If initial resync or recovery of a redundant array is not finished
before it is stopped then during assembly md will start it as inactive.
Writing readonly to array_state in assemble_container_content
fails because md thinks the array is during reshape.
In fact we only have a reshape if both current and previous map
states are the same. Otherwise we may have resync or recovery.
Setting reshape_active in such cases causes the issue.
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com>
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
In metadata size is set already during migration initialization.
There is no reason for second /the same/ calculation.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Before reshape finalization migration is still present in metadata.
After patch 'imsm: FIX: crash during getting map'
function get_imsm_map() returns correct value,
this means in our case from second (start) map.
We should calculate map size basing on first (final) map.
For this we should request it by setting second function parameter to '0'
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Array size calculation is made in the same way in few places in code.
Make function imsm_set_device_size() for this common code.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Some debug strings remains as they were introduced,
before code was moved to separate function.
Information displayed by debug information in not all cases
was correct.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
imsm_num_data_members() can indicate error by returning 0 value
In such case size cannot be set based on 0 value.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When a->last_checkpoint variable can reach array end,
reshape finalization can be put in to single place.
There is no need to reset migration variables.
imsm_set_disk() will call end_migration() and this sets
all migration variables to required values.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When get_imsm_map() is called with second_map parameter == '-1'
and array is not in migration state NULL pointer is returned.
This is wrong. '-1' means return map as migration record points.
'-1' can be passed to get_imsm_map() from imsm_num_data_members().
imsm_num_data_members() is called to get current map members based
on migr_state information
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Too big map was copied (outside allocated memory) and this causes
mdmon crash for 2 raid0 arrays in container.
Map of correct (smaller) size should be copied,
to not overwrite any internal data.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When expansion is run on 2 raid0 arrays in container no update
is sent to mdmon because mdmon is off (mdadm performs update)
Memory size for first reshaped array is allocated to satisfy memory
requirements for expanded maps.
Memory for second device is allocated using old disks number, as in
metadata there is no information about this array reshape.
When mdmon initiates second array reshape it overwrites internal
structures and crashes). There is no place to keep expanded maps.
To avoid this situation during loading metadata, allocated memory
should be performed using the maximum used disks number in particular
container.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When second array reshape is about to start external metadata should
be updated by mdmon in imsm_set_array_state(). For this purposes
imsm_progress_container_reshape() is reused.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Reshape is started from second array, so it causes imsm incompatibility
and problems during second array start.
Reshape should be started in arrays metadata order.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Adding spare disks to imsm container fails due to problem with writing
new_dev to sysfs. This problem was caused by not closed handle
(opened exclusively) in Manage.c:803.
Disk handle was not closed by free_imsm().
This is due to not released disk_mgmt_list in free_imsm_disks().
Proper release of imsm metadata allows for spare adding without problems.
Memory leak was fixed also.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
imsm_reshape_super() currently allows for expansion when requested
raid_disks number is the same as current.
This is wrong. Existing in code condition is too weak.
We should allow for expansion when new disks_number is greater
than current only.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Add support for raid1 to raid0 takeover operation in user space.
This patch includes support for native and imsm metadata.
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
get_disk_controller_domain recognizes Intel (R) SAS controller (isci).
The function returns three different strings that differentiate disk attached
to AHCI, ISCI or unknown controller types to create separate domains
for each case.
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Added support in detail_platform_imsm for Intel (R) SAS controller.
Function supports AHCI and ISCI controllers. RAID properties are derived
from common OROM for both types.
Based on code From: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Pull out the AHCI specific parts of detail_platform_imsm to separate functions.
Introduce support new types of controllers.
Based on code From: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
add_to_super_imsm handler is able to recognize new type of controller.
It stores the controller information in its structures and blocks
mixing of different controller type in the same container.
In this way it maintains compatibility between Linux and Windows IMSM RAID
stacks. IMSM metadata does not allow arrays to span on devices attached to
different storage controllers.
Based on code From: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Marcin Labun <marcin.labun@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Number of failed disks MUST be half of initial number of disks.
If number of failed disks is different we should not update
metadata- data corruption may occur after array reassemlation.
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Implementation of raid0->raid10 takeover metadata update
at process_update level.
- We are using memory previously allocated in prepare_update to
create two dummy disks will be inserted in the metadata and
new imsm_dev structure with expanded disk order table.
- Update indexes in disk list
- Update metadata map
- Update disk order table
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Allocate memory will be used in process_update.
For raid0->raid10 takeover operation number of disks doubles
so we should allocate memory for additional disks
and one imsm_dev structure with extended order table.
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Create metadata update for raid0 -> raid10 takeover.
