Lenovo ThinkPad P14s (AMD) Gen 4

Hardware	PCI/USB ID	Working?
GPU	`1002:15bf`	Yes
Wifi	`17cb:1103`	Yes
Bluetooth	`10ab:9309`	Yes
Ethernet	`10ec:8168`	Yes
Audio	`1022:15e3`	Mic might not work
TrackPoint		Yes
Touchpad		Yes
Touchscreen		Yes
Webcam	`5986:118c`	Yes
TPM		Yes
Fingerprint reader	`27c6:6594`	Yes
Smartcard reader	`2ce3:9563`	Untested

This article covers the installation and configuration of Arch Linux on a Lenovo ThinkPad P14s (AMD) Gen 4 laptop. With recent enough kernel the device works almost out of the box.

For a general overview of laptop-related articles and recommendations, see Laptop.

Firmware

Warning: There is an issue that can leave your system in broken state when changing sleep states in BIOS. See Lenovo ThinkPad T14 (AMD) Gen 3#Firmware.

This model is fully compatible with fwupd.

fwupdmgr get-devices detects the System Firmware, UEFI BIOS, webcam, fingerprint sensor, CPU/GPU, TPM and the NVMe controller.

CPU

Since kernel 6.5, the AMD P-State EPP driver with "Active" profile is applied by default, no changes should be needed.

In case you are getting GPU resets (black screen), check Lenovo ThinkPad T14s (AMD) Gen 3#CPU.

Tip: You can verify your CPU frequency scaling driver with cpupower or cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver.

Touchpad

To disable sleep wake-up from touchpad see Lenovo ThinkPad T14s (AMD) Gen 3#Disable wakeup from sleep on touchpad activity.

Touchscreen

Note: Not all variations of this model have touchscreen.

The variation of this model with product code/name 21K50009CK is equipped with InfoVision display with touchscreen capability and it works out of the box.

The respective touchscreen input can be found as I2C device ELAN901C:00 04F3:2EDE.

See Touchscreen for other information.

Speakers

Speakers work out of the box. However, they will not have the same sound quality as on Windows due to the missing Dolby Atmos Convolver. The quality can be improved by using EasyEffects with a convolver effect (and possibly others) - see here for an example preset for this laptop.

WiFi

This article or section needs expansion.

Reason: Should clarify after which version of linux-firmware the fix is shipped or if the fix requires a newer kernel too. (Discuss in Talk:Lenovo ThinkPad P14s (AMD) Gen 4)

Starting with kernel v6.10, remaining bugs with the ath11k firmware have been fixed.

However, this patch was found to cause issues with suspend, and was reverted in 6.10.10 as well as 6.11.

Previously, specific ath11k firmware versions caused suspend during lid close to immediately wake from sleep.

Smartcard reader

Seems to work and read cards. Follow instructions from smartcards.

Fingerprint reader

Works as expected. Follow fprintd

Power management

S3 sleep / s2idle

S3 (deep) sleep is not supported by this CPU anymore. However, s2idle works out of the box and causes no problems with sleep / hibernation.

The sleep power consumption with s2idle (or S0/S0ix/Modern Standby) can vary as it depends on the running OS and how well it can put peripherals into sleep mode.

Hibernate

Works fine. If you face WiFi issues after hibernation see #WiFi.

Battery thresholds

Battery charge thresholds can be correctly set with TLP or within KDE / GNOME power management.

AMD P-State EPP

If you are using power-profiles-daemon, please note that the current stable release of it do not fully support AMD P-State EPP. You can switch to TLP version 1.6 or newer that supports AMP P-State features, or fix this using an udev rule + script to apply different AMD P-State EPP states depending on whether the laptop is running on battery or charger.

/etc/udev/rules.d/99-battery.rules

SUBSYSTEM=="power_supply", ATTR{online}=="0", RUN+="/usr/local/bin/on_battery.sh"
SUBSYSTEM=="power_supply", ATTR{online}=="1", RUN+="/usr/local/bin/on_ac.sh"

/usr/local/bin/on_battery.sh

#!/usr/bin/bash

# Change Dirty Writeback Centisecs according to TLP / Powertop
echo '5000' > '/proc/sys/vm/dirty_writeback_centisecs';

# Change AMD Paste EPP energy preference
# Available profiles: performance, balance_performance, balance_power, power
echo 'balance_power' | tee /sys/devices/system/cpu/cpu*/cpufreq/energy_performance_preference;

# If required, change cpu scaling governor
# Possible options are: conservative ondemand userspace powersave performance schedutil
#cpupower frequency-set -g powersave;

# Platform Profiles Daemon will do this automatically, based on your settings in KDE / GNOME
# You can how ever, set this manually as well
# Possible profile options are: performance, powersave, low-power
#echo 'powersave' > '/sys/firmware/acpi/platform_profile';

