Framework Laptop 13 (11th Gen Intel Core)

This article or section needs expansion.

Reason: This page is under construction - read Framework Laptop 13 for the time being (Discuss in Talk:Framework_Laptop_13#Page_per_mainboard)

Hardware	PCI/USB ID	Working?
Wi-Fi		See Table
Audio	`8086:a0c8`	Yes
Touchpad	`093a:0274`	Yes
Keyboard		Yes
Webcam	`0bda:5634`	Yes
Fingerprint reader	`27c6:609c`	Yes
Bluetooth		See Table
TPM		Yes
Ambient Light Sensor		Yes

This article covers the installation and configuration of Arch Linux on a Framework Laptop 13 with a 11th Gen Intel Core mainboard.

For a general overview of laptop-related articles and recommendations, see Laptop.

Installation

Note: Ensure you have linux-firmware installed, as pointed out by Installation guide#Install essential packages before reporting hardware issues on the Arch bug tracker or Framework Community boards. It is an optional dependency of linux and does not automatically get installed as part of base. Without it, much of the hardware will be detected but may not be fully functional. You will see firmware loading issues in the journal.

Display

The display module is uncalibrated from factory, giving a suboptimal default sRGB coverage. It is thus recommended to apply this ICC profile if you have this display in order to have better color reproduction.

Wi-Fi/Bluetooth

Device Name	PCI ID	Bluetooth USB ID	Working?	Bluetooth?	Notes
AX200	`8086:2723`	`8087:0029`	Yes	Yes	Pre-production units
AX201	`8086:a0f0`	`8087:0026`	Yes	Yes	Base/Performance Editions
AX201 vPro			Untested	Untested	Professional Edition
AX210	`8086:2725`	`8087:0032`	Yes	Yes	DIY Edition (Optional)
AX210 vPro	`8086:2725`	`8087:0032`	Yes	Yes	DIY Edition (Optional)

Speakers

By default, the speakers do not sound very balanced due to the downward firing speakers, so you may want to use an equalizer to fix this. The recommended method is to install EasyEffects and use the official preset found here.

Alternatively, you can use user-created profiles such as this one created by cab404.

Fingerprint reader

Install fprint to enable fingerprint authentication.

If you have fitted a replacement fingerprint reader module you will need to upgrade the firmware following the article on the Framework knowledgebase if your reader isn't recognised.

Ambient light sensor

Install iio-sensor-proxy to enable automatic brightness in Gnome. Other desktop environments are unsupported at this time.