Because we have no mdmon running for raid0 we have to
update metadata using local update mechanism
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
The patch introduces takeover from level 10 to level 0 for imsm
metadata. This patch contains procedures connected with preparing
and applying metadata update during 10 -> 0 takeover.
When performing takeover 10->0 mdmon should update the external
metadata (due to disk slot and level changes).
To achieve that mdadm calls reshape_super() and prepare
the "update_takeover" metadata update type.
Prepared update is processed by mdmon in process_update().
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
We previously closed all 'fds' associated with an array in
write_init_super .. sometimes, and sometimes at bad times.
This isn't neat and free_super is a better place to close them.
So make sure free_super always closes the fds that the metadata
manager kept hold of, and stop closing them in write_init_super.
Also add a few more calls to free_super to make sure they really do
get closed.
Reported-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Function intended to use for single volume migration.
Function analyze transition and validate if it is supported.
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Function has been divided into two clear parts:
1. Container operations
2. Volume operations
Prototype of imsm_analyze_change function has been added.
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Field info->array.spare_disks is used on begin of reshape_array() to
check if there is enough number of spares to process reshape. During
container_content_imsm() call spare disks are not counted. This
causes that reshape_array() reports that there is not enough spares to
execute reshape.
Patch adds spares counting for reshape process.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When process_update() replaces memory for bigger devices, old memory
areas are collected in a list and has to be assigned in to pointer in
update for later release.
List created from old devices is created and attached to space_list
for later releasing.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Local update is performed based on created update, so this code can broke
local update and it is not necessary as prepare and process update functions
are used.
Code removed.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When update is created by mdadm, local information should be updated
also. This makes us to prepare one update for mdmon and second
"update" to maintain local changes. we can use prepared update for
"local/mdadm" metadata update purposes.
We have 2 cases:
1. when metadata is updated by mdmon, we avoid metadata reloading in
mdadm.
we proceed the same updtate 2 times:
- one time in mdadm for "local update"
- second time in mdmon for real metadat update
2. when metadata is updated by mdadm (no mdmon running) updates are
processed in the same way.
- one time in mdadm for "local update"
- there is no "second time" update but mdadm just flushes
metadata to array
This let us to avoid code duplication by using prepare and process
update functions as for update via mdmon. This makes update
preparing mdmon independent and there is no need to maintain the
same thing in 2 places in code.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Only one spare is passed in update.
When more than one disk is added first spare is passed multiple times.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Slot was set based on anchor information.
Disks information was copied outside disk list area.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Based on status information disks are added to array during grow (in reshape_array()).
This information currently is not present and all disks (old and new) were added to md.
To avoid adding already present disks, disk.state has to be set.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Child_monitor was design to perform 'manage_reshape' for native
arrays. So change the signature for ->manage_reshape to match
child_monitor and move the all to the same place that child_monitor
is called from.
Also give super-intel a manage_reshape handler which simple calls
child_monitor.
Signed-off-by: NeilBrown <neilb@suse.de>
As raid4 is not supported by imsm (this is takeovered raid0)
do not fix degraded raid4 arrays.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When raid0 reshape is performed metadata has to be applied by mdadm.
(without mdmon)
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
For code reuse in raid0 reshape case when monitor is not loaded.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When second array reshape is about to start metadata should be updated
by mdmon in imsm_set_array_state().
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When disks are added size has to increase in metadata.
This size should be used by common code to set size in md when reshape will be finished.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
For general migration function blocks_per_migr_unit() has to return valid value.
If there is no valid return, 0 is returned instead and causes division by 0 error.
Additionally guard in function was added for such case.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When reshape is finished monitor calls set_array_state() and finishes migration in metadata.
This change allows for finishing metadata migration on reshape end.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Add support for reading volume information during migration process.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
During first metadata update imsm for compatibility reason should update
only one array.
Buffers in prepare_update() are prepared for second update as well.
Signed-off-by: NeilBrown <neilb@suse.de>
Meta data was not updated due to the following problems:
1.disk index < 0 was treated as invalid, but this is spare device
2. disk index greater than currently used disks is correct also
3. newmap pointer has to be refreshed for second map copy operation
4. size calculation has to be guarded for shrinking operation
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
When container operation is not allowed user has to get proper information on console about it
Currently this information was displayed as debug info only.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Correct information displayed by '-E' option.
1. FIX: Slot information during raid0 migration is displayed incorrectly
(missing disk position is taken from wrong map)
2. Improvement: information about (level, members, chunk size) migration is displayed.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Allow map related operations for the given map: first of second.
For reshape specific functionality it is required to have an access
Until now, the active map was chosen according to the current volume status.
Signed-off-by: Maciej Trela <maciej.trela@intel.com>
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Czarnowska, Anna
Adam Kwolek
NeilBrown
Krzysztof Wojcik
Labun Marcin