Acer Swift 1 SF114-34

From ArchWiki

This article or section does not follow the Laptop page guidelines.

Reason: Hardware table misses some items, the hardware ID for the WiFi card is erroneous, misses accessibility, firmware and function keys sections. (Discuss in Talk:Acer Swift 1 SF114-34)
Hardware PCI/USB ID Working?
WiFi 00:14.3 Yes
Bluetooth 8087:0026 Yes
Webcam 0408:a094 Yes
Fingerprint Sensor 1c7a:0575 No

Information about the Acer Swift 1 SF114-34.

Installation

Press F2 on boot to enter the BIOS. Set a supervisor password under the Security tab and then disable Secure Boot under the Boot tab. You can now remove the supervisor password.

Tip: Enable F12 Boot Menu in the Advanced tab to make it easier to switch boot devices.

Fingerprint sensor

libfprint does not support the model.

Suspension

Suspension does not work, device wakes up immediately.

This article or section needs expansion.

Reason: More testing needed (Discuss in Talk:Acer Swift 1 SF114-34)

Find a "RP" device with enabled status (usually RP05) with the following command: 

$ cat /proc/acpi/wakeup

This is what is causing the issue, and you will need to disable it. Create: 

/etc/systemd/system/fix-suspension.service
[Unit]
Description=Disable devices as wakeup

[Service]
ExecStart=sh -c "echo device_name > /proc/acpi/wakeup"
Type=oneshot

[Install]
WantedBy=multi-user.target

Enable/start it and suspension should now work properly.