assembled, reshape position used in sysfs_set_array()
should be set to position after recovered from backup area.
This avoids data corruption due to reshape the same array area again.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Detect in recover_backup_imsm() if not opened disks number is smaller
than allowed degradation for given raid level. This allows for reshape restart
on degraded array.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
For raid0 reshape imsm uses degraded raid4 for this operation.
Using real raid level (raid0) for stripe calculation causes no need
for parity calculation and can speed up reshape process.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
new_data parameter is not used in save_backup_imsm().
It is removed from function interface.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
imsm_manage_reshape() should not shift start copy position.
This offset is passed to manage reshape function /and it is used/
as input parameter in offsets table already.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Parameters that are not used by imsm_manage_reshape() should not cause
failure of this function.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When user doesn't specify raid 5 layout for raid0->rai5 migration,
layout structure member is uninitialized. Earlier it cannot be determined
if it is correct or not.
In metadata handle proper verification is placed.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When rounded array size information from metadata is used for number
of migration units calculation it can occurs that result of units
can be smaller (-1) than required due to used (rounded) array size).
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Checkpoint should be saved when migration is in progress only.
End of reshape (based on passes status) should be detected and it should
not cause abort of reshape/check-pointing/ operation.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>