# Radeon AMDGPU DPM switching does not seem to be supported.
# Possible options should be: battery, balanced, performance, auto
#echo 'battery' > '/sys/class/drm/card0/device/power_dpm_state'; 

# Should always be auto (TLP default = auto)
# Possible options are: auto, high, low
#echo 'auto' > '/sys/class/drm/card0/device/power_dpm_force_performance_level';

# Runtime PM for PCI Device to auto
find /sys/bus/pci/devices/*/power -name control -exec sh -c 'echo "auto" > "$1"' _ {} \;
for i in $(find /sys/devices/pci0000\:00/0* -maxdepth 3 -name control); do
    echo auto > $i;
done

/usr/local/bin/on_ac.sh

#!/usr/bin/bash

# Change Dirty Writeback Centisecs according to TLP / Powertop
echo '500' > '/proc/sys/vm/dirty_writeback_centisecs';

# Change AMD Paste EPP energy preference
# Available profiles: performance, balance_performance, balance_power, power
echo 'balance_performance' | tee /sys/devices/system/cpu/cpu*/cpufreq/energy_performance_preference;

# If required, change cpu scaling governor
# Possible options are: conservative ondemand userspace powersave performance schedutil
#cpupower frequency-set -g performance;

# Platform Profiles Daemon will do this automatically, based on your settings in KDE / GNOME
# You can how ever, set this manually as well
# Possible profile options are: performance, powersave, low-power
#echo 'performance' > '/sys/firmware/acpi/platform_profile';

# Radeon AMDGPU DPM switching does not seem to be supported.
# Possible options should be: battery, balanced, performance, auto
#echo 'performance' > '/sys/class/drm/card0/device/power_dpm_state';

# Should always be auto (TLP default = auto)
# Possible options are: auto, high, low
#echo 'auto' > '/sys/class/drm/card0/device/power_dpm_force_performance_level';

# Runtime PM for PCI Device to on
find /sys/bus/pci/devices/*/power -name control -exec sh -c 'echo "on" > "$1"' _ {} \;
for i in $(find /sys/devices/pci0000\:00/0* -maxdepth 3 -name control); do
    echo on > $i;
done

Additionally make /usr/local/bin/on_battery.sh and /usr/local/bin/on_ac.sh executable.

Power Profiles Daemon

The package power-profiles-daemon is the standard power management service for KDE#Power management and GNOME#Power modes. It conflicts with TLP and the reasons for that are described here: https://gitlab.freedesktop.org/upower/power-profiles-daemon#why-not

Install power-profiles-daemon
Start/enable the power-profiles-daemon service.

Microphone

Reported as unplugged

If the internal mic is recognized by ALSA, but the recorded input is silent, please see: https://bbs.archlinux.org/viewtopic.php?pid=2162297#p2162297

LED

If the Mic LED seems to stay always on see: Lenovo ThinkPad T14 (AMD) Gen 3#Mute Mic LED always on.

Function keys

Key	Visible?¹	Marked?²	Effect	Note
`Fn`	Yes	-	`XF86WakeUp`	Can be swapped with left Ctrl in BIOS
`Fn+4`	Yes	No	`XF86Sleep`
`Fn+Esc`	No	Yes	Toggles Fn lock	Has status led
`Fn+F1`	Yes	Yes	`XF86AudioMute`	Has status led
`Fn+F2`	Yes	Yes	`XF86AudioLowerVolume`
`Fn+F3`	Yes	Yes	`XF86AudioRaiseVolume`
`Fn+F4`	Yes	Yes	`XF86AudioMicMute`	Has status led
`Fn+F5`	Yes	Yes	`XF86MonBrightnessDown`
`Fn+F6`	Yes	Yes	`XF86MonBrightnessUp`
`Fn+F7`	Yes	Yes	`XF86Display`
`Fn+F8`	Yes	Yes	`XF86WLAN`	Marked with airplane mode
`Fn+F9`	Yes	Yes	`XF86Messenger`	Marked with message box
`Fn+F10`	Yes	Yes	`XF86Go`	Marked with phone answer call
`Fn+F11`	Yes	Yes	`Cancel`	Marked with phone end call
`Fn+F12`	Yes	Yes	`XF86Favorites`
`Fn+Tab`	Yes	No	`XF86FullScreen`
`Fn+Left`	Yes	No	`Home`
`Fn+Right`	Yes	No	`End`
`Fn+P`	Yes	No	`Pause`
`Fn+S`	Yes	No	`Sys_Req`
`Fn+K`	Yes	No	`Scroll_Lock`
`Fn+B`	Yes	No	`Break`
`Fn+PrtSc`	Yes	Yes	`XF86Launch2`
`Fn+Space`	No	Yes	Change keyboard backlight level

The key is visible to xev or wev and similar tools.
The physical key has a symbol on it, which describes its function.